Content |
- Ultra-compact 2-way 5-1/4" short-throw monitor system with 160 watts continuous power handling
- Perfect for background/foreground music applications, indoors and out
- Low-flux-leakage design enables use in close proximity to video monitors
- 1" direct-radiating soft dome tweeter HF section
- Black paintable molded polystyrene enclosure
|
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam
|
Roadboy 65 passive slave speaker unit - 30 W RMS
- 120 W Peak
- 3.6 kg
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
- Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
- Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
- High 30W rated input power and 91 dB output sound pressure level.
- Durable, acoustically efficient polypropylene enclosure.
- Optional wall/under-eaves mounting bracket.
Specification |
|
Enclosure Type |
Bass-reflex type |
Speaker Component |
Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm) |
Impedance |
100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W) |
Rated Input Power |
30W |
Output Sound Pressure Level |
91 dB (1W/1m)** |
Crossover Frequency |
4kHz (passive network) |
Frequency Response |
100-20,000Hz (-10dB), 150-13,000Hz (-3dB) |
Input Connector |
Push terminal |
Enclosure Material |
Polypropylene resin |
Color |
Dark gray |
Dimensions |
(W x H x D): 250 x 157 x 169mm |
Weight |
approx. 3.9kg |
|
** Pink noise of 330~3,300Hz |
|
Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
Reviews
There are no reviews yet.