| Content |
Recommended for professional audio as a mid/hi or full range in a vented enclosure.
Product type
Loudspeaker Chassis
Type
Mid/Hi-Range , PA
Nominal Diameter
12 "
Nominal Diameter
304.8 mm
Voice Coil
3 "
Voice Coil
76.2 mm
Overall diameter
311.4 mm
Pitch Circle Diameter
297.5 mm
Cut- out Measurement
279.5 mm
Diameter of fixing holes
6.4 mm
Depth
143 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
450 W
maximum rated load
900 W
Sensitivity (1 W / 1 m)
99.3 dB
Frequency response
62 - 4200 Hz
Voice Coil Material
Aluminium
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
45 Hz
Re (DC resistance)
5.41 Ohm(s)
Qms (mechanical quality)
7.76
Le (inductance of the voice coil)
0.77 mH
Qes (electrical quality)
0.28
Qts (overall quality)
0.27
Vas (equivalent volume)
112
Mms (moving mass)
42 g
BL (power factor)
15.2 T/m
Xmax (maximum displacement)
3.2 mm
Cms (elasticity of the suspension)
0.3 mm/N
Sd (membrane area)
519.5 cm²
Weight
7,488 kg
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications | Nominal diameter (mm/in) | 305/12 | | Power Rating (AES, W rms) | 250 | | Nominal impedance (Ω) | 8 | | Voice coil diameter (mm/in) | 63.5/2.5 | | Magnet type | Ceramic | | Magnet weight (kg/oz) | 1.2/42 | | Chassis type | Pressed steel | | Sensitivity (dB) | 97 | | Frequency range (Hz) | 40-4000 | | Coil material | Round copper | | Former material | Polyimide | | Cone material | Kevlar loaded paper | | Surround material | Cloth-sealed | | Suspension | Single | | Xmax (mm/in) | 2.4/0.09 | | Gap depth (mm/in) | 8.0/0.31 | | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters | D (m/in) | 0.26/10.24 | | Fs (Hz) | 63 | | Mmd (g/oz) | 39.60/1.40 | | Mair | | | Qms | 6.70 | | Qes | 0.54 | | Qts | 0.50 | | Re (Ω) | 5.13 | | Vas (lt/ft3) | 54.5/1.92 | | BI (Tm) | 13.20 | | Cms (mm/N) | 0.14 | | Rms (kg/s) | 2.76 | | Le (mH) | | Mounting Information | Overall diameter (mm/in) | 309/12.17 | | Overall depth (mm/in) | 130/5.12 | | Cut-out diameter (mm/in) | 283/11.14 | | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | | Number of mounting slots | 4 | | Mounting slot PCD range (mm/in) | 297/11.69 | | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight | Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | | Single pack weight (kg/lb) | 3/6.6 | | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | | Multipack (60) weight (kg/lb) | 190/419 |
|
| 700 W continuous program power capacity |
|
| 80° nominal coverage |
|
| 55 – 20000 Hz response |
|
| 99 dB sensitivity |
|
| XO-3 dedicated crossover network |
|
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
| DELTA-12A Standard American
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.
*Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers.
Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 55 Hz
- Usable Frequency Range 54 Hz - 5 kHz
- Sensitivity 98.3
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 55 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.74 mH
- Mechanical Q (Qms) 5.27
- Electromagnetic Q (Qes) 0.46
- Total Q (Qts) 0.43
- Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
- Peak Diaphragm Displacement Volume 125 cc
- Mechanical Compliance of Suspension 0.21 mm/N
- BL Product (BL) 13.5 T-M
- Diaphragm Mass inc. Airload (Mms) 39 grams
- Efficiency Bandwidth Product (EBP) 120
- Maximum Linear Excursion (Xmax) 2.4 mm
- Surface Area of Cone (Sd) 519.5 cm²
- Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 25.5-85 liters/0.9-3 cu.ft.
- Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition felt dust cap
|
KAPPA PRO-12A Professional SeriesRecommended for professional audio in a vented mid-bass, and vented bass enclosure incorporating a high-pass filter.
Product type
Loudspeaker Chassis
Nominal Diameter
304.8 mm
Overall diameter
314.5 mm
Pitch Circle Diameter
293.8 mm
Cut- out Measurement
281.1 mm
Diameter of fixing holes
6.5 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
97.1 dB
Frequency response
57 - 2800 Hz
Voice Coil Material
copper
Depth of the magnetic gap
9.53 mm
Fs (Resonance Frequency)
37 Hz
Re (DC resistance)
5.46 Ohm(s)
Qms (mechanical quality)
6.93
Le (inductance of the voice coil)
1.22 mH
Qes (electrical quality)
0.25
Qts (overall quality)
0.24
Vas (equivalent volume)
121
BL (power factor)
17.3 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.32 mm/N
Sd (membrane area)
519.5 cm²
|
Reviews
There are no reviews yet.