EMINENCE EASD1001 ASD1001 – 1″ Compression Driver 50 W 8 Ohms

17%
Eminence Audio
All products by EMINENCE

€54.36 incl. GR VAT

In stock

EAN: 4049521024825
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: EASD1001 Category:
ASD:1001 HF Drivers Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1.3 ” Voice Coil 33 mm Overall diameter 88.9 mm Depth 62 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 50 W Sensitivity (horn 1 W / 1 m) 104.3 Frequency response 2500 – 20000 Hz recommended crossover […]

 

Read more

ASD:1001 HF Drivers

Product type
High-frequency Drivers

Nominal Diameter
1 ”

Nominal Diameter
25.4 mm

Voice Coil
1.3 ”

Voice Coil
33 mm

Overall diameter
88.9 mm

Depth
62 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
50 W

Sensitivity (horn 1 W / 1 m)
104.3

Frequency response
2500 – 20000 Hz

recommended crossover frequency
2500 Hz

Voice Coil Carrier
aluminium

Diaphragm material
Diamond Titanium

Magnet
Ferrite

Recommended horn
LH290S

Threaded connector
1 3/8″ 18 UNEF ext.

Weight
1 kg

Weight 0.90 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EASD1001 ASD1001 – 1″ Compression Driver 50 W 8 Ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EASD1001 ASD1001 - 1" Compression Driver 50 W 8 Ohms removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-64TN Driver 2", 110W, 107.5dB, 0.5-18kHz, 4.1kg removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB remove
NameEMINENCE EASD1001 ASD1001 - 1" Compression Driver 50 W 8 Ohms removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-64TN Driver 2", 110W, 107.5dB, 0.5-18kHz, 4.1kg removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB remove
ImageB & C Speakers DE-12 Driver 40WRMS, 106,5dB 16ohmde610 de-610 driver bc speakers speaker horn
SKUEASD1001DE-12 16DE-64TNDE-16DE-750TNDE-610
Rating
Price €54.36 incl. GR VAT €74.76 incl. GR VAT €253.00 incl. GR VAT €99.20 incl. GR VAT €359.00 incl. GR VAT €201.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 50 W continuous program power capacity
  • 1" horn throat diameter
  • 36 mm (1.4 in) aluminium voice coil
  • Polyester diaphragm
  • 1500 - 18000 Hz response
  • 106 dB sensitivity
Content

ASD:1001 HF Drivers

Product type High-frequency Drivers
Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1.3 "
Voice Coil 33 mm
Overall diameter 88.9 mm
Depth 62 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 50 W
Sensitivity (horn 1 W / 1 m) 104.3
Frequency response 2500 - 20000 Hz
recommended crossover frequency 2500 Hz
Voice Coil Carrier aluminium
Diaphragm material Diamond Titanium
Magnet Ferrite
Recommended horn LH290S
Threaded connector 1 3/8" 18 UNEF ext.
Weight 1 kg

General
Product type Compression driver
Brand B&C Speakers
Reference DE12
Product code DRV01216

Informations
Nominal impedance 16 ohm
Dimensional category 3.5 inch
Manufacturer sensitivity 106 dB
Nominal power handling 20 W
Bandwidth 1500÷18000 Hz
Recommended min cutoff frequency 2200 Hz
Exit dimension 1.0 inch

Fundamental parameters
Le 0.19 mH

Datas
Flux density 1.45 T
Zmin 10.9 ohm
Weight ~1 kg

Dimensions
Voice coil diameter 1.4 inch
Outside diameter 90 mm
Depth 49 mm
Driver dimensions mouting holes 5.0 mm
Driver mounting system 2 points on diameter 76 mm

Shape & Materials
Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Polyester
220 W continuous program power capacity
2” horn throat diameter
75 mm (3 in) aluminium voice coil
500 – 18000 Hz response
107.5 dB sensitivity
Shorting copper cap for extended HF response
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response160 W continuous program power capacity 1.4" horn throat diameter 65 mm (2.5 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 108 dB sensitivity Shorting copper cap for extended HF response
Product type Compression driver
Brand B&C Speakers
Reference DE610
Product code DRV6108

Informations
Nominal impedance 8 ohm
Dimensional category 6 inch
Manufacturer sensitivity 108 dB
Nominal power handling 30 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1200 Hz
Exit dimension 1.4 inch

Fundamental parameters
Le 0.15 mH

Datas
Flux density 1.75 T
Zmin 8.2 ohm
Weight ~3.8 kg

Dimensions
Voice coil diameter 2.5 inch
Outside diameter 156 mm
Depth 65 mm
Driver dimensions mouting holes 6.0 mm
Driver mounting system 4 points on diameter 101.6 mm

Shape & Materials
Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Titanium
Weight0.90 kg1.5 kg4.10 kg1.70 kg5.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.90 kg
Weight 1.5 kg
Weight 4.10 kg
Weight 1.70 kg
Weight 5.00 kg
Weight 5.00 kg

Related products