Content |
The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.
Eurolite USB-DMX 512 Interface features:
- USB-DMX-Interface
- Interface between notebook or pc and DMX-devices
- Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
- Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
- Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
- Power supply: 5 V DC, 500 mA via USB
- Input: USB 1.1 / USB 2.0
- DMX-output: 512 channels
- DMX-512-connection: 3-pin XLR
| Eurolite DMX Split 6X - 6-way DMX splitter for rackmounting, DMX distributor with one input and six outputs, absolute electric isolation between input and output or between output and output, two types of DMX connectors (3-pin & 5-pin) for each individual channel, every DMX output features an independent driver and data indicator, input and output with a set of respective power supply and 500 mA internal fuse. Power supply: 230V AC~50Hz. Power consumption: 35W. DMX 512-output: 3-pin or 5-pin XLR-connector. Dimensions: 483 x 200 x 50mm (LxWxH). Weight: 3.5kg |
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord |
Power supply: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
Power consumption: |
1 W |
Power connection: |
Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided) |
DMX input: |
2 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Use of brands: |
Built with NEUTRIK connector |
Dimensions: |
Width: 13 cm
Depth: 7 cm
Height: 4,1 cm |
Weight: |
500 g |
|
- DMX out USB Dongle
- 512 channels
- Titan PC Suite for Windows
- 5-pin DMX Female, 1 x USB Type A
- Avolites Titan
- Bus Powered
- 30-01-9601
| ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package list:
2 * DMX Wireless Transmitter/Receiver unit
2 * Power Adapter
1 * Specification ( English ) |
Reviews
There are no reviews yet.