| Content | Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
3 "
Voice Coil
76.2 mm
Overall diameter
384.9 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
156 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
450 W
maximum rated load
900 W
Sensitivity (1 W / 1 m)
100.5 dB
Frequency response
52 - 2300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
33 Hz
Re (DC resistance)
5.22 Ohm(s)
Qms (mechanical quality)
8.9
Le (inductance of the voice coil)
1.05 mH
Qes (electrical quality)
0.33
Qts (overall quality)
0.32
Vas (equivalent volume)
321.3
Mms (moving mass)
76 g
BL (power factor)
15.7 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.31 mm/N
Sd (membrane area)
856.3 cm²
Weight
8,422 kg | High efficiency 15" woofer with a very flat frequency
response up to 2 kHz and high power handling (800W). Good
LF performance, smooth voice response, and compatibility
with compact bass-reflex enclosures, the 15 PK 40 achieves
perfect balance in two-way systems.
Specifications
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 Ω
Minumum Impedance 6.2 Ω
Power Handling
(50 –500 Hz)
Nominall 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 50-2000 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 16 mm (5/8 in)
Magnetic Gap Depth 9 mm (11/32 in)
Flux Density 1.1 T
Thiele & Small Parameters4
Fs 47 Hz
Re 5.1 Ω
Qes 0.33
Qms 5.1
Qts 0.31
Vas 140 dm3 (4.9 ft3)
Sd 855 cm2 (132.5 in2)
η0 4.2%
X max ± 4 mm
X var ± 6 mm
Mms 84 g
Bl 19.7 T·m
Le 2.3 mH
Mounting and Shipping Information
Overall Diameter 394 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.6 in)
Baffle Cutout Diameter 355 mm (13.9 in)
Depth 162 mm (6.4 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 8.3 kg (18.3 lb)
Shipping Weight 9.6 kg (21.1 lb)
Shipping Box 450x450x200 mm
(17.7x17.7x8 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test. | Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg |
Neodymium coaxial speaker with 15" woofer, 8Ω,
400W Nominal, 800W continuous, 99dB
(1W/1m) and horn 80W Nominal, 160W
continuous, 105dB (1W/1m), response
frequency 40-18000Hz, dispersion 80 degrees,
5,6Kg.
| 800 W continuous program power capacity |
|
| 80° nominal coverage |
|
| 40 – 18000 Hz response |
|
| 99 dB sensitivity |
|
|
Single Neodymium magnet assembly
| Nominal Diameter |
380 mm (15 in) |
| Nominal Impedance |
8 ohm |
| Minimum Impedance |
6.0 ohm (LF)
8.0 ohm (HF) |
| Frequency Range |
40 - 18000 Hz |
| Dispersion Angle |
80° |
| LF Unit |
|
| Sensitivity (1W/1m) |
99 dB |
| Nominal Power Handling |
400 W |
| Continuous Power Handling |
800 W |
| Voice Coil Diameter |
76 mm (3 in) |
| Winding Material |
Copper |
| HF Unit |
|
| Sensitivity (1W/1m) |
105 dB |
| Nominal Power Handling |
80 W |
| Continuous Power Handling |
160 W |
| Voice Coil Diameter |
75 mm (3 in) |
| Winding Material |
Aluminium |
| Diaphragm Material |
Polyester/Titanium |
| Recom. Crossover |
1.2 kHz |
| Overall Diameter |
393 mm (15.5 in) |
| Bolt Circle Diameter |
374 mm (14.7 in) |
| Baffle Cutout Diameter |
353 mm (13.9 in) |
| Depth |
198 mm (7.8 in) |
| Flange and Gasket Thickness |
16 mm (5/8 in) |
| Net Weight |
5.6 kg (12.3 lb) |
| Shipping Weight |
7.0 kg (15.4 lb) |
| Shipping Box |
450x450x290 mm
(17.7x17.7x11.4 in) |
|
|
KAPPA PRO-15A Professional Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 500 W / Music Program 1000 W
- Resonance 47 Hz
- Usable Frequency Range 46 Hz - 4 kHz
- Sensitivity 101
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.23
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 8.01
- Electromagnetic Q (Qes) 0.40
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
- Peak Diaphragm Displacement Volume 274 cc
- Mechanical Compliance of Suspension (Cms) 0.16 mm/N
- BL Product (BL) 16.6 T-M
- Diaphragm Mass inc. Airload (Mms) 72 grams
- Efficiency Bandwidth Product (EBP) 118
- Maximum Linear Excursion (Xmax) 3.2 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 54-184 liters/1.9-6.5 cu.ft.
- Overall Diameter 15.32“, 389.1 mm
- Baffle Hole Diameter 14.0“, 355.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.1 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.06“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Die-cast aluminum basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
| 1600 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 35 – 1500 Hz response |
|
| 97 dB sensitivity |
|
| FEA optimized Neodymium magnet assembly allows the highest force factor and excursion capability |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
|
Reviews
There are no reviews yet.