Content |
Chassis Size 457.2 mm (18“)
Color Black
Input Connections 2 Neutrik® NL8
Speaker Type Line Arrays
Speaker Type Subs
Frequency Response (-3 dB) 33 - 400 Hz
Frequency Response (-10 dB) 35 - 500 Hz
Recommended High-Pass Frequency 33 Hz
Sensitivity 1 W/1 m 103 dB
Max. SPL/1m (calc) 140 dB
Coverage
(Nominal -6 dB) H° 200 °
Coverage
(Nominal -6 dB) V° 325 °
System Power Handling (Continuous/Program/Peak) 1200 Watts
LF Transducer EVX180B
LF Nominal Impedance 4 Ω
Flying Yes
Outdoor No
Height 494.3 mm (19.46“)
Width 1245 mm (49.02“)
Depth 740 mm (29.13“)
Weight Net 92 kg (202.83 lbs)
|
The Sub 2.18 is a double 18“, high-power subwoofer for very high sound pressure levels: sensitivity 102 dB 1W / 1m, max. SPL 138 dB. Boasting power handling of 1000W continuous and 4000W peak, the Sub 2.18 can be used universally for active two-way or three-way systems. It is above all, however, the ideal companion to the C 25.2 for the creation of an active two-way system together with the DSP 260 or DSP 600 controllers and power amplifiers from the SL or LX series. For easier transport, the Sub 2.18 is prepared for the optionally available DC-WK-C18 wheel kit. Cabinet Subwoofer Configuration Vented Direct Radiator Components 2x 18" EVS-18S Impedance 4 ohms Rated Power RMS 1000 W Peak Power 4000 W SPL 1W/1m 102 dB max. SPL 1m calc. 138 dB Freq. Range 35 Hz - 250 Hz Dimensions (WxHxD) mm 513 x 1200 x 710 Net. Weight 66,3 kg Wheel Kit
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker. The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 720 W | Rated Impedance | 8 Ω | Sensitivity | 95 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when using DP-0206 (option)) | Crossover Frequency | 80 Hz (when using DP-0206 (option)) | Speaker Component | 46 cm cone-type | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, paint
Front grille: Punched steel plate, black, acrylic paint | Dimensions | 740 (W) × 573 (H) × 698 (D) mm | Weight | 66 kg (including accessories) | Accessory | Joint plate …2, Joint plate mounting bolt (M10) …16 | Option | Rigging frame: SR-RF12
Digital processor: DP-0206 |
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The EV Rx118 Si 18-inch subwoofer system with 600 watts continuous, 2,400 watt peak power handling. Delivers 126 dB SPL 1 w/1 m (132 dB peaks 1 w/1 m) at full power EVX-180B 4-inch voice coil driver for maximum LF reproduction power with minimum enclosure volume.
Delivers solid bass response to 36 Hz Enclosure is the same width as QRx115 for easy stacking and transportation. Includes 1-3/8-inch stand mount and 30-inch steel pole for use with full range cabinets without the need for extra mounting stands. Enclosure is built from 13-ply, void-free, grain-oriented birch plywood finished with Futura, a sprayed-on polyurethane finish that is very rugged. Available in black or white finishes.
RX118 Features
- Direct radiating vented design
- High Sensitivity
- Solid Bass down to 36 Hz (-10 dB)
- 2 x four pin Speakon connectors
- Wheel Kit Available
- Dimensions: 900mm H x 450mm W x 600mm D
- Weight: 47.5 kg
|
Reviews
There are no reviews yet.