ELECTRO VOICE EKX-15S 1600 W (peak), 133 dB peak SPL

1600 W (peak), 133 dB peak SPL on the EKX-15S utilizing highsensitivity transducers designed and engineered by EV. Lightweight, compact 15-mm wood enclosure with internal bracing, and durable EVCoat finish. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two bars on the EKX-18S). M20 threaded pole mount plate.

The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.

The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.

Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.

Frequency Range (-10 dB):     40 Hz – 4.2 kHz
Frequency Response (±3 dB):     47 Hz - 3.0 kHz
Transducer Power Rating (AES):     1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC):     600 W (2400 W peak), 100 hrs
Maximum SPL:     50 Hz –125 Hz
125 Hz – 800 Hz:     126 dB-SPL cont avg
(dB-SPL, 1W @ 1m):     50 Hz – 125 Hz
125 Hz – 800 Hz:     97 dB
Nominal Impedance:     8 ohms
Low Frequency Driver:     1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure:     Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment:     13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish:     Black DuraFlex™ finish.
Grille:     Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector:     NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications:     Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation):     548 x 561 x 657 mm
Net Weight:     25.9 kg (57 lb)
Optional Accessories:     M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.

In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.

Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.

Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 15" EVS-15S
Impedance 8 ohms
Rated Power 500 W
Peak Power 2000 W
SPL 1W/1m 93 dB
max. SPL 1m calc. 125 dB
Freq. Range 40 Hz - 260 Hz
Dimensions (WxHxD) mm 445 x 605 x 550
Net. Weight 28,5 kg