EMINENCE EB12B Beta-12 12” 250 W 16 Ohm SPEAKER

Discontinued

87.04 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
BETA- 12A Series Standard American Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also works well for PA in a sealed or bandpass enclosure. SPECIFICATION Nominal Basket Diameter 12“, 304.8 mm Nominal Impedance 16 ohms Power Rating Watts 250 W / Music Program 500 W Resonance 47 Hz […]

 

Read more

BETA- 12A Series Standard American

Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also
works well for PA in a sealed or bandpass enclosure.

SPECIFICATION

  • Nominal Basket Diameter 12“, 304.8 mm
  • Nominal Impedance 16 ohms
  • Power Rating Watts 250 W / Music Program 500 W
  • Resonance 47 Hz
  • Usable Frequency Range 43 Hz – 3.8 kHz
  • Sensitivity 98
  • Magnet Weight 38 oz.
  • Gap Height 0.312“, 7.92 mm
  • Voice Coil Diameter 2“, 50.8 mm

THIELE & Small Parameters

  • Resonant Frequency (fs) 47 Hz
  • DC Resistance (Re) 5.0
  • Coil Inductance (Le) 0.64 mH
  • Mechanical Q (Qms) 6.00
  • Electromagnetic Q (Qes) 0.50
  • Total Q (Qts) 0.46
  • Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 237 cc
  • Mechanical Compliance of Suspension (Cms) 0.29 mm/N
  • BL Product (BL) 10.8 T-M
  • Diaphragm Mass inc. Airload (Mms) 40 grams
  • Efficiency Bandwidth Product (EBP) 94
  • Maximum Linear Excursion (Xmax) 4.4 mm
  • Surface Area of Cone (Sd) 538.9 cm²
  • Maximum Mechanical Limit (Xlim) 11 mm

MOUNTING Information

  • Recommended Enclosure Volume
    Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft.
    Vented 36.8-139 liters/1.3-4.9 cu.ft.
  • Overall Diameter 12.03“, 305.5 mm
  • Baffle Hole Diameter 10.95“, 278.1 mm
  • Front Sealing Gasket standard fitted as standard
  • Rear Sealing Gasket standard fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 11.59“, 294.3 mm
  • Depth 4.57“, 116 mm

MATERIALS of Construction

  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented and extended core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
Weight 3.72 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EB12B Beta-12 12” 250 W 16 Ohm SPEAKER”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EB12B Beta-12 12'' 250 W 16 Ohm SPEAKER removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeEMINENCE EB12A Beta-12 12'' 250 W 8 Ohm SPEAKER removeCELESTION T3054 WOOFER 12'' G12-65 HERITAGE 15OHM FOR GUITAR AMP 65W 97dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeCELESTION T5472 WOOFER 12'' ALNICO GOLD 15OHM FOR GUITAR AMP 50W 100dB remove
NameEMINENCE EB12B Beta-12 12'' 250 W 16 Ohm SPEAKER removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeEMINENCE EB12A Beta-12 12'' 250 W 8 Ohm SPEAKER removeCELESTION T3054 WOOFER 12'' G12-65 HERITAGE 15OHM FOR GUITAR AMP 65W 97dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeCELESTION T5472 WOOFER 12'' ALNICO GOLD 15OHM FOR GUITAR AMP 50W 100dB remove
Image
SKUEB12B12-PZ32EB12AT3054ED12AT5472
Rating
Price 87.04 incl. GR VAT 156.00 incl. GR VAT 136.50 incl. GR VAT 173.59 incl. GR VAT 147.55 incl. GR VAT 301.31 incl. GR VAT
Stock

Out of stock

In stock

Only 2 left in stock (can be backordered)

Available on backorder

Out of stock

Available on backorder

AvailabilityOut of stockIn stockOnly 2 left in stock (can be backordered)Available on backorderOut of stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
Content

BETA- 12A Series Standard American

Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also
works well for PA in a sealed or bandpass enclosure.


SPECIFICATION
  • Nominal Basket Diameter 12“, 304.8 mm
  • Nominal Impedance 16 ohms
  • Power Rating Watts 250 W / Music Program 500 W
  • Resonance 47 Hz
  • Usable Frequency Range 43 Hz - 3.8 kHz
  • Sensitivity 98
  • Magnet Weight 38 oz.
  • Gap Height 0.312“, 7.92 mm
  • Voice Coil Diameter 2“, 50.8 mm

THIELE & Small Parameters
  • Resonant Frequency (fs) 47 Hz
  • DC Resistance (Re) 5.0
  • Coil Inductance (Le) 0.64 mH
  • Mechanical Q (Qms) 6.00
  • Electromagnetic Q (Qes) 0.50
  • Total Q (Qts) 0.46
  • Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 237 cc
  • Mechanical Compliance of Suspension (Cms) 0.29 mm/N
  • BL Product (BL) 10.8 T-M
  • Diaphragm Mass inc. Airload (Mms) 40 grams
  • Efficiency Bandwidth Product (EBP) 94
  • Maximum Linear Excursion (Xmax) 4.4 mm
  • Surface Area of Cone (Sd) 538.9 cm²
  • Maximum Mechanical Limit (Xlim) 11 mm

MOUNTING Information
  • Recommended Enclosure Volume
    Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft.
    Vented 36.8-139 liters/1.3-4.9 cu.ft.
  • Overall Diameter 12.03“, 305.5 mm
  • Baffle Hole Diameter 10.95“, 278.1 mm
  • Front Sealing Gasket standard fitted as standard
  • Rear Sealing Gasket standard fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 11.59“, 294.3 mm
  • Depth 4.57“, 116 mm

MATERIALS of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented and extended core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

BETA- 12A Series Standard American Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also works well for PA in a sealed or bandpass enclosure. SPECIFICATION
  • Nominal Basket Diameter 12", 304.8 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 250 W / Music Program 500 W
  • Resonance 47 Hz
  • Usable Frequency Range 43 Hz - 3.8 kHz
  • Sensitivity 98
  • Magnet Weight 38 oz.
  • Gap Height 0.312", 7.92 mm
  • Voice Coil Diameter 2", 50.8 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 47 Hz
  • DC Resistance (Re) 5.0
  • Coil Inductance (Le) 0.64 mH
  • Mechanical Q (Qms) 6.00
  • Electromagnetic Q (Qes) 0.50
  • Total Q (Qts) 0.46
  • Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 237 cc
  • Mechanical Compliance of Suspension (Cms) 0.29 mm/N
  • BL Product (BL) 10.8 T-M
  • Diaphragm Mass inc. Airload (Mms) 40 grams
  • Efficiency Bandwidth Product (EBP) 94
  • Maximum Linear Excursion (Xmax) 4.4 mm
  • Surface Area of Cone (Sd) 538.9 cm²
  • Maximum Mechanical Limit (Xlim) 11 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft. Vented 36.8-139 liters/1.3-4.9 cu.ft.
  • Overall Diameter 12.03", 305.5 mm
  • Baffle Hole Diameter 10.95", 278.1 mm
  • Front Sealing Gasket standard fitted as standard
  • Rear Sealing Gasket standard fitted as standard
  • Mounting Holes Diameter 0.25", 6.4 mm
  • Mounting Holes B.C.D. 11.59", 294.3 mm
  • Depth 4.57", 116 mm
MATERIALS of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented and extended core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.

With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

 

General specifications
Nominal diameter 12“, 305mm
Power Rating 65W
Nominal impedance 8Ω and 15Ω
Sensitivity 97dB
Chassis type Pressed steel
Voice coil diameter 1.75“, 44.5mm
Voice coil material Rounded copper
Magnet type Ceramic
Magnet weight 35oz, 0.99kg
Frequency range 80-5000Hz
Resonance frequency, Fs 85Hz
DC resistance, Re 6.9Ω & 11.8Ω
Mounting Information
Diameter 12.2“, 309mm
Overall depth 5.0“, 128mm
Magnet structure diameter 5.7“, 145mm
Cut-out diameter 11.1“, 283mm
Mounting slot dimensions 0.31“, 7.9mm Ø
Number of mounting slots 4
Mounting slot PCD 11.7“, 297mm
Unit weight 12.1lb, 5.5kg

 

DELTA-12A Standard American Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures. *Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers. Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more   SPECIFICATION
  • Nominal Basket Diameter 12“, 304.8 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 400 W / Music Program 800 W
  • Resonance 55 Hz
  • Usable Frequency Range 54 Hz - 5 kHz
  • Sensitivity 98.3
  • Magnet Weight 56 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 55 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.74 mH
  • Mechanical Q (Qms) 5.27
  • Electromagnetic Q (Qes) 0.46
  • Total Q (Qts) 0.43
  • Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
  • Peak Diaphragm Displacement Volume 125 cc
  • Mechanical Compliance of Suspension 0.21 mm/N
  • BL Product (BL) 13.5 T-M
  • Diaphragm Mass inc. Airload (Mms) 39 grams
  • Efficiency Bandwidth Product (EBP) 120
  • Maximum Linear Excursion (Xmax) 2.4 mm
  • Surface Area of Cone (Sd) 519.5 cm²
  • Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
  • Overall Diameter 12.03“, 305.5 mm
  • Baffle Hole Diameter 10.95“, 278.1 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 11.59“, 294.3 mm
  • Depth 5.35“, 136 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition felt dust cap

Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.

The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.

General specifications
Nominal diameter 12“, 305mm
Power Rating 50W
Nominal impedance 8Ω and 15Ω
Sensitivity 100dB
Chassis type Pressed steel
Voice coil diameter 1.75“, 44.5mm
Voice coil material Round copper
Magnet type Alnico
Frequency range 75-5000Hz
Resonance frequency, Fs 75Hz
DC resistance, Re 6.4Ω & 11.8Ω
Mounting Information
Diameter 12.2“, 309mm
Overall depth 6.5“, 165mm
Magnet structure diameter 5.0“, 128mm
Cut-out diameter 11.1“, 283mm
Mounting slot dimensions 0.31“, 7.9mm Ø
Number of mounting slots 4
Mounting slot PCD 11.7“, 297mm
Unit weight 9.3lb, 4.2kg

 

Weight3.72 kg2.50 kg4.00 kg5.50 kg4.00 kg4.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.72 kg
Weight 2.50 kg
Weight 4.00 kg
Weight 5.50 kg
Weight 4.00 kg
Weight 4.20 kg