ELECTRO VOICE PL37 OVERHEAD CONDENSER CARDIOID MICROPHONE

Audio Frequency Response    50 Hz - 16,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Dynamic Range    107 dB
Element    Condenser (self-biased)
Finish    Textured Satin Black
Impedance, Low-Z balanced    200 Ω
Maximum SPL (1% THD)    132 dB
Mic Type    Instrumental
Open Circuit Voltage    6 mV/Pascal
Polar Pattern    Cardioid
Power Requirement    11 to 52 VDC, 4 mA
Wired/Wireless    Wired
Weight Net    6.21 oz (176 g)

The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.

Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

• Identical acoustics of the legendary CK 1.
• Rugged construction.
• Ruler-flat on-axis frequency response.
• Precise, nearly frequency independent cardioid.
• Extremely accurate signal transfer.
• Transformerless output stage for minimum distortion at low frequencies.
• Protected against electrostatic and magnetic interference.
• Selectable 10-dB and 20-dB preattenuation pads.
• Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
• Operates on phantom power to DIN/IEC between 12 V and 48 V.
• Complete with SA 40 stand adapter and W 90 windscreen.
• Each microphone comes with its own individual frequency response plot.

Specifications:

• Polar pattern: Cardioid
• Frequency range: 20 to 20,000 Hz
• Sensitivity: 9 mV/Pa (-41 dBV)
• Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
• Equivalent noise level (CCIR 468-3): 29 dB
• Equivalent noise level: 18 dB-A
• Signal/noise ratio (A-weighted): 76 dB
• Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
• Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
• Impedance: 1000 ohms
• Supply voltage: 9 to 52 V phantom power to DIN 45596
• Current consumption:

• Frequency response shaped specifically for kick drums and bass instruments
• Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
• Studio quality performance, even at extremely high sound pressure levels
• Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Neodymium magnet for high signal–to–noise ratio output
• Low sensitivity to varying load impedance
• Legendary Shure quality and reliability