Content | DELTA-12A Standard American
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.
*Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers.
Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 55 Hz
- Usable Frequency Range 54 Hz - 5 kHz
- Sensitivity 98.3
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 55 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.74 mH
- Mechanical Q (Qms) 5.27
- Electromagnetic Q (Qes) 0.46
- Total Q (Qts) 0.43
- Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
- Peak Diaphragm Displacement Volume 125 cc
- Mechanical Compliance of Suspension 0.21 mm/N
- BL Product (BL) 13.5 T-M
- Diaphragm Mass inc. Airload (Mms) 39 grams
- Efficiency Bandwidth Product (EBP) 120
- Maximum Linear Excursion (Xmax) 2.4 mm
- Surface Area of Cone (Sd) 519.5 cm²
- Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 25.5-85 liters/0.9-3 cu.ft.
- Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition felt dust cap
|
- 98 dB sensitivity 1 W / 1 m
- 400 W + 60 W Power Handling
- 3" + 1.5" Copper Clad Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- Optical for compact 2-way Systems
| The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 - 1500 Hz response
96 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
General
|
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
12NW100 |
Product code |
ALT12NW1008 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
12.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
96 dB |
Calculated sensitivity |
93.76 dB |
Nominal power handling |
1000 W |
Bandwidth |
45÷1500 Hz |
Fundamental parameters
|
Sd |
531 cm² |
Mms |
119 gr |
Le |
1.9 mH |
Re |
5.1 ohm |
BL |
28 T.m |
Small signal parameters
|
Fs |
42 Hz |
Qes |
0.21 |
Qms |
3.6 |
Qts |
0.2 |
Vas |
44 L |
Datas
|
Xmax |
±9 mm |
Calculated Xmax |
±10.5 mm |
EBP |
200 Hz |
Zmin |
6.2 ohm |
Fs / Qts |
210 Hz |
Vas * Qts² |
1.76 L |
Efficiency |
1.7 % |
Calculated efficiency |
1.5 % |
Weight |
~8.2 kg |
Recommended load volume |
50 L |
Fréquence d'accord liée à la charge |
50 Hz |
Dimensions
|
Voice coil diameter |
4 inch |
Winding depth |
25 mm |
Gap height |
12 mm |
Outside diameter |
319 mm |
Baffle cutout diameter |
281 mm |
Front thickness |
13 mm |
Depth after front |
124 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Neodymium |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
|
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications Nominal diameter (mm/in) | 305/12 | Power Rating (AES, W rms) | 250 | Nominal impedance (Ω) | 8 | Voice coil diameter (mm/in) | 63.5/2.5 | Magnet type | Ceramic | Magnet weight (kg/oz) | 1.2/42 | Chassis type | Pressed steel | Sensitivity (dB) | 97 | Frequency range (Hz) | 40-4000 | Coil material | Round copper | Former material | Polyimide | Cone material | Kevlar loaded paper | Surround material | Cloth-sealed | Suspension | Single | Xmax (mm/in) | 2.4/0.09 | Gap depth (mm/in) | 8.0/0.31 | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters D (m/in) | 0.26/10.24 | Fs (Hz) | 63 | Mmd (g/oz) | 39.60/1.40 | Mair | | Qms | 6.70 | Qes | 0.54 | Qts | 0.50 | Re (Ω) | 5.13 | Vas (lt/ft3) | 54.5/1.92 | BI (Tm) | 13.20 | Cms (mm/N) | 0.14 | Rms (kg/s) | 2.76 | Le (mH) | | Mounting Information Overall diameter (mm/in) | 309/12.17 | Overall depth (mm/in) | 130/5.12 | Cut-out diameter (mm/in) | 283/11.14 | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | Number of mounting slots | 4 | Mounting slot PCD range (mm/in) | 297/11.69 | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | Single pack weight (kg/lb) | 3/6.6 | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | Multipack (60) weight (kg/lb) | 190/419 |
|
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 50W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
Reviews
There are no reviews yet.