EMINENCE EASD1001B 1″ Compression Driver 50 W 8 Ohms FLAT

17%
Eminence Audio
All products by EMINENCE

€54.36 incl. GR VAT

Available on backorder

EAN: 4049521380334
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: EASD1001B Category:
Eminence ASD 1001 B 1″ high-frequency Driver 8 Ohms 50 W Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1.3 ” Voice Coil 33 mm Overall diameter 88.9 mm Depth 62 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 50 W Sensitivity (horn 1 W / 1 m) 104.3 […]

 

Read more

Eminence ASD 1001 B
1″ high-frequency Driver 8 Ohms 50 W

Product type
High-frequency Drivers

Nominal Diameter
1 ”

Nominal Diameter
25.4 mm

Voice Coil
1.3 ”

Voice Coil
33 mm

Overall diameter
88.9 mm

Depth
62 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
50 W

Sensitivity (horn 1 W / 1 m)
104.3

Frequency response
2500 – 20000 Hz

recommended crossover frequency
2500 Hz

Voice Coil Carrier
Aluminium

Diaphragm material
Diamond Titanium

Magnet
Ferrite

Recommended horn
LH290B

Threaded connector
M6

Weight
0,952 kg

Weight 0.90 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EASD1001B 1″ Compression Driver 50 W 8 Ohms FLAT”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EASD1001B 1" Compression Driver 50 W 8 Ohms FLAT removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm remove
NameEMINENCE EASD1001B 1" Compression Driver 50 W 8 Ohms FLAT removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-610 Driver 8Ohm 1,4" 160W Program,108dB removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm remove
Imagede610 de-610 driver bc speakers speaker horn
SKUEASD1001BDE-45DE-750TNDE-610DE-16DE-200
Rating
Price €54.36 incl. GR VAT €136.15 incl. GR VAT €359.00 incl. GR VAT €201.00 incl. GR VAT €99.20 incl. GR VAT €124.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentEminence ASD 1001 B 1" high-frequency Driver 8 Ohms 50 W Product type High-frequency Drivers
Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1.3 "
Voice Coil 33 mm
Overall diameter 88.9 mm
Depth 62 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 50 W
Sensitivity (horn 1 W / 1 m) 104.3
Frequency response 2500 - 20000 Hz
recommended crossover frequency 2500 Hz
Voice Coil Carrier Aluminium
Diaphragm material Diamond Titanium
Magnet Ferrite
Recommended horn LH290B
Threaded connector M6
Weight 0,952 kg

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response160 W continuous program power capacity 1.4" horn throat diameter 65 mm (2.5 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 108 dB sensitivity Shorting copper cap for extended HF response
Product type Compression driver
Brand B&C Speakers
Reference DE610
Product code DRV6108

Informations
Nominal impedance 8 ohm
Dimensional category 6 inch
Manufacturer sensitivity 108 dB
Nominal power handling 30 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1200 Hz
Exit dimension 1.4 inch

Fundamental parameters
Le 0.15 mH

Datas
Flux density 1.75 T
Zmin 8.2 ohm
Weight ~3.8 kg

Dimensions
Voice coil diameter 2.5 inch
Outside diameter 156 mm
Depth 65 mm
Driver dimensions mouting holes 6.0 mm
Driver mounting system 4 points on diameter 101.6 mm

Shape & Materials
Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Titanium
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity
Weight0.90 kg2.00 kg5.00 kg5.00 kg1.70 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.90 kg
Weight 2.00 kg
Weight 5.00 kg
Weight 5.00 kg
Weight 1.70 kg
Weight 2.00 kg

Related products