EMINENCE EASD1001B 1″ Compression Driver 50 W 8 Ohms FLAT

17%
Eminence Audio
All products by EMINENCE

€54.36 incl. GR VAT

Available on backorder

EAN: 4049521380334
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: EASD1001B Category:
Eminence ASD 1001 B 1″ high-frequency Driver 8 Ohms 50 W Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1.3 ” Voice Coil 33 mm Overall diameter 88.9 mm Depth 62 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 50 W Sensitivity (horn 1 W / 1 m) 104.3 […]

 

Read more

Eminence ASD 1001 B
1″ high-frequency Driver 8 Ohms 50 W

Product type
High-frequency Drivers

Nominal Diameter
1 ”

Nominal Diameter
25.4 mm

Voice Coil
1.3 ”

Voice Coil
33 mm

Overall diameter
88.9 mm

Depth
62 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
50 W

Sensitivity (horn 1 W / 1 m)
104.3

Frequency response
2500 – 20000 Hz

recommended crossover frequency
2500 Hz

Voice Coil Carrier
Aluminium

Diaphragm material
Diamond Titanium

Magnet
Ferrite

Recommended horn
LH290B

Threaded connector
M6

Weight
0,952 kg

Weight 0.90 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EASD1001B 1″ Compression Driver 50 W 8 Ohms FLAT”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EASD1001B 1" Compression Driver 50 W 8 Ohms FLAT removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz remove
NameEMINENCE EASD1001B 1" Compression Driver 50 W 8 Ohms FLAT removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz remove
Image
SKUEASD1001BDE-2002446HDE-16DE-1000DE-85
Rating
Price €54.36 incl. GR VAT €124.00 incl. GR VAT €901.03 incl. GR VAT €99.20 incl. GR VAT €524.22 incl. GR VAT €206.66 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)In stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentEminence ASD 1001 B 1" high-frequency Driver 8 Ohms 50 W Product type High-frequency Drivers
Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1.3 "
Voice Coil 33 mm
Overall diameter 88.9 mm
Depth 62 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 50 W
Sensitivity (horn 1 W / 1 m) 104.3
Frequency response 2500 - 20000 Hz
recommended crossover frequency 2500 Hz
Voice Coil Carrier Aluminium
Diaphragm material Diamond Titanium
Magnet Ferrite
Recommended horn LH290B
Threaded connector M6
Weight 0,952 kg
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
280 W continuous program power capacity
1.5” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Weight0.90 kg2.00 kg5.00 kg1.70 kg3.40 kg4.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.90 kg
Weight 2.00 kg
Weight 5.00 kg
Weight 1.70 kg
Weight 3.40 kg
Weight 4.50 kg

Related products