Content | Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
3 "
Voice Coil
76.2 mm
Overall diameter
384.9 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
156 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
450 W
maximum rated load
900 W
Sensitivity (1 W / 1 m)
100.5 dB
Frequency response
52 - 2300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
33 Hz
Re (DC resistance)
5.22 Ohm(s)
Qms (mechanical quality)
8.9
Le (inductance of the voice coil)
1.05 mH
Qes (electrical quality)
0.33
Qts (overall quality)
0.32
Vas (equivalent volume)
321.3
Mms (moving mass)
76 g
BL (power factor)
15.7 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.31 mm/N
Sd (membrane area)
856.3 cm²
Weight
8,422 kg |
Neodymium coaxial speaker with 15" woofer, 8Ω, 400W Nominal, 800W continuous, 99dB (1W/1m) and horn 80W Nominal, 160W continuous, 105dB (1W/1m), response frequency 40-18000Hz, dispersion 80 degrees, 5,6Kg.
800 W continuous program power capacity |
|
80° nominal coverage |
|
40 – 18000 Hz response |
|
99 dB sensitivity |
|
Single Neodymium magnet assembly
Nominal Diameter |
380 mm (15 in) |
Nominal Impedance |
8 ohm |
Minimum Impedance |
6.0 ohm (LF) 8.0 ohm (HF) |
Frequency Range |
40 - 18000 Hz |
Dispersion Angle |
80° |
LF Unit |
|
Sensitivity (1W/1m) |
99 dB |
Nominal Power Handling |
400 W |
Continuous Power Handling |
800 W |
Voice Coil Diameter |
76 mm (3 in) |
Winding Material |
Copper |
HF Unit |
|
Sensitivity (1W/1m) |
105 dB |
Nominal Power Handling |
80 W |
Continuous Power Handling |
160 W |
Voice Coil Diameter |
75 mm (3 in) |
Winding Material |
Aluminium |
Diaphragm Material |
Polyester/Titanium |
Recom. Crossover |
1.2 kHz |
Overall Diameter |
393 mm (15.5 in) |
Bolt Circle Diameter |
374 mm (14.7 in) |
Baffle Cutout Diameter |
353 mm (13.9 in) |
Depth |
198 mm (7.8 in) |
Flange and Gasket Thickness |
16 mm (5/8 in) |
Net Weight |
5.6 kg (12.3 lb) |
Shipping Weight |
7.0 kg (15.4 lb) |
Shipping Box |
450x450x290 mm (17.7x17.7x11.4 in) |
|
| LF B&C Speakers 15-PS76 Subwoofer Speaker 15 inch 1100W, 99dB
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
15PS76 |
Product code |
ALT15PS768 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
15.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
99 dB |
Calculated sensitivity |
96.92 dB |
Nominal power handling |
550 W |
Bandwidth |
40÷2000 Hz |
Fundamental parameters
|
Sd |
855 cm² |
Mms |
106 gr |
Le |
1.3 mH |
Re |
5 ohm |
BL |
22.1 T.m |
Small signal parameters
|
Fs |
38 Hz |
Qes |
0.28 |
Qms |
5.2 |
Qts |
0.26 |
Vas |
164 L |
Datas
|
Xmax |
±7.5 mm |
Calculated Xmax |
±7.6667 mm |
EBP |
136 Hz |
Zmin |
6.3 ohm |
Fs / Qts |
146 Hz |
Vas * Qts² |
11.09 L |
Efficiency |
3.3 % |
Calculated efficiency |
3.09 % |
Weight |
~8.7 kg |
Dimensions
|
Voice coil diameter |
3 inch |
Winding depth |
19 mm |
Gap height |
11 mm |
Outside diameter |
393 mm |
Baffle cutout diameter |
354 mm |
Front thickness |
16 mm |
Depth after front |
155 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Ferrite |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
Surround material |
Cloth |
EAN 8059300642818 |
1000 W continuous program power capacity |
|
76 mm (3 in) copper voice coil |
|
40 – 2000 Hz response |
|
99.5 dB sensitivity |
|
Neodymium magnet allows a very light yet powerful motor assembly |
|
Ventilated voice coil gap for reduced power compression |
| DELTA-15A Series Standard American
Recommended for professional audio as a mid-bass or vocal wedge in a sealed enclosure. Also suitable as a
mid-bass or woofer in vented enclosures.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 40 Hz
- Usable Frequency Range 48 Hz - 4 kHz
- Sensitivity 100
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 40 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 8.05
- Electromagnetic Q (Qes) 0.57
- Total Q (Qts) 0.53
- Compliance Equivalent Volume (Vas) 270.7 liters / 9.56 cu.ft
- Peak Diaphragm Displacement Volume (Vd) 233 cc
- Mechanical Compliance of Suspension (Cms) 0.26 mm/N
- BL Product (BL) 13.2 T-M
- Diaphragm Mass inc. Airload (Mms) 62 grams
- Efficiency Bandwidth Product (EBP) 70
- Maximum Linear Excursion (Xmax) 2.7 mm
- Surface Area of Cone (Sd) 864.6 cm²
- Maximum Mechanical Limit (Xlim) 11.1 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 37-42.5 liters/1.3-1.5 cu.ft.
Vented 82-161.4 liters/2.9-5.7cu.ft.
- Overall Diameter 15.15“, 384.8 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.05“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
Reviews
There are no reviews yet.