EMINENCE EGLBP102C Legend BP102 – 10″ Speaker 200 W 4 Ohms

Recommended for professional bass guitar applications in a sealed or vented enclosure. Works well in single or multidriver designs.

SPECIFICATION

• Nominal Basket Diameter 10“, 254 mm
• Nominal Impedance 4 ohms
• Power Rating Watts 200 W / Music Program 400 W
• Resonance 35 Hz
• Usable Frequency Range 40 Hz - 2 kHz
• Sensitivity 92
• Magnet Weight 38 oz.
• Gap Height 0.312“, 7.92 mm
• Voice Coil Diameter 2“, 50.8 mm

THIELE & Small Parameters

• Resonant Frequency (fs) 35 Hz
• DC Resistance (Re) 5.59
• Coil Inductance (Le) 0.83 mH
• Mechanical Q (Qms) 5.36
• Electromagnetic Q (Qes) 0.47
• Total Q (Qts) 0.43
• Compliance Equivalent Volume (Vas) 91.2 liters / 3.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 207cc
• Mechanical Compliance of Suspension (Cms) 0.54 mm/N
• BL Product (BL) 10.0 T-M
• Diaphragm Mass inc. Airload (Mms) 38 grams
• Efficiency Bandwidth Product (EBP) 75
• Maximum Linear Excursion (Xmax) 6.2 mm
• Surface Area of Cone (Sd) 334.5 cm²
• Maximum Mechanical Limit (Xlim) 10.0 mm

MOUNTING Information

• Recommended Enclosure Volume
  Sealed 14-28 liters/ 0.5-1 cu.ft.
  Vented 25.5-62 liters/ 0.9-2.2 cu.ft.
• Overall Diameter 10.08“, 256.1mm
• Baffle Hole Diameter 9.05“, 229.7mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket as standard
• Mounting Holes Diameter 0.25“, 6.4 mm
• Mounting Holes B.C.D. 9.66“, 245.4 mm
• Depth 4.25“, 108 mm

MATERIALS of Construction

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Non-vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Zurette dust cap

DYNACORD MFT2008  (330 983) 10'' Transducer gives excellent horizontal coverage and extremely low distortion.

Nominal Specifications

    Nominal Diameter 10“, 250 mm
    Overall Diameter 10.28“, 261 mm
    Bolt Circle Diameter 9.69“, 246 mm
    Baffle Cutout Diameter 9.06“, 230 mm
    Depth 5.56“, 141.3 mm
    Flange and Gasket Thickness 0.49“, 12.5 mm


Electrical Specifications

    Minimum Impedance 7.3 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 700 W
    Maximum Power Handling**** 1,400 W
    Sensitivity (1W/1m) 96 dB
    Frequency Range 60 - 4000 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Aluminium
    Former Material Glass Fiber
    Winding Depth 0.87“, 22 mm
    Magnetic Gap Depth 0.47“, 12 mm
    Flux Density 1.3 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 60 Hz
    DC Resistance (Re) 5.5 Ohm
    BL Product (BL) 25.7 N/A
    Diaphragm Mass inc. Airload (Mms) 72.5 grams
    Mechanical Compliance of Suspension (Cms) 0.096 mm/N
    Rms 4.58 Kg/s
    Electromagnetic Q (Qes) 0.22
    Mechanical Q (Qms) 6.01
    Total Q (Qts) 0.23
    Compliance Equivalent Volume (Vas) 0.55 ft³, 15.65 dm³
    Surface Area of Cone (Sd) 52.5“², 339 cm²
    Maximum Linear Excursion (Xmax)* 9 mm
    Xdamage** 12.5 mm
    Coil Inductance (Le) 0.85 mH
    Diaphragm mass (Mmd) 69 g
    Eta Zero 1.46 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

Eminence Basslite CA2010 10" 150W 8 Ohm

Recommended for bass guitar. Excellent in either sealed or vented enclosures. Nice, tight, top end. 

• Nominal Basket Diameter 10“, 254mm
• Nominal Impedance* 8 ohms
• Power Rating** Watts 150W Music Program 300W
• Resonance 51Hz
• Usable Frequency Range*** 48Hz-7kHz
• Sensitivity 93.5
• Magnet Weight 4 oz.
• Gap Height 0.28“, 7.2mm
• Voice Coil Diameter 2“, 50.8mm 

• Resonant Frequency (fs) 51Hz
• DC Resistance (Re) 5.46
• Coil Inductance (Le) 0.55mH
• Mechanical Q (Qms) 17.5
• Electromagnetic Q (Qes) 0.52
• Total Q (Qts) 0.51
• Compliance Equivalent Volume (Vas) 49 liters / 1.7 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 126cc
• Mechanical Compliance of Suspension (Cms) 0.27mm/N
• BL Product (BL) 11.2 T-M
• Diaphragm Mass inc. Airload (Mms) 37 grams
• Efficiency Bandwidth Product (EBP) 98
• Maximum Linear Excursion (Xmax) 3.5mm
• Surface Area of Cone (Sd) 360.7 cm2
• Maximum Mechanical Limit (Xlim) 7.0mm 

• Recommended Enclosure Volume
  Sealed 17-23 liters/ 0.6-0.8 cu.ft.
  Vented 23-54 liters/ 0.8-1.9 cu.ft.
• Overall Diameter 10.25“, 260.4mm
• Baffle Hole Diameter 9.13“, 231.9mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.28“, 7.0mm
• Mounting Holes B.C.D. 9.73“, 247.1mm
• Depth 4.75“, 121mm
• Net Weight 3.6 lbs.,1.6 kg
• Shipping Weight 4.7 lbs., 2.1 kg

• Copper voice coil
• Polyimide former
• Neodymium magnet
• Non-vented core
• Die-cast aluminum basket
• Aluminum Alloy Cone
• Cloth cone edge
• Solid composition felt dust cap

• 3'' sandwich voice coil fiberglass former and aluminium winding
• Progressive wave Konex spider
• Cloth surround with DAR technology
• Cone waterproof treatment
• Ventilated voice coil to reduce power compression
• BMF ferrite magnet
• 95.8 dB sensitivity