ELECTRO VOICE D454375 3.5″ Woofer for EVID 3.2

21%
All products by ELECTRO VOICE

€27.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: E003469 Category:
Woofer forα EVID 3.2 Brand ELECTRO VOICE Type Woofer Model D454375 Part Number F01U113266

 

Read more

Woofer forα EVID 3.2

Brand ELECTRO VOICE
Type Woofer
Model D454375
Part Number F01U113266
Weight 1.00 kg
Woofer Inch

Reviews

There are no reviews yet.

Be the first to review “ELECTRO VOICE D454375 3.5″ Woofer for EVID 3.2”

Your email address will not be published. Required fields are marked *

Quick Comparison

ELECTRO VOICE D454375 3.5" Woofer for EVID 3.2 removeBMS BMS5CN140L 5" Neodymium Coaxial Speaker 5CN140 130 W + 60 W 8 Ohm removeB & C Speakers 5-NDL38 Neodymium Speaker 5'' 180W removeBMS BMS5N155H 5'' Neodymium Low/Mid Speaker 5N155 130 W 16 Ohm removeJBL LF LSR 25 Replacement Woofer 5,25" removeJBL HF/LF CONTROL 24C 4" speaker replacement remove
NameELECTRO VOICE D454375 3.5" Woofer for EVID 3.2 removeBMS BMS5CN140L 5" Neodymium Coaxial Speaker 5CN140 130 W + 60 W 8 Ohm removeB & C Speakers 5-NDL38 Neodymium Speaker 5'' 180W removeBMS BMS5N155H 5'' Neodymium Low/Mid Speaker 5N155 130 W 16 Ohm removeJBL LF LSR 25 Replacement Woofer 5,25" removeJBL HF/LF CONTROL 24C 4" speaker replacement remove
Image
SKUE003469BMS5CN140L5-NDL38BMS5N155HJBL-124-10002-00JBL-124-13000-00
Rating
Price €27.00 incl. GR VAT €341.12 incl. GR VAT €135.00 incl. GR VAT €159.87 incl. GR VAT €116.62 incl. GR VAT €109.89 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Woofer forα EVID 3.2

Brand ELECTRO VOICE
Type Woofer
Model D454375
Part Number F01U113266
  • 91 dB sensitivity 1 W / 1 m
  • 130 W + 60 W Power Handling
  • 1.5" + 1.5“ Copper Voice Coil
  • Single Point Source providing coherent Wave Front
  • 90° conical Dispersion
  • Optimal for compact 2-way Systems
  • 180 W continuous program power capacity
  • 38 mm (1.5 in) copper voice coil
  • 90 - 7000 Hz response
  • 90 dB sensitivity
  • Shorting copper cap for extended HF response

SPECIFICATIONS

Nominal Basket Diameter

5" / 127mm

Impedance

8 ohms

RMS Power Rating

90 Watts

Program Power

180 Watts

Frequency Response

90Hz - 7.0kHz

Sensitivity (1W/1m)

90dB

Voice Coil Diameter

1.5" / 38mm

Winding Material

Aluminum

Former Material

Kapton

Winding Depth

.37" / 9.5mm

Magnetic Gap Depth

.24" / 6mm

Flux Density

1.15T

 

MOUNTING INFORMATION

Overall Diameter

5.9" / 150mm

Bolt Circle Diameter

5.6" / 142mm

Baffle Cutout Diameter

4.8" / 122mm

Depth

2.95" / 75mm

Flange & Gasket Thickness

.35" / 9mm

No. Of Mounting Holes

4

Net Weight

1.9 lbs./ .85 kg.

 

THIELE-SMALL PARAMETER

Resonant Frequency (fs)

92Hz

Impedance (Re)

5.5 ohms

Electrical Factor(Qes)

.5

Mechanical Q (Qms)

11

Total Q (Qts)

.48

Compliance Equiv. Vol. (Vas)

3.3 Liters/.12cu. ft.

Voice Coil Overhang (Xmax)

3.3mm

Reference Efficiency

0.5%

BL Factor

8.5 T-M

Coil Inductance(Le)

0.35mH

Surface Area of Cone (Sd)m2

0.0095m2
  • 91 dB Sensitivity 1 W / 1 m
  • 130 W Power Handling
  • 1.5" Sandwich Voice Coil
  • Double treated Cone for Water Protection
  • Neodymium Magnet System
  • Twin Aluminum demodulating Rings for ultra low Distortion
  • Optimal for compact 2- or 3-way Systems

 

LSR25P LF Driver Description:

This is the JBL low frequency driver (MPN 124-10002-00) for the LSR25P powered reference monitor. It is a genuine JBL replacement part sold to you sealed just the way we get it from JBL. The device is mounted in a frame which bolts into the front baffle of the speaker from the inside. You must dismantle the speaker to replace this driver. Order carefully, returns for your mistakes are not allowed.

 

JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.

This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.

Weight1.00 kg1.14 kg1.10 kg0.83 kg1.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Woofer Inch

Weight 1.14 kg
Woofer Inch

Weight 1.10 kg
Woofer Inch

Weight 0.83 kg
Woofer Inch

Weight 1.00 kg
Woofer Inch

Weight 1.00 kg
Woofer Inch

Related products