Content |
LEGEND 10516
Higher power, vintage, seamed cone tonality for guitar. Ideal Vintage alnico Jensen replacement.
Coloration : A very meaty tone, but with sparkle, definition and a smooth top-end
Genre: Blues, Country, Rock
Specification
- Nominal Basket Diameter 10“, 254 mm
- Nominal Impedance 16 ohms
- Power Rating 75 W
- Resonance 96 Hz
- Usable Frequency Range 100 Hz - 5.8 kHz
- Sensitivity 100
- Magnet Weight 16 oz.
- Gap Height 0.25“, 6.35 mm
- Voice Coil Diameter 1.5“, 38.1 mm
Thiele & Small Parameters
Resonant Frequency (fs) 96 Hz- DC Resistance (Re) 10.20
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 13.80
- Electromagnetic Q (Qes) 1.32
- Total Q (Qts) 1.21
- Compliance Equivalent Volume (Vas) 21.8 liters / 0.8 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 0cc
- Mechanical Compliance of Suspension (Cms) 0.13 mm/N
- BL Product (BL) 9.9 T-M
- Diaphragm Mass inc. Airload (Mms) 21 grams
- Efficiency Bandwidth Product (EBP) 73
Maximum Linear Excursion (Xmax) 0.0 mm- Surface Area of Cone (Sd) 344.9 cm²
- Maximum Mechanical Limit (Xlim)
Mounting Information
- Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable - Overall Diameter 10.11“, 256.8 mm
- Baffle Hole Diameter 9.13“, 231.8 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.23“, 5.7 mm
- Mounting Holes B.C.D. 9.6“, 243.8 mm
- Depth 4.1“, 104 mm
Materials of Construction
- Coil Construktion Copper voice coil
- Coil Former Polyimide former
- Magnet Composition Ferrite magnet
- Core Details Non-vented core
- Basket Materials Pressed steel basket
- Cone Composition Paper Cone
- Cone Edge Composition Paper cone edge
- Dustcap Composition Solid composition felt dust cap
|
Nominal Specifications
Nominal Diameter 10“, 250 mm
Overall Diameter 10.28“, 261 mm
Bolt Circle Diameter 9.69“, 246 mm
Baffle Cutout Diameter 9.06“, 230 mm
Depth 5.56“, 141.3 mm
Flange and Gasket Thickness 0.49“, 12.5 mm
Electrical Specifications
Minimum Impedance 7.3 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 700 W
Maximum Power Handling**** 1,400 W
Sensitivity (1W/1m) 96 dB
Frequency Range 60 - 4000 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Aluminium
Former Material Glass Fiber
Winding Depth 0.87“, 22 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.3 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 60 Hz
DC Resistance (Re) 5.5 Ohm
BL Product (BL) 25.7 N/A
Diaphragm Mass inc. Airload (Mms) 72.5 grams
Mechanical Compliance of Suspension (Cms) 0.096 mm/N
Rms 4.58 Kg/s
Electromagnetic Q (Qes) 0.22
Mechanical Q (Qms) 6.01
Total Q (Qts) 0.23
Compliance Equivalent Volume (Vas) 0.55 ft³, 15.65 dm³
Surface Area of Cone (Sd) 52.5“², 339 cm²
Maximum Linear Excursion (Xmax)* 9 mm
Xdamage** 12.5 mm
Coil Inductance (Le) 0.85 mH
Diaphragm mass (Mmd) 69 g
Eta Zero 1.46 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
| |
Eminence Basslite CA2010 10" 150W 8 Ohm
Recommended for bass guitar. Excellent in either sealed or vented enclosures. Nice, tight, top end.
SPECIFICATION - Nominal Basket Diameter 10“, 254mm
- Nominal Impedance* 8 ohms
- Power Rating** Watts 150W Music Program 300W
- Resonance 51Hz
- Usable Frequency Range*** 48Hz-7kHz
- Sensitivity 93.5
- Magnet Weight 4 oz.
- Gap Height 0.28“, 7.2mm
- Voice Coil Diameter 2“, 50.8mm
THIELE & Small Parameters - Resonant Frequency (fs) 51Hz
- DC Resistance (Re) 5.46
- Coil Inductance (Le) 0.55mH
- Mechanical Q (Qms) 17.5
- Electromagnetic Q (Qes) 0.52
- Total Q (Qts) 0.51
- Compliance Equivalent Volume (Vas) 49 liters / 1.7 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 126cc
- Mechanical Compliance of Suspension (Cms) 0.27mm/N
- BL Product (BL) 11.2 T-M
- Diaphragm Mass inc. Airload (Mms) 37 grams
- Efficiency Bandwidth Product (EBP) 98
- Maximum Linear Excursion (Xmax) 3.5mm
- Surface Area of Cone (Sd) 360.7 cm2
- Maximum Mechanical Limit (Xlim) 7.0mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 17-23 liters/ 0.6-0.8 cu.ft.
Vented 23-54 liters/ 0.8-1.9 cu.ft. - Overall Diameter 10.25“, 260.4mm
- Baffle Hole Diameter 9.13“, 231.9mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.0mm
- Mounting Holes B.C.D. 9.73“, 247.1mm
- Depth 4.75“, 121mm
- Net Weight 3.6 lbs.,1.6 kg
- Shipping Weight 4.7 lbs., 2.1 kg
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Neodymium magnet
- Non-vented core
- Die-cast aluminum basket
- Aluminum Alloy Cone
- Cloth cone edge
- Solid composition felt dust cap
| 400 W continuous program power capacity
64 mm (2.5 in) aluminium voice coil
60 - 4000 Hz response
98.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
- Category of diameter 10 inch / 25 cm
- Magnet type Neodymium
- Shape Cylindrical
- External diametre 261 mm
- Mounting diametre 230 mm
- Basket front tickness 12.5 mm
- Depth 109.5 mm
- Znom 8 ohm
- Brand B&C Speakers
- Type Cone driver
- Impedance 8 ohm
- Voice coil diameter 2.5“
- Sensitivity 98.5dB
- Nominal power handling 200W
- Max power handling 400W
- Fs 61Hz
- Re 5.4ohm
- Zmin 6.2ohm
- Qts 0.31
- Qms 5
- Qes 0.33
- Vas 32L
- Sd 320cm²
- Xmax 4mm
- Mms 29gr
- Le 0.5mH
- Efficiency 3%
- EBP 185
- Frequency range 60-4000 Hz
- Forme suspension Double roll
- Forme membrane Exponential
- Spider Single
- Fil bobine Aluminium
- Voice coil former Glass fiber
- Winding depth 12 mm
- Magnetic gap depth 8 mm
- Recommended load 26 L (tuned ar 67 Hz)
- Shipping weight 2.65kg
|
Recone kit for FP10FH500 |
Reviews
There are no reviews yet.