| Content |
Expect nothing less than true versatality and pure tube tones in conjuction with modern features for recording and stage purposes. Make your choice and dedicate your amp to your style. Experience all the facettes of sounds at your fingertipps. Itʽs all right there. In the new ENGL Masterclass. Made in Germany!
two channels (Clean and Lead) with separated Gain controls
• built-in digital reverb (switchable)
• Mid-Scoop (switchable)
• 3 Band EQ
• Power Soak for 8 & 16 Ohm cabs (20W, 5W, 1W, Speaker Off)
• Lead Volume Control
• Line-out balanced (frequency compensated)
• FX Loop (switchable)
• Preamp: 2 x ECC83, Poweramp: 2 x EL84
|
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
The Marshall 2061X 20W Amp Head is a hand-wired reissue of the model 2061, a "Lead and Bass" head originally produced from 1967 to 1973. With 20W of power, it churned out golden crunchy tones with depth and character. The Marshall 2061X comes with 2 EL84 tubes in the power amp, 2 ECC83s in the preamp, and a solid state rectifier.
Marshall 2061X Handwired 20W Amp Head Features:
- Hand-wired reissue of the 2061 "Lead and Bass" head
- 20W
- 2 EL84 tubes in the power amp
- 2 ECC83s in the preamp
- Solid state rectifier
| Weighing in at under 1 kilo, the Micro Terror is arguably the most portable amp head on the market. When paired with its matching PPC108 cabinet, the Micro Terrorʼs Aux Input and Headphone output make it a perfect practice partner, small enough for even the most cluttered sideboard. However, donʼt be fooled by its miniature footprint because size is the only thing that is small about this amp.
With a high tensile steel casing, the Micro Terror is built to the same high standards as the rest of the Terror family and features a single 12AX7/ECC81 preamp valve, coupled to a solid state output section. The depth of sound (and volume) that this little thing pushes out is truly staggering, with Orange growl and bite in abundance. Whatʼs more, the Micro Terror can be used with any 8-16 Ohm speaker cabinet. |
Info
NT50H-G2 Features: - Output Power: 50 Watts RMS into 8Ω or 16Ω. - Tube Complement: Preamp: 12AX7 (x3) Power amp: EL34 (x2) - Inputs/Outputs: Guitar input, FX Loop (Send/Return), D.I. Out, Foot switch, 1 x Speaker output (16 Ω), 1 x Speaker output (8 Ω) / 2 x Speaker output (16Ω). - Controls: Master Volume, BRIGHT/GIRTH channel switch, Reverb, Tone Cut, THICK switch, GIRTH channel ? ?Volume, Bass, Middle, Treble, Gain?, BRIGHT channel - ?Bass, Middle, Treble, Gain?, THICK. - Dimensions (W x D x H): 450 x 165 x 215 mm / 17.72 x 6.50 x 8.46 inches. - Weight: 12.2 kg / 26.90 lbs. - Options: VFS2A footswitch. - Accessories: Power cable, High Performance VOX Custom Speaker Cable (16AWG).
|
Marshall 4100 100W Guitar Amplifier
| Marshall 4100
With 4 - 5881 output tubes for 100W of room-shaking power, this head is made for nonstop heavy rockin?.
For total control, the 4100 has 2 channels, each with separate Gain, Master Volume, and Reverb controls. Channel A is voiced for anything from shimmering clean to raw crunch reminiscent of a JTM45. Channel B picks up where normal boost channels quit, generating supercharged distortion and ringing sustain. Other great features include 4-band rotary EQ, adjustable effects loop, and both normal and cab effect direct outs. |
|
Reviews
There are no reviews yet.