| Content | Woofer for ELX115, ELX115P, ELX215, 15inch
| Brand |
ELECTRO VOICE |
| Model |
SPP 15 (S-ASY001062000)“ |
| Part Number |
F01U174471 , F.01U.174.471 |
| Sparepart / Accessories Type |
Speaker |
| Category |
Woofer |
| |
The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“. |
| 1600 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 35 – 1500 Hz response |
|
| 97 dB sensitivity |
|
| FEA optimized Neodymium magnet assembly allows the highest force factor and excursion capability |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
| Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg |
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
Reviews
There are no reviews yet.