EMINENCE EAPT150 APT150 – 1″ High-Frequency Driver 8 Ohms 35 W with Horn Version 2

Discontinued

62.64 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price

1″ high-frequency Driver 8 Ohms 35 W with Horn Version 2.

 

1″ high-frequency Driver 8 Ohms 35 W with Horn Version 2.

 

 

Read more

Product type
High-frequency Drivers
Nominal Diameter
1 “
Nominal Diameter
25.4 mm
Voice Coil
1 “
Voice Coil
25.4 mm
Overall diameter
69.9 mm
Depth
114.3 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
35 W
Sensitivity (horn 1 W / 1 m)
104.7
Frequency response
3500 – 20000 Hz
recommended crossover frequency
3500 Hz
Voice Coil Carrier
Kapton
Diaphragm material
Phenolic
Magnet
Ferrite
Threaded connector
1 3/8″ 18 UNEF ext.
Weight
0,86 kg
Weight 0.80 kg

Reviews

There are no reviews yet.

Be the first to review “EMINENCE EAPT150 APT150 – 1″ High-Frequency Driver 8 Ohms 35 W with Horn Version 2”

Your email address will not be published. Required fields are marked *

Quick Comparison

EMINENCE EAPT150 APT150 - 1" High-Frequency Driver 8 Ohms 35 W with Horn Version 2 removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeWharfedale 0326H tweeter for diamond series removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity remove
NameEMINENCE EAPT150 APT150 - 1" High-Frequency Driver 8 Ohms 35 W with Horn Version 2 removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeWharfedale 0326H tweeter for diamond series removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeB & C Speakers DE-750TN 8Ohm 220W Driver Titanium diaphragm 107.5 dB sensitivity remove
Image
SKUEAPT150V2DE-16DE-450326HDE-500DE-750TN
Rating
Price 62.64 incl. GR VAT 99.20 incl. GR VAT 136.15 incl. GR VAT40.92 incl. GR VAT 191.99 incl. GR VAT 359.00 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Available on backorder

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Available on backorderOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

1" high-frequency Driver 8 Ohms 35 W with Horn Version 2.

 
100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response
Content
Product type
High-frequency Drivers
Nominal Diameter
1 "
Nominal Diameter
25.4 mm
Voice Coil
1 "
Voice Coil
25.4 mm
Overall diameter
69.9 mm
Depth
114.3 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
35 W
Sensitivity (horn 1 W / 1 m)
104.7
Frequency response
3500 - 20000 Hz
recommended crossover frequency
3500 Hz
Voice Coil Carrier
Kapton
Diaphragm material
Phenolic
Magnet
Ferrite
Threaded connector
1 3/8" 18 UNEF ext.
Weight
0,86 kg
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Replacement Spare Part tweeter wharfedale Fits to : Diamond 8.1 Diamond 8.2 Diamond 8.3 Diamond 8.4 Diamond 9.6 Crystal 40 Evo-30 XARUS 1000 XARUS 2000 XARUS 3000 XARUS 3500 XARUS 4000 XARUS 5000 This tweeter also works as a replacement option for the M-Audio BX8A tweeter.100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations

Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.11 mH

Datas

Flux density 1.9 T
Zmin 7.8 ohm

Dimensions

Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium
Driver 2“, 110W, 107.5dB, 0.5-18kHz, Titanium, 6.3kg The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.   Highlights   - 220 watt continuous program power capacity - 3" (75mm)aluminum voice coil - Titanium diaphragm - Copper shorting cap for extended HF response - 107.5 dB sensitivity - 2" (horn throat diameter) bolt-on format (4-bolt) - 500 – 18000 Hz response
Weight0.80 kg1.70 kg2.00 kg0.10 kg5.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.80 kg
Weight 1.70 kg
Weight 2.00 kg
Weight 0.10 kg
Weight 5.00 kg
Weight 5.00 kg