EMINENCE EGL121A Legend 1218 – 12″ Speaker 150 W 8 Ohms

High power, British flavored guitar tone. Warm, rich low-end, with smooth mids, and strong highs. Lots of headroom before break-up.

Coloration : Warm, smooth and fat American tone, with a hint of smooth British break-up

Genre : Country, Blues, Jazz

SPECIFICATION

• Nominal Basket Diameter 12“, 304.8 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 150 W / Music Program N/A
• Resonance 100 Hz
• Usable Frequency Range 80 Hz - 4.2 kHz
• Sensitivity 98.8
• Magnet Weight 38 oz.
• Gap Height 0.312“, 7.92 mm
• Voice Coil Diameter 2“, 50.8 mm

• Resonant Frequency (fs) 100 Hz
• DC Resistance (Re) 6.95
• Coil Inductance (Le) 0.69 mH
• Mechanical Q (Qms) 15.51
• Electromagnetic Q (Qes) 0.95
• Total Q (Qts) 0.89
• Compliance Equivalent Volume (Vas) 31.2 liters / 1.1 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 41 cc
• Mechanical Compliance of Suspension (Cms) 0.09 mm/N
• BL Product (BL) 11.6 T-M
• Diaphragm Mass inc. Airload (Mms) 29 grams
• Efficiency Bandwidth Product (EBP) 105
• Maximum Linear Excursion (Xmax) 0.8 mm
• Surface Area of Cone (Sd) 506.7 cm²
• Maximum Mechanical Limit (Xlim) N/A

• Recommended Enclosure Volume
  Sealed N/A
  Vented Acceptable
• Overall Diameter 12.03“, 305.5 mm
• Baffle HoleDiameter 10.95“, 278.1 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.25“, 6.4 mm
• Mounting Holes B.C.D. 11.59“, 294.3 mm
• Depth 4.5“, 114 mm
  

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Non-vented core
• Pressed steel basket
• Paper Cone
• Paper cone edge
• Zurette dust cap

• 98 dB sensitivity 1 W / 1 m
• 500 W + 80 W Power Handling
• 3" Copper Sandwich voice Coil
• Triple Aluminum Demodulating Rings
• Single Point Source providing coherent Wave Front
• Very high SPL, superb Quality Sound
• Optimal for compact 2-way Systems

Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.

The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.

Specification
Nominal Diameter 320 (12) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 7.5 Ohm
Nominal Power Handling (2) 450 W
Continuous Power Handling (3) 900 W
Sensitivity (1W/1m) (4) 95 dB
Frequency Range 40 - 1000 Hz
Voice Coil Diameter 76 (3) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 (0.9) mm (in)
Magnetic Gap Depth 10.5 (0.4) mm (in)
Flux Density 1.15 T

Thiele & Small Parameters
Fs 42 Hz
Re 6.1 Ohm
Qes 0.22
Qms 3.8
Qts 0.2
Vas 75 (2.6) dm3 (ft3)
Sd 522 (80.9) cm2 (in2)
Eta Zero 2.4 %
Xmax +/- 7 mm
Xvar +/- 9 mm
Mms 74 g
Bl 23.5 Txm
Le 2 mH

Mounting and Shipping Info
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 140 mm (5.5 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.4 kg (18.5 lb)
Shipping Box 340x340x170 mm
(13.4x13.4x6.7 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.