| Content |
Installer version of the Mobile 8, for wall or ceiling mount. Rec. amp power (non clipping): up to 300W RMS / 8ohms (electronically high pass filtered 24dB/oct at 200 Hz or higher) Peak SPL: 120dB Impedance: 6 ohms Dimensions: 49,2 x 59,2 x 5,5 cm; frame 1,5 cm thick
8 exciter engine. Frame can be painted in accordance with the interior. Panel is available in several colours or in an easy-to-paint-yourself version. Wall Version | LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT
PRICE WITHOUT V.A.T. 23%
16 X XTMLA Satellites
16 X XTMLAS SUB
4 X XT2600 AMPLIFIER
4 X XT3400 AMPLIFIER
4 X RACK
4 X PANEL POWER DISTRIBUTER
2 Χ FLYING BAR STD-LSA
CABLES CONNECTOR
LINE ARRAY X-TREME AUDIO SECOND HAND 8000 WATT
PRICE WITHOUT V.A.T. 23%
Mini Line Array
The ultra-compact Mini Line Array is a three-way sound system suited to theatres and live performances which offers all the advantages of “linear source” technology thanks to the advanced wave-guide horn loading.
This product line offers four models of loudspeaker systems, with an intentionally large number of applications, ranging from single speakers right through to array systems for open-air locations, all sharing the same basic requirements: mechanical and acoustic compatibility to achieve a precise directivity control. More specifically, both the bi-amplified XTMLA/A module and the active subwoofer XTMLAS/A, are equipped with a digital amplifier based on a high-tech switching technology and fitted with an internal programmable DSP (24 bit /96 kHz) that can be controlled from an external PC thanks to the XT-NET network and its managing software. The different settings of the DSP can be recalled directly by the user with no need for a PC.
The tri-amplifiable passive XTMLA model has a nominal impedance of 16 Ohm and it can be wired in parallel with other 4 loudspeaker systems of the same type to be supplied by a single outer power amplifier. The Mini Line Array system is equipped with a full range of specially designed rigging tools which allow quick and simple deployment in all the intended applications, whether ground supported or flow: the special ESAH suspension system makes setting up an entire line array so easy that it can be accomplished by only one technician. No extra rigging hardware has to be assembled - all necessary equipment is fitted into the cabinet.
The XTMLA element (and the active bi-amplified XTMLA/A one) have been designed for the main purpose of obtaining a wide horizontal and vertical coverage.
This goal has been achieved by a new wave guide for the high section which is capable of producing a 120° coverage on a horizontal plane.
By angling a single wave guide, XTMLA is able to achieve a maximum 15° angle on a vertical plane between each array module. In fact, the corners of the XTMLA's trapezoidal enclosure have been designed to achieve a 2 x 7.5° angle when two loudspeaker systems are coupled.
Thanks to a successful coupling across the audible spectrum, XTMLA generates a coherent wave front on a wide area with very tiny variations in the frequency response and sound pressure level.
The accuracy, the transparency, the great headroom and the flexibility in the approach of the Mini Line Array system to sound reinforcement open up new horizons for the sound system design.
| Mini Line Array |
|
| XTMLA |
|
| System configuration |
3-way mini line array module |
|
| Power handling RMS |
500 W |
|
| Frequency response (-3 dB) |
75÷18.5k Hz |
|
| Peak SPL (@1 m) |
136 dB |
|
| Coverage Angle (-6 dB) |
120° horizontal |
|
| Nominal impedance (bi-amp) |
16 (LF), 16 (MF+HF) Ohm |
|
| Nominal impedance (tri-amp) |
16 (LF), 16 (MF), 16 (HF) Ohm |
|
| Transducers |
LF 1x8" neodymium
MF 1x6“ neodymium
HF 2x1“ titanium |
|
| Input connectors |
2xNL8FC Speakon |
|
| Cabinet |
birch plywood |
|
| Dimensions (WxHxD) |
640x310x410 mm |
|
| Net weight (Kg) |
20.5 |
|
| Mini Line Array |
|
| XTMLAS |
|
| System configuration |
arrayable double subwoofer |
|
| Power handling RMS |
1000 W |
|
| Frequency response (-3 dB) |
40÷150 Hz |
|
| Peak SPL (@1 m) |
134 dB |
|
| Nominal impedance |
8 Ohm |
|
| Transducers |
LF 1x15" neodymium |
|
|
| Cabinet |
birch plywood |
|
|
|
| Dimensions (WxHxD) |
640x390x680 mm |
|
| Net weight (Kg) |
40.5 |
|
Applications
| ♦ |
Concert & touring (small-medium scale) |
| ♦ |
Central clusters, front fill, side fill, delay towers, etc… |
| ♦ |
Open-air events, public squares, etc… (small-medium scale) |
| ♦ |
Portable PA systems for musicians, bands and entertainers (medium size) |
| ♦ |
Theme parks, Circus shows |
| ♦ |
Theatres, Auditoriums, Music halls |
| ♦ |
Places of worship |
| ♦ |
Fixed installations (medium size) |
| ♦ |
Live clubs, Music pubs and other Live Performance Venues (medium-large size) |
| ♦ |
Multi-purpose venues, Recreational and cultural structures, Conference centers and Fairs |
| ♦ |
Corporate A/V events |
| Second Hand good condition Super Tweeter Bullet Celestion HF50, T3421.
-when you place your order, we will send you the picture of the product-
T5500/-R, T5500-R, T-5500/-R, T-5500-R. |
Ervine Ε-Mobile 8-HE series High Energy series 96 dB-2nd Hand-
Super compact lightweight flat loudspeaker panel for mobile applications. Thanks to NXT technology, microphone feedback is reduced to a minimum. For small club applications, monitors are not needed, due to the extreme wide dispersion and the typical DML characteristics. Build in mount for speaker stands. Build in Speakon connector. Specs: Dimensions: 54,2 x 44,2 x 6 cm Weight : only 2,7kg ! Rec. amp power (non clipping): up to 300W RMS / 8ohms (electron. high pass filtered 24dB/oct at 200 Hz or higher) Peak SPL: 120 dB Impedance: 6 ohms
8 excite4r engine |
4 exciter driven wall mount speakerpanel, 150 w Rms, 12 Ohms, 86 dB 1w/1m, 107 dB max spl | SECOND HAND GOOD CONDITION SUBWOOFER 1400 watt 2X15" NET PRICE - VAT EXCLUDE
SpiraTech Series • ARS-215
Dual 15“, High Power
Sub-Woofer
The ARS-215 Sub-Woofer is a double 15" enclosure designed for the reproduction of the sub low frequency spectrum of sound with a very high quality reproduction. Its main purpose is sound reinforcement in set-ups requiring high SPL down to extreme levels with absolute fidelity. Typical applications include live concerts and all types of multi-media events.
Ergonomic handles are provided on the enclosures' side panels for ease of handling. Heavy duty skids protect the cabinet against normal work abrasion.
Heavy duty castors are integrated in the base of the enclosure to permit easy transport on site.
| Main Characteristics |
|
Double-tuned, parallel band-pass design. |
|
Advanced Technology transducers including optimised cooling and all-weather cones. |
|
Precision cabinet construction to achieve light and high resistance cabinets. |
|
Wear-proof, bi-component exterior finish offering ultra-high anti-scratch protection. |
| All these characteristics contribute to obtain the advantages and performance of a true Sub-Woofer, so important in a Line Array rig. Its benefits are positively noticeable in P.A. set-ups as well as in fixed installations. The ARS-215 enclosure enhances the whole system with an extra low-energy input that is so important in today's music material, whatever the style.
The ARS-215 is a rugged enclosure, which mounts two high power 15" transducers in a double-tuned, parallel Band-Pass configuration. With these advanced components the cabinet renders an astounding effectiveness hard to match by any other cabinet of its class and size.
The cabinet is equipped with a protection front steel grille, coated with outdoor resistant compounds. It is fitted with heavy-duty skids permitting stacking in total security.
Integrated, side handles are provided for ease of operation.
The ARS-215 Subs can be stacked in the required proportions under the flown units or in a centrally situated position under the stage level. Its Efficiency and Frequency Range vary and depend on the total number of cabinets used.
The horizontal coverage will be inversely proportional to the product of the length of the array and the concerned frequency. In this case between 20 and 80 Hz. Or put in a different way, the higher the number of cabinets, the better our directivity control and the more specific our pattern behaviour. Thus a medium/large assembly of subs in a Line Array rig is capable of producing large amounts of low-end energy. |
| Applications |
|
Auditoria |
|
Stadia |
|
Concert Halls |
|
Convention Centres |
|
Theatres |
|
Open-air concerts and general events |
|
Large Ballrooms |
| Specifications and Characteristics |
| Frequency Response (Hz) |
±3dB 40Hz - 75Hz |
| Frequency Range (Hz) |
±10dB 31Hz - 90Hz |
| Sensitivity (dB/2,83V@1m) |
101dB |
| SPL Max./Peak (dB SPL@1m.) |
138dB |
| Recommended Signal Processor |
RAM Audio LMS 244 Digital Processor |
| Recommended crossover |
L-R 24dB/Oct - 80Hz |
| Input power rating |
1400W AES
2800W Program
5600W Peak |
| Recommended power amp |
1200W - 2200W RMS 4 Ohm amplifier |
| Constructive Elements |
| Transducers |
2x15" transducers with 4" coil.
1400W AES. (700W AES per unit) |
| Enclosure |
Horizontal parallelepiped construction, 18mm Baltic cross ply, tongue and groove assembly throughout. 35mm front panel and outer frame.
Bi-component epoxy finish |
| Protection Grille |
1.5mm laminated steel with textured epoxy finish |
| Enclosure protections |
Skids on all resting surfaces |
| Handles |
Cut in the enclosure for ease of handling |
| Connectors |
Two Neutrik NL-8 connectors on steel back plate |
| Dimensions (WxDxH) |
1030 x 646 x 436 mm
40.5 x 25.4 x 17.1 inches |
| Net Weight |
65Kg (143 pounds) |
Frequency Response (Hz) : +/- 3dB 40Hz - 75Hz
Frequency Range (Hz) : +/- 10dB 31Hz - 90Hz
Sensitivity (dB / 2,83V@1m.) : 101dB
SPL Max / Peak (dB SPL@1m.): 138dB
Recommended signal processor: RAM Audio LMS 244 Digital Processor
Recommended crossover: L - R 24dB / oct - 80Hz
Input power rating: 1400W AES, 2800W Program, 5600W Peak |
Reviews
There are no reviews yet.