| Content | QuickSmartDSP features best-in-class processing, EVʼs signature single-knob user interface, and intuitive menu navigation via LCD. Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed. High-efficiency 1300 W Class D power amplifier delivers up to 134 dB peak SPL on the EKX-18SP utilizing high-sensitivity transducers designed and engineered by EV. Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions. Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
| Brand |
ELECTRO VOICE |
| Model |
EKX-18SP |
| Part Number |
F01U303390 |
| Speaker Type |
Active |
| Speaker Category |
SubWoofer |
| Construction Material |
Wooden Cabin |
| Total Power (Watt) |
1300 |
| Woofer (inches) |
18 |
| dB (max spl) |
134 |
| Frequency Response (Hz) |
35-180 |
| DSP |
Yes |
| Weight (kg) |
41,2 |
| Color |
Black |
| Application |
Installation, Portable PA |
| Series |
EKX series |
| Warranty |
3 Years |
|
- 1400 Watt Digital Amplifier
- 18" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
- Frequency Response 35 Hz - 120 Hz
- Max Spl: 133 Db
- Hi Pass Freq: 110 Hz
|
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
- Application: Subwoofer
- Output Power: 600 Watt
- Built-in stereo X-over
- Very punchy High-power Subwoofer for Bands and DJʼs
| Model | PR:O 18 Sub A | | Title | PREMIUM PR:O | | Product Class | Active Systems | | Frequency response +/- 3 dB | 48 Hz – Xover | | Frequency response -10 dB | 38 Hz – Xover | | Maximum SPL, @ 10% THD | 125 dB | | Connections | 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced | | LF Speaker | 1x18“ | | X-Over | 75 Hz – 150 HZ, switchable | | Subsonic filter | 35 Hz | | Peak limiter | yes | | RMS-Soundlimiter | no | | Amplifier | 600 W Class D – 4 ohms | | Pole mount | M20 threaded base plate | | Handles | 2, integrated | | Enclosure | MDF | | Grille | metal grille with acoustic foam | | Finish | acrylic painture, black | | Dimensions (WxHxD) | 53 cm x 61 cm x 64 cm | | Weight | 39,8kg / 87.8 lbs. |
|
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
The DSR118W is a compact and high power active subwoofer system that extends the bass of the DSR full range speaker system to below 40Hz. With a high efficiency, low distortion 800W Class-D amplifier and a long travel, cast frame 18" woofer, the DSR118W achieves maximum peak SPL of 132dB. It also features a 35mm pole socket on the top, making it easy to set up a high performance sub/mid-high system.
- All-new 800W Class-D amplifier with PFC switching mode power supply
- Maximum SPL 132dB peak
- Extensive protection of the transducers, amplifiers and power supply
- Premium-grade, custom designed transducers
- Low-frequency extension down to 40Hz
- Compact and lightweight (42kg/ 93lbs)
- Bass-reflex, direct-radiating design
- Top panel pole mount for satelite configuration
- Heavy-duty 16-gauge (1.6mm) steel grille
- Locking IEC cable
General specifications | Speaker type | 18" Powered Subwoofer, Bass-reflex Type | | Frequency range (-10dB) | 40Hz ~ 130Hz | | Frequency response (-3dB) | 50Hz ~ 110Hz | | Components | LF | 18" cone | | Output power | 800W | | Maximum output level (1m; on axis) | 132dB SPL | | I/O connectors | INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT | | Power consumption | 100W | | Pole socket | 35mm (Bottom Board) | | Dimensions | W | 520mm (20 4/8“) | | H | 638mm (25 2/8“) | | D | 584mm (23“) | | Net weight | 42.0kg (93lbs) | |
SPECIFICATIONS
Configuration 18" subwoofer
Transducer
18" cone transducer
Frequency Response (-6 dB) 38 Hz - 124 Hz
Frequency Range (-10 dB) 34 Hz - 143 Hz
Maximum SPL1 135 dB peak
Amplifiers
Power Output2 1000 W Class D continuous
2000 W peak
Input Impedance (ohms) XLR / ¼“: 38k balanced / 19k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net) 88 lb (40 kg)
Available Accessories KW181 COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
|
Reviews
There are no reviews yet.