| Content | The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance!
With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB.
Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520! |
Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation. |
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
| Features |
|---|
| 3 Music Source Inputs individually selectable to each output | | One Input Source with Override facility (Jukebox or Auto Announcer) | | 5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones | | Can be expanded interlink of two or more MS520 units | | Inbuilt 20W into 4 Ohms 5 channel Amplifiers (1 Stereo – 3 Mono Option) | | Direct Inputs and Outputs on each zone | | Paging or Alarm Input Override System | | Full Digital Matrix control of functions to all 5 zones | | Up to 10 remote control panels RC 62 can be connected to each MS 520 |
| AMPLIFIER SPECIFICATIONS |
|---|
| Power output: | 5 x 20 | Watt rms | | Frequency Response (Music): | 30 ÷ 45 | Hz ÷ kHz | | Frequency Response (Direct): | 30 ÷ 45 | Hz ÷ kHz | | Frequency Response (Paging): | 200 ÷ 18 | Hz ÷ kHz | | Distortion: | 0.5 | % | | Signal / noise ratio (Music): | -78 | dB | | Signal / noise ratio (Direct): | -78 | dB | | Signal / noise ratio (Paging): | -60 | dB |
| INPUT SECTION |
|---|
| Input sensitivity (Music): | -16 | dBu | | Input sensitivity (Direct): | -16 | dBu | | Input sensitivity (Paging - Line): | - 43 ÷ -27 | dBu | | Input sensitivity (Paging - Mic): | - 58 ÷ -41 | dBu | | Bass Tone: | (100 kHz) ± 8 | dB | | Treble Tone: | (12.5 kHz) ± 8 | dB |
| OUTPUT SECTION |
|---|
| Out level: | -6 / -10 | dB | | Protections: | Short ciurcuit, thermal, AC / DC fuses | | | Power supply: | 16 | V dc |
| POWER REQUIREMENT |
|---|
| Operating voltage: | 220÷240 / 110÷120 V ~ 50 / 60 Hz | V ~ Hz | | Power (consumption): | 370 | W | | Max. Available power: | 100 | W |
| PHISICAL SPECIFICATION |
|---|
| Width: | 438 / 17.24 | mm/inch | | Height: | 44 / 1.73 | mm/inch | | Depth: | 253 / 9.96 | mm/inch | | Net Weight: | 3.66 / 8.06 | Kg/Lbs |
| SHIPPING INFORMATION |
|---|
| Package height: | 75 / 2.95 | mm/inch | | Package width: | 520 / 20.47 | mm/inch | | Package depth: | 280 / 11.02 | mm/inch | | Shipping Weight: | 4.18 / 9.21 | Kg/Lbs |
|
The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands! dbx has a much-heralded history with modular processors dating back to our 900 Series, and the dbx 530 continues that tradition.
The dbx 530\'s overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into ?infinite notch? mode without affecting the operation of others. In situations where a shelving equalizer will produce better results than a peaking one, the 530’s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530\'s ?On? switch.
Load up your 500 Series rack with dbx 530 Parametric EQs and cut your way through mixes like an audio surgeon! |
Product Features:
16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
KLARK TEKNIK AES50
KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners
User's Manual
| WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
Reviews
There are no reviews yet.