ELECTRO VOICE TX1152FM 1 x 15″ Floor Monitor, 100 dB, 500 W cont. Black

Color    Black
Input Connections    Parallel Neutrik® NL4
Speaker Type    Fullrange
Frequency Response (-3 dB)    65 - 20000 Hz
Frequency Response (-10 dB)    45 - 20000 Hz
Internal Crossover    Yes
Recommended High-Pass Frequency    45 Hz
Sensitivity 1 W/1 m    100 dB
Max. SPL/1m (calc)    133 dB
Coverage
(Nominal -6 dB) H°    90 °
Coverage
(Nominal -6 dB) V°    50 °
Rotatable Horn    No
System Power Handling (Continuous/Program/Peak)    500 Watts
LF Transducer    SMX2151
HF Transducer    DH3
Crossover Frequency    1750 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6.2 Ω
Enclosure Material    Plywood and MDF with EVCOAT
Flying    No
Height    475 mm (18.7“)
Width    439 mm (17.28“)
Depth    655 mm (25.79“)
Weight Net    23.5 kg (51.81 lbs)

Professional Sound Tools for Musicians
 
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.

Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.

Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.

PREMIUM PR:O - PR:O 15 X
 
Description  The multi-talented prodigy in the PREMIUM PR:O family. The
Description  housing shape enables the PR:O 15 X to be used as a main
Description  PA or a monitor speaker.
Power handling capacity  RMS: 400 W
Power handling capacity  Program: 800 W
Frequency response within +/-3dB  60 Hz ? 19 kHz
Frequency response @ -10dB  53 Hz- 19 kHz
Speaker  1x 15?
Impedance  8 Ohm
HF driver  1?
Axial sensitivity 1w/1m half-space  104 dB
Maximum SPL 10% THD half-space  128 dB
Crossover frequency  2 kHz/12 db Octave
Connections  2x Speakon
Mounting collar  DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar  orientation of the speakers towards the audience
Rigging points  side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD)  47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD)  18 1/2? x 24 1/4? x 17 1/2?
Weight  21.6 kg
Weight  47.52 lbs

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Features :

Compact and low-profile for minimal obstruction of audience sight-lines.

70°x 70° nominal coverage.

Bi-amplified or full-range passive operation.

Pole socket for applications requiring pole or tripod mounting.

High power handling, low distortion Vented Gap Cooling™ LF driver.

3 in. (diaphragm) neodymium magnet compression driver.

Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.

14-Gauge steel grille lined with acoustically transparent cloth.



Specifications :

Frequency Range ( –10 dB) : 50 Hz-20 kHz

Frequency Response (± 3 dB) : 75 Hz-20 kHz

Coverage Pattern : 70˚ × 70˚ nominal

Sensitivity (1W/1m) : 95 dB

Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)

Rated Maximum SPL : 130 dB SPL Peak

Nominal Impedance : 8Ω

Input Connectors : Two NL4

Operational Modes : Full Range/Bi-Amp

Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)

Net Weight : 19 kg ( 42 lbs)

User's Manual

Features :           Specifications :

    Compact and low-profile for minimal obstruction of audience sight-lines.

    70°x 70° nominal coverage.

    Bi-amplified or full-range passive operation.

    Pole socket for applications requiring pole or tripod mounting.

    Twelve M10 suspension points.

    High power handling, low distortion Vented Gap Cooling™ LF driver.

    3 in. (diaphragm) neodymium magnet compression driver.

    Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.

    14-Gauge steel grille lined with acoustically transparent cloth.

         
Frequency Range ( –10 dB)       :       41 Hz-20 kHz

Frequency Response (± 3 dB)       :       55 Hz-20 kHz

Coverage Pattern       :       70˚ × 70˚ nominal

Sensitivity (1W/1m)       :       96 dB

Power Rating
(Cont. Pink Noise/Program/Peak)       :       800 W / 1600 W / 3200 W
(Continuous/Program/Peak)

Rated Maximum SPL       :       131 dB SPL Peak

Nominal Impedance       :       8Ω

Input Connectors       :       Two NL4

Operational Modes       :       Full Range/Bi-Amp

Dimensions (H x W x D)       :       721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)

Net Weight       :       26 kg (58 lbs

The CS2.1 Cuban Speaker features a 2" full range loudspeaker with a shielded neodymium magnet, which is capable of producing up to 10 W RMS, with a maximum of 20 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.

• Model Name / Type: AUCS2.1 / cuban speaker
  
• Max . Power: 20 W
• RMS Power: 10 W
• Sensitivity (1 W / 1 m): 85 dB
• Max. SPL: 95 dB
• Impedance: 8 ohms
  
• Frequency Response (±3 dB): 250 Hz - 18 kHz
• Dimensions (W x H x D): 102 x 102 x 90 mm