Content | Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) |
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1 |
Active or Passive Passive Frequency Response -10dB:48-20,000Hz Power Capacity 600W Maximum Sound Pressure Level (SPL) 131dB Nominal Sensitivity 97dB Impedance 8 ohms Crossover 2KHz Low Frequency Driver DVX3121, 12" (305mm) Driver High Frequency Driver ND2, 1" (25.4mm) exit Neodymium Enclosure Material Polypropylene Structural Foam Input Connections Glandnut SJO cable Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) Weight 43.7 lbs (19.8 kg) |
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black This item is BLACK. The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker. • 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications • High output, 131dB SPL capacity • Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor • 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil • Rugged, high-tech polypropylene enclosure • 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
Active or Passive |
Passive |
Frequency Response |
-10dB:48-20,000Hz |
Power Capacity |
600W |
Maximum Sound Pressure Level (SPL) |
131dB |
Nominal Sensitivity |
97dB |
Impedance |
8 Ohms |
Crossover |
2KHz |
Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
Enclosure Material |
Polypropylene Structural Foam |
Input Connections |
Neutrik Speakon NL4\'s x 2 |
Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
Weight |
43.7 lbs (19.8 kg) |
|
Chassis Size 304.8 mm (12“) Color Black Color Unfinished Color White Directivity Index 10.9 dB Input Connections 2 four-pin Speakon Speaker Type Fullrange Frequency Response (-3 dB) 58 - 17000 Hz Frequency Response (-10 dB) 50 - 19000 Hz Internal Crossover No Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 130 dB Coverage (Nominal -6 dB) H° 80 ° Coverage (Nominal -6 dB) V° 55 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.5/13.4 Ω Flying Yes Outdoor No Height 584 mm (22.99“) Width 379 mm (14.92“) Depth 358 mm (14.09“) Weight Net 28.8 kg (63.49 lbs) |
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Reviews
There are no reviews yet.