EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms

51.77 incl. GR VAT

In stock

EAN: 4049521115981
Installments calculation
CompareAdd to wishlist Submit Better Price
1″ high-frequency Driver 35 W 8 Ohms Version 2 SPECIFICATION Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 1 ” Voice Coil 25.4 mm Overall diameter 69.9 mm Depth 64.3 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 35 W Sensitivity (horn 1 W / 1 m) 104.7 recommended […]

 

Read more

1″ high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION

Product type

High-frequency Drivers


Nominal Diameter

1 ”


Nominal Diameter

25.4 mm


Voice Coil

1 ”


Voice Coil

25.4 mm


Overall diameter

69.9 mm


Depth

64.3 mm


Nominal Impedance

8 Ohm(s)


Nominal Load Capacity

35 W


Sensitivity (horn 1 W / 1 m)

104.7


recommended crossover frequency

3500 Hz


Voice Coil Carrier

Kapton


Diaphragm material

Phenolic


Magnet

Ferrite


Threaded connector

1 3/8″ 18 UNEF ext.


Weight

0,8 kg

Weight 0.80 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EAPT50 VER2 APT50 – 1″ Tweeter 35 W 8 Ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-85TN Driver 2", 110W, 107dB, 0.5-18kHz removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω removeJBL COMPRESSION DRIVER 4' 150W 8Ω remove
NameEMINENCE EAPT50 VER2 APT50 - 1" Tweeter 35 W 8 Ohms removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-85TN Driver 2", 110W, 107dB, 0.5-18kHz removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω removeJBL COMPRESSION DRIVER 4' 150W 8Ω remove
Image
SKUEAPT50V2DE-16DE-85TNDE-852447H2446H
Rating
Price 51.77 incl. GR VAT 99.20 incl. GR VAT 268.00 incl. GR VAT 206.66 incl. GR VAT 916.00 incl. GR VAT 901.03 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

1" high-frequency Driver 35 W 8 Ohms Version 2

SPECIFICATION Product type High-frequency Drivers


Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 1 "
Voice Coil 25.4 mm
Overall diameter 69.9 mm
Depth 64.3 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 35 W
Sensitivity (horn 1 W / 1 m) 104.7
recommended crossover frequency 3500 Hz
Voice Coil Carrier Kapton
Diaphragm material Phenolic
Magnet Ferrite
Threaded connector 1 3/8" 18 UNEF ext.
Weight 0,8 kg
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
220 W continuous program power capacity
2” horn throat diameter
75 mm (3 in) aluminium voice coil
Titanium diaphragm
500 – 18000 Hz response
107 dB sensitivity
Shorting copper cap for extended HF response

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

Weight0.80 kg1.70 kg4.50 kg4.50 kg6.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.80 kg
Weight 1.70 kg
Weight 4.50 kg
Weight 4.50 kg
Weight 6.00 kg
Weight 5.00 kg