Content |
Line Arrays
Recommended for professional audio midrange from 500Hz-3kHz. Basket is closed. Truncated basket for close
spacing in line-arrays.
SPECIFICATION - Nominal Basket Diameter 6.5“, 165 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 150 W / Music Program 300 W
- Resonance 460 Hz
- Usable Frequency Range 500 Hz - 5.4 kHz
- Sensitivity 97.8
- Magnet Weight 38 oz.
- Gap Height 0.31“, 7.92 mm
- Voice Coil Diameter 1.5“, 38.1 mm
THIELE & Small Parameters - Resonant Frequency (fs) 460 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.33 mH
- Mechanical Q (Qms) 3.13
- Electromagnetic Q (Qes) 1.24
- Total Q (Qts) 0.89
- Compliance Equivalent Volume (Vas) 0.4 liters / 0.01 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 2.7 cc
- Mechanical Compliance of Suspension (Cms) 0.01 mm/N
- BL Product (BL) 11.1 T-M
- Diaphragm Mass inc. Airload (Mms) 9 grams
- Efficiency Bandwidth Product (EBP) 371
- Maximum Linear Excursion (Xmax) 0.2 mm
- Surface Area of Cone (Sd) 133.1 cm²
- Maximum Mechanical Limit (Xlim) 0.8 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed N/A
Vented N/A - Overall Diameter 6.59“, 167 mm/Width
- Baffle Hole Diameter 5.65“, 143.5 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket as standard
- Mounting Holes Diameter 0.23“, 5.7 mm
- Mounting Holes B.C.D. 6.06“, 154 mm
- Depth 2.77“, 70 mm
MATERIAL of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket with truncated sides
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
Recone kit for FPW6N8120
|
Nominal Diameter 160 mm (6 in)
Overall Diameter 167.4 mm (6.59 in)
Bolt Circle Diameter 154 mm (6.06 in)
Baffle Cutout Diameter 144 mm (5.67 in)
Depth 77 mm (3 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 2 Kg (4.41 lb)
Shipping Box
(Single Carton Box) 103x190x185 mm (4.06x7.48x7.28 in)
Shipping Weight 2.6 Kg (5.73 lb)
Nominal Impedance 8 Ohm
Minimum Impedance 6.8 Ohm
Nominal Power Handling *** 130 W
Maximum Power Handling **** 260 W
Sensitivity (1W/1m) 95 dB
Frequency Range 85÷6000 Hz
Voice Coil Diameter 37 mm (1.46 in)
Winding Material Al
Former Material Kapton
Winding Depth 12 mm (0.47 in)
Magnetic Gap Depth 8 mm (0.31 in)
Flux Density 1 T
Fs 120 Hz
Re 5.9 Ohm
Qes 0.5
Qms 7.3
Qts 0.47
Vas 3.56 dm^3 (0.13 ft^3)
Sd 118 cm^2 (18.29 in^2)
Xmax * 4.67 mm
Xdamage ** 10.4 mm
Mms 11 g
Bl 8.2 N/A
Le 0.4 mH
Mmd 9.5 g
Cms 0.18 mm/N
Rms 1 Kg/s
Eta Zero 1 %
EBP 240 Hz
| JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003, C5002, C5006
- JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003
- This is a complete brand new JBL, Control 5 woofer
- Voice coil: 1" (25mm)
- Diameter: 6.5" (165mm)
- Impedance: 3.9 ohms
- Treated paper cone with foam edge
- Fits JBL Driver and Cabinet Models
- JBL: Control 5, C-5003, C5002, C 5006, Pro VIII, Pro 8
|
38 mm (1.5 in) copper voice coil |
| 70 - 6000 Hz response |
| 92 dB sensitivity |
| Neodymium magnet allows a very light yet powerful motor assembly |
| Aluminium demodulating ring allows a very low distortion figure |
| 300 W continuous program power capacity |
|
6.5" Neodymium Coaxial Transducer - 93 dB sensitivity 1 W / 1 m
- 130 W + 25 W Power Handling
- 1.5" + 1" Voice Coil
- Single point source providing coherent wave front
- 90° conical dispersion
- Optimal for compact 2-way Systems
|
Reviews
There are no reviews yet.