EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms

51.77 incl. GR VAT

In stock

EAN: 4049521115981
Installments calculation
CompareAdd to wishlist Submit Better Price
1″ high-frequency Driver 35 W 8 Ohms Version 2 SPECIFICATION Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1 ” Voice Coil 25.4 mm Overall diameter 69.9 mm Depth 64.3 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 35 W Sensitivity (horn 1 W / 1 m) 104.7 recommended […]

 

Read more

1″ high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION

Product type

High-frequency Drivers


Nominal Diameter

1 ”


Nominal Diameter

25.4 mm


Voice Coil

1 ”


Voice Coil

25.4 mm


Overall diameter

69.9 mm


Depth

64.3 mm


Nominal Impedance

8 Ohm(s)


Nominal Load Capacity

35 W


Sensitivity (horn 1 W / 1 m)

104.7


recommended crossover frequency

3500 Hz


Voice Coil Carrier

Kapton


Diaphragm material

Phenolic


Magnet

Ferrite


Threaded connector

1 3/8″ 18 UNEF ext.


Weight

0,8 kg

Weight 0.80 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω remove
NameEMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω remove
Image
SKUEAPT50V2DE-16DE-750TNDE-500WG-4002447H
Rating
Price 51.77 incl. GR VAT 99.20 incl. GR VAT 359.00 incl. GR VAT 191.99 incl. GR VAT 243.99 incl. GR VAT 916.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response
Content

1" high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION Product type High-frequency Drivers


Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1 "
Voice Coil 25.4 mm
Overall diameter 69.9 mm
Depth 64.3 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 35 W
Sensitivity (horn 1 W / 1 m) 104.7
recommended crossover frequency 3500 Hz
Voice Coil Carrier Kapton
Diaphragm material Phenolic
Magnet Ferrite
Threaded connector 1 3/8" 18 UNEF ext.
Weight 0,8 kg
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations

Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.11 mH

Datas

Flux density 1.9 T
Zmin 7.8 ohm

Dimensions

Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium
Line Array optimized Waveguide
140° max horizontal coverage
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coilm (3 in) aluminium voice coil
Polyimide diaphragm
1200 – 18000 Hz response
108.5 dB sensitivity
Compact Neodymium magnet assembly

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

Weight0.80 kg1.70 kg5.00 kg5.00 kg1.30 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.80 kg
Weight 1.70 kg
Weight 5.00 kg
Weight 5.00 kg
Weight 1.30 kg
Weight 6.00 kg