DBX 520 DE-ESSER MODULE PROCESSOR

251.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, […]

 

Read more

The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance!

With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB.

Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520!

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “DBX 520 DE-ESSER MODULE PROCESSOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX 520 DE-ESSER MODULE PROCESSOR removeDBX 560A COMPRESSOR/LIMITED MODULE PROCESSOR removeRCF MS 520: 40 W, 7 IN, MULTI-ZONE MUSIC AND PAGING SYSTEM removeBSS Z-BLU102 Signal Processor removeBSS Z-BLU101 Signal Processor removeWORK WDR 24 Wireless digital audio receiver remove
NameDBX 520 DE-ESSER MODULE PROCESSOR removeDBX 560A COMPRESSOR/LIMITED MODULE PROCESSOR removeRCF MS 520: 40 W, 7 IN, MULTI-ZONE MUSIC AND PAGING SYSTEM removeBSS Z-BLU102 Signal Processor removeBSS Z-BLU101 Signal Processor removeWORK WDR 24 Wireless digital audio receiver remove
Image
SKUDBX 520DBX 560AMS520Z-BLU102Z-BLU101WDR 24
Rating
Price 251.00 incl. GR VAT 334.93 incl. GR VAT 1,013.70 incl. GR VAT 3,609.32 incl. GR VAT 3,609.32 incl. GR VAT 94.85 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance! With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB. Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520!

The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.

Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting.

An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.

Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.

Features
3 Music Source Inputs individually selectable to each output
One Input Source with Override facility (Jukebox or Auto Announcer)
5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones
Can be expanded interlink of two or more MS520 units
Inbuilt 20W into 4 Ohms 5 channel Amplifiers (1 Stereo – 3 Mono Option)
Direct Inputs and Outputs on each zone
Paging or Alarm Input Override System
Full Digital Matrix control of functions to all 5 zones
Up to 10 remote control panels RC 62 can be connected to each MS 520
AMPLIFIER SPECIFICATIONS
Power output:5 x 20Watt rms
Frequency Response (Music):30 ÷ 45Hz ÷ kHz
Frequency Response (Direct):30 ÷ 45Hz ÷ kHz
Frequency Response (Paging):200 ÷ 18Hz ÷ kHz
Distortion:0.5%
Signal / noise ratio (Music):-78dB
Signal / noise ratio (Direct):-78dB
Signal / noise ratio (Paging):-60dB
INPUT SECTION
Input sensitivity (Music):-16dBu
Input sensitivity (Direct):-16dBu
Input sensitivity (Paging - Line):- 43 ÷ -27dBu
Input sensitivity (Paging - Mic):- 58 ÷ -41dBu
Bass Tone:(100 kHz) ± 8dB
Treble Tone:(12.5 kHz) ± 8dB
OUTPUT SECTION
Out level:-6 / -10dB
Protections:Short ciurcuit, thermal, AC / DC fuses 
Power supply:16V dc
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 V ~ 50 / 60 HzV ~ Hz
Power (consumption):370W
Max. Available power:100W
PHISICAL SPECIFICATION
Width:438 / 17.24mm/inch
Height:44 / 1.73mm/inch
Depth:253 / 9.96mm/inch
Net Weight:3.66 / 8.06Kg/Lbs
SHIPPING INFORMATION
Package height:75 / 2.95mm/inch
Package width:520 / 20.47mm/inch
Package depth:280 / 11.02mm/inch
Shipping Weight:4.18 / 9.21Kg/Lbs

 

The Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.

The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-102 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 10 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• RJ-11 Telephone Input/Output Port
• Configurable Signal Processing
• 8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system. The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
  • Wireless Digital Audio Receiver System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and unbalanced ¼\'\' jack outputs
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz - 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD
Weight1.00 kg1.00 kg4.18 kg4.10 kg4.10 kg450.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.00 kg
Weight 4.18 kg
Weight 4.10 kg
Weight 4.10 kg
Weight 450.00 kg