| Content |
The white Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
| LF Driver |
1 x 12" / 305 mm |
| Input |
Spring-loaded speaker terminals |
| Output |
Spring-loaded speaker terminals |
| Frequency Response |
40 to 140 Hz (-10 dB) |
| Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
| Maximum SPL |
127 dB calculated, 133 dB peak |
| Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
| Low Impedance |
Yes |
| Nominal Impedance |
8 Ohms |
| Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
| Weight |
39.2 lb / 17.8 kg |
|
FB-120B
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg | MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
Passive subwoofer 12“, 400W rms, frequency response 42 - 200Hz, max SPL 127dB, 2 x balanced speakon. 19,8kg, black color.
- 15-mm plywood enclosure, internally braced, with textured paint
- EVS-12S 12" woofer for powerful, engaging bass response
- Pole mount for full-range systems
| Input Connections | NL4 style (2) | | Nominal Impedance | 8 Ω | | Frequency Response (-3 dB) | 53 - 125 Hz | | Frequency Response (-10 dB) | 42 - 200 Hz | | Sensitivity 1 W/1 m | 94 dB | | Max. SPL/1m (calc) | 127 dB | | System Power Handling (Continuous/Program/Peak) | 400 / 800 / 1600 Watts | | LF Transducer | EVS-12S, 305 mm( 12“) Woofer | | Enclosure Material | 9-ply 15 mm plywood, internally braced with textured paint | | Grill | 16 GA steel with black powder coat | | Height | 400 mm (15.75“) | | Width | 444.5 mm (17.5“) | | Depth | 457.2 mm (18“) | | Shipping Weight | 25.4 kg (56 lbs) |
|
Reviews
There are no reviews yet.