EMINENCE ED15A Delta-15A 15” 400 W 8 Ohm SPEAKER Compatible Replacement YAMAHA BR15 JAY6170-1

No longer available!
19%
Eminence Audio
All products by EMINENCE

€176.71 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: ED15A Category:
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.  Compatible Replacement YAMAHA BR15 JAY6170-1 Product type Loudspeaker Chassis Type PA Nominal Diameter 12 ” Nominal Diameter 304.8 mm Voice Coil 2.5 ” Voice Coil 63.5 mm Overall diameter 305.5 mm Pitch Circle Diameter 294.3 mm Cut- out Measurement 278.1 […]

 

Read more

Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.

 Compatible Replacement YAMAHA BR15 JAY6170-1

Product type
Loudspeaker Chassis

Type
PA

Nominal Diameter
12 ”

Nominal Diameter
304.8 mm

Voice Coil
2.5 ”

Voice Coil
63.5 mm

Overall diameter
305.5 mm

Pitch Circle Diameter
294.3 mm

Cut- out Measurement
278.1 mm

Diameter of fixing holes
6.4 mm

Depth
136 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
400 W

maximum rated load
800 W

Sensitivity (1 W / 1 m)
98.3 dB

Frequency response
54 – 5000 Hz

Voice Coil Material
Aluminum

Magnet
Ferrite

Depth of the magnetic gap
9.53 mm

Thiele & Small Parameter

Fs (Resonance Frequency)
55 Hz

Re (DC resistance)
6.3 Ohm(s)

Qms (mechanical quality)
5.27

Le (inductance of the voice coil)
0.74 mH

Qes (electrical quality)
0.46

Qts (overall quality)
0.43

Vas (equivalent volume)
81.3

Mms (moving mass)
39 g

BL (power factor)
13.5 T/m

Xmax (maximum displacement)
2.4 mm

Cms (elasticity of the suspension)
0.21 mm/N

Sd (membrane area)
519.5 cm²

Weight
5,543 kg

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE ED15A Delta-15A 15” 400 W 8 Ohm SPEAKER Compatible Replacement YAMAHA BR15 JAY6170-1”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE ED15A Delta-15A 15'' 400 W 8 Ohm SPEAKER Compatible Replacement YAMAHA BR15 JAY6170-1 removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE EKP15A Kappa Pro-15 15'' 500 W 8 Ohm SPEAKER - Alu Basket removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeB & C Speakers 15-PZB100 Woofer 15 inch 600WRMS 99dB removeEMINENCE ED15C Delta-15 - 15" Speaker 400 W 4 Ohms remove
NameEMINENCE ED15A Delta-15A 15'' 400 W 8 Ohm SPEAKER Compatible Replacement YAMAHA BR15 JAY6170-1 removeB & C Speakers 15-PK40 Woofer 15 inch 400WRMS 99dB removeEMINENCE EKP15A Kappa Pro-15 15'' 500 W 8 Ohm SPEAKER - Alu Basket removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeB & C Speakers 15-PZB100 Woofer 15 inch 600WRMS 99dB removeEMINENCE ED15C Delta-15 - 15" Speaker 400 W 4 Ohms remove
Image
SKUED15A15-PK40EKP15AED15LFA15-PZB100ED15C
Rating
Price €176.71 incl. GR VAT €280.00 incl. GR VAT€304.06 incl. GR VAT€285.19 incl. GR VAT €330.00 incl. GR VAT €155.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Only 3 left in stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 3 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.

 Compatible Replacement YAMAHA BR15 JAY6170-1

Product type Loudspeaker Chassis
Type PA
Nominal Diameter 12 "
Nominal Diameter 304.8 mm
Voice Coil 2.5 "
Voice Coil 63.5 mm
Overall diameter 305.5 mm
Pitch Circle Diameter 294.3 mm
Cut- out Measurement 278.1 mm
Diameter of fixing holes 6.4 mm
Depth 136 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 400 W
maximum rated load 800 W
Sensitivity (1 W / 1 m) 98.3 dB
Frequency response 54 - 5000 Hz
Voice Coil Material Aluminum
Magnet Ferrite
Depth of the magnetic gap 9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 55 Hz
Re (DC resistance) 6.3 Ohm(s)
Qms (mechanical quality) 5.27
Le (inductance of the voice coil) 0.74 mH
Qes (electrical quality) 0.46
Qts (overall quality) 0.43
Vas (equivalent volume) 81.3
Mms (moving mass) 39 g
BL (power factor) 13.5 T/m
Xmax (maximum displacement) 2.4 mm
Cms (elasticity of the suspension) 0.21 mm/N
Sd (membrane area) 519.5 cm²
Weight 5,543 kg 		High efficiency 15" woofer with a very flat frequency response up to 2 kHz and high power handling (800W). Good LF performance, smooth voice response, and compatibility with compact bass-reflex enclosures, the 15 PK 40 achieves perfect balance in two-way systems. Specifications Nominal Diameter 380 mm (15 in) Nominal Impedance 8 Ω Minumum Impedance 6.2 Ω Power Handling (50 –500 Hz) Nominall 400 W Continuous Program2 800 W Sensitivity (1W/1m)3 99 dB Frequency Range 50-2000 Hz Voice Coil Diameter 76 mm (3 in) Winding Material Copper Former Material Glass Fibre Winding Depth 16 mm (5/8 in) Magnetic Gap Depth 9 mm (11/32 in) Flux Density 1.1 T Thiele & Small Parameters4 Fs 47 Hz Re 5.1 Ω Qes 0.33 Qms 5.1 Qts 0.31 Vas 140 dm3 (4.9 ft3) Sd 855 cm2 (132.5 in2) η0 4.2% X max ± 4 mm X var ± 6 mm Mms 84 g Bl 19.7 T·m Le 2.3 mH Mounting and Shipping Information Overall Diameter 394 mm (15.5 in) Bolt Circle Diameter 374 mm (14.6 in) Baffle Cutout Diameter 355 mm (13.9 in) Depth 162 mm (6.4 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 8.3 kg (18.3 lb) Shipping Weight 9.6 kg (21.1 lb) Shipping Box 450x450x200 mm (17.7x17.7x8 in) 1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. Loudspeaker in free air. 2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average SPL from 200 to 2000Hz. 4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
KAPPA PRO-15A Professional Series Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
  • Nominal Basket Diameter 15“, 381 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 500 W / Music Program 1000 W
  • Resonance 47 Hz
  • Usable Frequency Range 46 Hz - 4 kHz
  • Sensitivity 101
  • Magnet Weight 80 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 47 Hz
  • DC Resistance (Re) 5.23
  • Coil Inductance (Le) 1.01 mH
  • Mechanical Q (Qms) 8.01
  • Electromagnetic Q (Qes) 0.40
  • Total Q (Qts) 0.38
  • Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
  • Peak Diaphragm Displacement Volume 274 cc
  • Mechanical Compliance of Suspension (Cms) 0.16 mm/N
  • BL Product (BL) 16.6 T-M
  • Diaphragm Mass inc. Airload (Mms) 72 grams
  • Efficiency Bandwidth Product (EBP) 118
  • Maximum Linear Excursion (Xmax) 3.2 mm
  • Surface Area of Cone (Sd) 856.3 cm²
  • Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 54-184 liters/1.9-6.5 cu.ft.
  • Overall Diameter 15.32“, 389.1 mm
  • Baffle Hole Diameter 14.0“, 355.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.28“, 7.1 mm
  • Mounting Holes B.C.D. 14.56“, 369.9 mm
  • Depth 6.06“, 154 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Die-cast aluminum basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures. Product type Loudspeaker Chassis
Type PA
Nominal Diameter 15 "
Nominal Diameter 381 mm
Voice Coil 2.5 "
Voice Coil 63.5 mm
Overall diameter 384.8 mm
Pitch Circle Diameter 369.9 mm
Cut- out Measurement 352.3 mm
Diameter of fixing holes 6.4 mm
Depth 160 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 500 W
maximum rated load 1000 W
Sensitivity (1 W / 1 m) 96 dB
Frequency response 42 - 3200 Hz
Voice Coil Material copper
Magnet Ferrite
Depth of the magnetic gap 9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 39 Hz
Re (DC resistance) 6.11 Ohm(s)
Qms (mechanical quality) 6.3
Le (inductance of the voice coil) 1.37 mH
Qes (electrical quality) 0.52
Qts (overall quality) 0.48
Vas (equivalent volume) 241
Mms (moving mass) 75 g
BL (power factor) 14.6 T/m
Xmax (maximum displacement) 4.8 mm
Cms (elasticity of the suspension) 0.23 mm/N
Sd (membrane area) 873 cm²
Weight 6,449 kg
1400 W continuous program power capacity
100 mm (4 in) copper voice coil
40 – 2000 Hz response
97 dB sensitivity
Double silicone spider with optimized compliance
DELTA-15A Series Standard American Recommended for professional audio as a mid-bass or vocal wedge in a sealed enclosure. Also suitable as a mid-bass or woofer in vented enclosures. SPECIFICATION
  • Nominal Basket Diameter 15“, 381 mm
  • Nominal Impedance 4 ohms
  • Power Rating Watts 400 W / Music Program 800 W
  • Resonance 40 Hz
  • Usable Frequency Range 48 Hz - 4 kHz
  • Sensitivity 100
  • Magnet Weight 56 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 40 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.64 mH
  • Mechanical Q (Qms) 8.05
  • Electromagnetic Q (Qes) 0.57
  • Total Q (Qts) 0.53
  • Compliance Equivalent Volume (Vas) 270.7 liters / 9.56 cu.ft
  • Peak Diaphragm Displacement Volume (Vd) 233 cc
  • Mechanical Compliance of Suspension (Cms) 0.26 mm/N
  • BL Product (BL) 13.2 T-M
  • Diaphragm Mass inc. Airload (Mms) 62 grams
  • Efficiency Bandwidth Product (EBP) 70
  • Maximum Linear Excursion (Xmax) 2.7 mm
  • Surface Area of Cone (Sd) 864.6 cm²
  • Maximum Mechanical Limit (Xlim) 11.1 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed 37-42.5 liters/1.3-1.5 cu.ft. Vented 82-161.4 liters/2.9-5.7cu.ft.
  • Overall Diameter 15.15“, 384.8 mm
  • Baffle Hole Diameter 13.77“, 349.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 14.56“, 369.9 mm
  • Depth 6.05“, 154 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
Weight5.00 kg6.00 kg8.80 kg6.50 kg10.00 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 6.00 kg
Weight 8.80 kg
Weight 6.50 kg
Weight 10.00 kg
Weight 4.00 kg

Related products