EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms

51.77 incl. GR VAT

In stock

EAN: 4049521115981
Installments calculation
CompareAdd to wishlist Submit Better Price
1″ high-frequency Driver 35 W 8 Ohms Version 2 SPECIFICATION Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1 ” Voice Coil 25.4 mm Overall diameter 69.9 mm Depth 64.3 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 35 W Sensitivity (horn 1 W / 1 m) 104.7 recommended […]

 

Read more

1″ high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION

Product type

High-frequency Drivers


Nominal Diameter

1 ”


Nominal Diameter

25.4 mm


Voice Coil

1 ”


Voice Coil

25.4 mm


Overall diameter

69.9 mm


Depth

64.3 mm


Nominal Impedance

8 Ohm(s)


Nominal Load Capacity

35 W


Sensitivity (horn 1 W / 1 m)

104.7


recommended crossover frequency

3500 Hz


Voice Coil Carrier

Kapton


Diaphragm material

Phenolic


Magnet

Ferrite


Threaded connector

1 3/8″ 18 UNEF ext.


Weight

0,8 kg

Weight 0.80 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-500 Driver 1" 80W, 107dB remove
NameEMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-500 Driver 1" 80W, 107dB remove
Imagede610 de-610 driver bc speakers speaker horn
SKUEAPT50V2DE-852426JDE-610DE-16DE-500
Rating
Price 51.77 incl. GR VAT 206.66 incl. GR VAT 479.00 incl. GR VAT 201.00 incl. GR VAT 99.20 incl. GR VAT 191.99 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response
Content

1" high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION Product type High-frequency Drivers


Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1 "
Voice Coil 25.4 mm
Overall diameter 69.9 mm
Depth 64.3 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 35 W
Sensitivity (horn 1 W / 1 m) 104.7
recommended crossover frequency 3500 Hz
Voice Coil Carrier Kapton
Diaphragm material Phenolic
Magnet Ferrite
Threaded connector 1 3/8" 18 UNEF ext.
Weight 0,8 kg

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

70W AES compression driver, 1.75 διάφραγμα τιτανίου, 16Ω

The model 2426H is a professionalquality high frequency compressiondriver which incorporates JBL'stitanium diamond diaphragm. Thistitanium diamond structure combinesthe ruggedness of phenolic andcomposite-type diaphragms with theoutstanding frequency response offragile aluminum and exotic metaldiaphragms.

JBL's exclusive suspension, consistingof a three-dimensional diamondpattern, reduces bendingstresses in the diaphragm supportstructure. The depth of the diamondpattern is closely controlled toprovide predictable frequencies forthe 2nd and 3rd normal resonancemodes and for the basic suspensionresonance.

The mathematically determinedphasing plug consists of concentricexponential horns to minimize phasecancellations. Phasing plug, throat exittube and diaphragm assemblies areidentical to the previous model.

All cast parts and tolerances are held to the same levels traditionally associated with JBL designs. Additionally the press-fit assembly and interlocking parts assure greater resistance to the mechanical shock. Diaphragm assemblies are rim centered rather than pin mounted, for instant interchange ability and ease of field service.Mounting is provided for standard25 mm (1 in) three bolt pattern. The front snout may be removed(unscrewed) to allow standard 1 3/8" -18 screw mounting. Through holes for external attachment points are also provided. A machined ring of copper surrounds the pole piece to counteract the inductance of the voice coi1 at high frequencies. After manufacture, the frequency response of each driver is tested for conformity to rigid performance standards.

The 2426H is offered in an 8 ohm impedance, and the otherwise identical 2426J is offered in a 16 ohm impedance.

 

The 2426H features a removable flange to expose a 1 3/8“-18 snout for screw-on type horns.

Specifications:

  • Throat Diameter: 25 mm (1 in)

  • Nominal Impedance:2426H - 8 ohms2426J - 16 ohms

  • Minimum Impedance: 5 ohms (H), 9 ohms (J) @ 5 kHz

  • D.C. Resistance: 3.3 ohms (H), 6.5 ohms (J) +/- 10% @ 25C

  • Power Capacity:70 W continuous program above 800 Hz100 W continuous Program above 1.2 kHz

  • Sensitivity:107 dB SPL, 1 W @ 1 m, JBL 2344A horn110 dB SPL, 1 W @ 1 m, JBL 2370A horn117 dB SPL, 1 mW on plane wave tubes

  • Nominal Efficiency: 25% (800 Hz to 2.5 kHz)

  • Frequency Range: 500 Hz to 20 kHz

  • Recommended Crossover4: 800 Hz or higher, 12 dB/octave slope minimun

  • Diaphragm: 0.05 mm (0.002 in) pure titanium

  • Voice Coil Diameter: 44 mm (1% in)

  • Voice Coil Material: Edgewound aluminum ribbon

  • Flux Density: 1.8 T (18,000 gauss)

  • Bl Factor:6.3 N/A(H)9.3 N/A (J)

  • Positive voltage to black terminal gives diaphragm motion toward phasing plug

  • Mounting:Three 1/4-20 threaded holes, 120 apart on 57.2 mm

  • (2-1/4 in) diameterFront snout may be removed (unscrewed) to expose standard 1 3/8 in -18 screw threads
  • Dimensions: 149 mm (5 7/8 in) diameter, 104 mm (4 1/8 in) depth

  • Net Weight: 4.3 kg (9-1/2 lb)
160 W continuous program power capacity 1.4" horn throat diameter 65 mm (2.5 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 108 dB sensitivity Shorting copper cap for extended HF response
Product type Compression driver
Brand B&C Speakers
Reference DE610
Product code DRV6108

Informations

Nominal impedance 8 ohm
Dimensional category 6 inch
Manufacturer sensitivity 108 dB
Nominal power handling 30 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1200 Hz
Exit dimension 1.4 inch

Fundamental parameters

Le 0.15 mH

Datas

Flux density 1.75 T
Zmin 8.2 ohm
Weight ~3.8 kg

Dimensions

Voice coil diameter 2.5 inch
Outside diameter 156 mm
Depth 65 mm
Driver dimensions mouting holes 6.0 mm
Driver mounting system 4 points on diameter 101.6 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Titanium
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations

Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.11 mH

Datas

Flux density 1.9 T
Zmin 7.8 ohm

Dimensions

Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium
Weight0.80 kg4.50 kg4.50 kg5.00 kg1.70 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.80 kg
Weight 4.50 kg
Weight 4.50 kg
Weight 5.00 kg
Weight 1.70 kg
Weight 5.00 kg