ELECTRO VOICE Rx215S 2×15″ Subwoofer 800W

1,964.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
2×15”  800W/3200W Peak  133dB SPL max  4 Ohm  40Hz-125/250Hz  schwarz

 

Read more

2×15”
 800W/3200W Peak
 133dB SPL max
 4 Ohm
 40Hz-125/250Hz
 schwarz

Weight 48.50 kg

Reviews

There are no reviews yet.

Be the first to review “ELECTRO VOICE Rx215S 2×15″ Subwoofer 800W”

Your email address will not be published. Required fields are marked *

Quick Comparison

ELECTRO VOICE Rx215S 2x15" Subwoofer 800W removeRCF MQ 90S: 120 W MAX, 8", COMPACT SUBWOOFER removeYAMAHA SW-10 Studio Monitor removeYAMAHA CW-218V Subwoofer removeAMERICAN AUDIO SENSE-15B SUBWOOFER IN WOODEN CABINET 15'' 450W / 8 Ohm removeTOA FB-120B LOUDSPEAKER-NEW- remove
NameELECTRO VOICE Rx215S 2x15" Subwoofer 800W removeRCF MQ 90S: 120 W MAX, 8", COMPACT SUBWOOFER removeYAMAHA SW-10 Studio Monitor removeYAMAHA CW-218V Subwoofer removeAMERICAN AUDIO SENSE-15B SUBWOOFER IN WOODEN CABINET 15'' 450W / 8 Ohm removeTOA FB-120B LOUDSPEAKER-NEW- remove
Image
SKU001878MQ90SH000.00083H000.00094360056FB-120B
Rating
Price1,964.56 incl. GR VAT239.56 incl. GR VAT 899.00 incl. GR VAT 1,110.96 incl. GR VAT425.38 incl. GR VAT 505.99 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 4 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 4 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

2x15''
 800W/3200W Peak
 133dB SPL max
 4 Ohm
 40Hz-125/250Hz
 schwarz

MQ 90S is a compact band-pass 8” subwoofer. It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers. The cabinet material is MDF with a scratch resistant surface. The subwoofer has internally a transformer for constant voltage lines (100 or 70 V). The power selection is made by means of its selector. It is for indoor use only (avoid to use it in very humid places). It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
Acoustical Specifications
Type Of Speaker: “band-pass" subwoofer
Frequency Response: 70 Hz ÷ 220 kHz
Max SPL @ 1m: 107 dB
Power Handling: 60 Watt RMS
Peak Power Handling: 120 Watt PEAK
System Sensitivity: 89 dB
Impedance: 16 Ω
Crossover frequencies: 200 Hz
TRANSDUCERS
Speaker: 8“
INPUT SECTION
Input connector: Removable 4 pole Euroblock
Constant voltage: 100 V, 70 V V
Power Selection: 60 - 30 - 15 - 7.5 W (100 V)
CABINET
Hardware: Material PVC
Colour: White / Black
PHYSICAL SPECIFICATIONS
Height: 300 / 11.81
Width: 203 / 7.99
Depth: 400 / 15.74
Net Weight: 8.06 / 17.76
SHIPPING INFORMATION
Package height: 370 / 14.56
Package width: 265 / 10.43
Package depth: 470 / 18.50
Shipping Weight: 9.24 / 20.59

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.

The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.

Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.

SPECIFICATIONS

- Woofer: 15” AA PA15000, aluminum basket, 100mm Voicecoil
- Power Handling
  450W continuous
  900W program
  1800W peak
- Recommended input power: 300-600 W @ 8Ohm
- Components: 15” Long excursion woofer
- Sensitivity (Half Space):
  102dB SPL
  135dB Peak
- Freq. response: (-3dB): 45Hz - 200Hz
- Freq. range(-10dB): 40Hz - 250Hz
- Impedance: 8Ohm
- Finish: black structure paint
- Protective Grid: powder coated steel grill with acoustic foam
- Connector: 2x NL4 Speaker
- Handle: 2 handles on the sides
- Pole mount: integrated (M20)
- Cabinet: plywood
- Dimensions (LxWxH): 430x550x550mm
- Weight: 26,5kg

FEATURE OVERVIEW
- Perfect harmonized components and case details
- High efficiency
- First class mechanical manufacture for day-to-day operations
- Equipped with optimized 15” LF driver
- Large optional accessory range
- Ideal for mobile and install applications

FB-120B

Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W

Impedance: 8Ω

Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field

Frequency Response: 40Hz-1.2kHz (+/-10dB)

Dimensions: 16“?16“?17.75" (W?H?D)

Weight: 15kg

Weight48.50 kg9.24 kg26.50 kg65.40 kg50.90 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 48.50 kg
Weight 9.24 kg
Weight 26.50 kg
Weight 65.40 kg
Weight 50.90 kg
Weight 15.00 kg