SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE

151.28 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
    Capsule: Hand-crafted, 1″ diaphragm, gold-sputtered     Frequency Response: 20Hz-20kHz     Sensitivity: -32 dBV/Pa (25.1mV/Pa)     Polar Pattern: Cardioid     Impedance: ≤ 200 Ohms     Equivalent Noise Level: 16dB (A-weighted)     Max SPL for 0.5% THD @1kHz: 125dB     Power Requirement: Phantom power 48V±4V     Connector: 3-pin XLR

 

Read more

    Capsule: Hand-crafted, 1″ diaphragm, gold-sputtered
    Frequency Response: 20Hz-20kHz
    Sensitivity: -32 dBV/Pa (25.1mV/Pa)
    Polar Pattern: Cardioid
    Impedance: ≤ 200 Ohms
    Equivalent Noise Level: 16dB (A-weighted)
    Max SPL for 0.5% THD @1kHz: 125dB
    Power Requirement: Phantom power 48V±4V
    Connector: 3-pin XLR

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeRODE NT-2A Multipattern Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone remove
NameSE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeRODE NT-2A Multipattern Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone remove
Image
SKUsE X1C414-XLSKSM44SLH11RD00002H11RD00030E005249
Rating
Price151.28 incl. GR VAT1,116.00 incl. GR VAT 938.00 incl. GR VAT 332.00 incl. GR VAT 339.00 incl. GR VAT 57.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

    Capsule: Hand-crafted, 1" diaphragm, gold-sputtered
    Frequency Response: 20Hz-20kHz
    Sensitivity: -32 dBV/Pa (25.1mV/Pa)
    Polar Pattern: Cardioid
    Impedance: ≤ 200 Ohms
    Equivalent Noise Level: 16dB (A-weighted)
    Max SPL for 0.5% THD @1kHz: 125dB
    Power Requirement: Phantom power 48V±4V
    Connector: 3-pin XLR

The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices. The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A. The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter. The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty. Features High sensitivity and extremely low self noise Five switchable polar patterns for placement and application flexibility Two-color LEDs provide quick visual indication of selected polar pattern and output overload Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen High sound pressure level capability and wide dynamic range Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors Specifications Type: 1" large diaphragm pressure gradient microphone Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight Frequency Range: 20 to 20,000 Hz Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB) Preattenuation Pad: -6, -12,-18 dB, switchable Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz Power Requirements: 48 V phantom power to DIN/IEC Connector: 3-pin XLR Dimensions: 2" x 1.5" x 6.3“ Net Weight: 10.6 oz Shipping Weight: 5 lbs (2.27 kg)

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


NT1000 - ?Pure Performance? Ultra Versatile 1? Studio Condenser Microphone.

With its ultra low 6 dBA self-noise and transformer less SMT circuitry, the
R?DE NT1000 exhibits exceptional performance when recording both vocals
and instruments in the studio.
Voiced for ?application versatility?, the NT1000 has been hailed by many as the
ultimate drum over-head and grand piano mic selection. The NT1000 is also
equally at home as a first call vocal mic. With its Australian made 1? HF-2 capsule
incorporating internal shock mounting, the NT1000 boasts a 134 dB dynamic range,
and 140 dBA SPL capabilities and a 20 Hz ? 20 kHz frequency response.
Built of a heavy-duty cast metal satin nickel body, the NT1000 incorporates a
high-strength, heat-treated mesh head, and comes supplied in a zip pouch with a
stand mount.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 1? (25mm) pressure-gradient condenser
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651:
> 88dB (A-weighted, per IEC268-15)
Equvalent noise:
6dB SPL (A-weighted per IEC268-15) +/-1dB
Maximum spl:
> 140dB SPL (@ 1kHz, 1% THD into 1k( load)
Sensitivity:
-36dB re 1V/Pa (16mV @ 94dB SPL) +/-1dB
Dynamic range din iec 651: > 134dB (A-weighted, per IEC268-15)
Power supply voltage: P48 (35V - 53V)
Current consumption: 6mA
Weight without battery: 682 gm
Weight with battery:  882 gm

NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
 
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
 
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range:  20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm

Behringer C-1 Studio Condenser Microphone   Behringer C-1 Studio Condenser Microphone The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
  • Professional large-diaphragm condenser microphone for unsurpassed audio quality
  • Ideal as main and support microphone for studio and live applications
  • Exceptionally flat frequency response and ultra-high sound resolution
  • Cardioid pickup pattern for outstanding sound source separation and feedback rejection
  • Ultra low-noise transformerless FET input circuitry
  • LED indicates phantom power operation
  • Gold-plated 3-pin XLR output connector for perfect signal transmission
  • Ultra-rugged construction with die-cast body
  • Swivel stand mount and carrying case included
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 0.63" / 16.0 mm
Polar Pattern Cardioid
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 136 dB SPL
Impedance 100 Ohms
Load Impedance 1000 Ohms
Sensitivity -33 dB
THD 1%
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 36 to 52 V
Operating Current Consumption 2.5 µA
Physical 0.93 lb / 0.42 kg
Dimensions ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
 
Weight0.20 kg2.27 kg1.00 kg1.50 kg2.90 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 2.27 kg
Weight 1.00 kg
Weight 1.50 kg
Weight 2.90 kg
Weight 0.50 kg