EVENTIDE MIXING LINK HIGH QUALITY MIX PRE

409.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: MIXING LINK Category:
High Quality Mic Pre with FX Loop in a compact form factor -FX Loop Send and Return supports Balanced and Unbalanced signals – interfaces with consoles or guitar pedals easily -Latching or Momentary Footswitch control of FX Loop for performance effects -Works with a wide range of microphones including condenser and ribbon mics with up […]

 

Read more

High Quality Mic Pre with FX Loop in a compact form factor

-FX Loop Send and Return supports Balanced and Unbalanced signals – interfaces with consoles or guitar pedals easily

-Latching or Momentary Footswitch control of FX Loop for performance effects

-Works with a wide range of microphones including condenser and ribbon mics with up to 65dB of clean gain

-Aux I/O connection supporting stereo input and send

-Guitar Amp output and Headphone monitor output with separate master volume control

-International universal power supply included

-Operates on 9V battery
 (No phantom power)

-48V Phantom power for Condenser mics

-Balanced XLR Output which supports DI and Line levels

-Instrument and Balanced Line level inputs

-Versatile Mix Control supports 3 modes- 100% Mic w/FX blended in, or Mic/FX balance control, or 100% FX (no Mic)

 

Analog Input     MAX Input Levels, Input Impedance
INST IN
    +10dBu, 500kΩ
XLR
LINE IN
    +24dBu, 22kΩ
XLR MIC IN
    +4dBu, 2kΩ
FROM FX
    +10dB, 200kΩ
AUX IN
    +4dBu, 5.0kΩ

 

Analog Output     MAX Output Levels, Output Impedance
TO FX
    +10dBu, 400Ω
TO AMP
    +10dBu, 250Ω
PHONES
    150mW per channel, min Load = 8 Ohms
DI/LINE OUT
    (DI) -10dBu, (LINE) +18dBu, 200Ω
AUX OUT
    18mV, 200Ω (mobile mic level)

 

 

Power Supply
9 VDC, 500 ma, center pin (-)
Minimum required current at 9VDC = 200mA

 

Dimensions

English:
3.6” (H) x 2.65” (W) x 1.5” (D)

Metric:
91(H) x 67(W) x 38(D) mm

 

Weight
0.96lb ,0.43kG

  

 

Weight 0.43 kg

Reviews

There are no reviews yet.

Be the first to review “EVENTIDE MIXING LINK HIGH QUALITY MIX PRE”

Your email address will not be published. Required fields are marked *

Quick Comparison

EVENTIDE MIXING LINK HIGH QUALITY MIX PRE removeARX 8-PRE 8CHANNEL MICROPHONE PRE-AMP removeFOCUSRITE ISA 428 MKII FOUR CHANNELS MIC PREAMPLIFIER removePRESONUS TUBE PRE V2 microphone PREAMP removeSOUND DEVICES MM-1 Portable Mic Preamp with Headphone Monitor removeDAP AUDIO D1535 ASC-202 2 Way Stereo Converter remove
NameEVENTIDE MIXING LINK HIGH QUALITY MIX PRE removeARX 8-PRE 8CHANNEL MICROPHONE PRE-AMP removeFOCUSRITE ISA 428 MKII FOUR CHANNELS MIC PREAMPLIFIER removePRESONUS TUBE PRE V2 microphone PREAMP removeSOUND DEVICES MM-1 Portable Mic Preamp with Headphone Monitor removeDAP AUDIO D1535 ASC-202 2 Way Stereo Converter remove
Image
SKUMIXING LINK8-PREISA 428 MKII APA2018-05950MM-1 SDD1535
Rating
Price 409.00 incl. GR VAT 780.00 incl. GR VAT 2,523.00 incl. GR VAT 150.00 incl. GR VAT 695.00 incl. GR VAT 66.95 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Only 3 left in stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stockOnly 3 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

High Quality Mic Pre with FX Loop in a compact form factor

-FX Loop Send and Return supports Balanced and Unbalanced signals - interfaces with consoles or guitar pedals easily

-Latching or Momentary Footswitch control of FX Loop for performance effects

-Works with a wide range of microphones including condenser and ribbon mics with up to 65dB of clean gain

-Aux I/O connection supporting stereo input and send

-Guitar Amp output and Headphone monitor output with separate master volume control

-International universal power supply included

-Operates on 9V battery
 (No phantom power)

-48V Phantom power for Condenser mics

-Balanced XLR Output which supports DI and Line levels

-Instrument and Balanced Line level inputs

-Versatile Mix Control supports 3 modes- 100% Mic w/FX blended in, or Mic/FX balance control, or 100% FX (no Mic)

 

Analog Input     MAX Input Levels, Input Impedance
INST IN
    +10dBu, 500kΩ
XLR
LINE IN
    +24dBu, 22kΩ
XLR MIC IN
    +4dBu, 2kΩ
FROM FX
    +10dB, 200kΩ
AUX IN
    +4dBu, 5.0kΩ

 

Analog Output     MAX Output Levels, Output Impedance
TO FX
    +10dBu, 400Ω
TO AMP
    +10dBu, 250Ω
PHONES
    150mW per channel, min Load = 8 Ohms
DI/LINE OUT
    (DI) -10dBu, (LINE) +18dBu, 200Ω
AUX OUT
    18mV, 200Ω (mobile mic level)

 

 

Power Supply
9 VDC, 500 ma, center pin (-)
Minimum required current at 9VDC = 200mA

 

Dimensions

English:
3.6” (H) x 2.65” (W) x 1.5” (D)

Metric:
91(H) x 67(W) x 38(D) mm

 

Weight
0.96lb ,0.43kG

  

 

Applications

Console input extending for both Digital and Analog mixing
consoles in Studio, Live and Broadcast
Mic Pre-amps for ADAT/ Hard Disk/ Multitrack Recording
 
Innovation
If you love your compact Digital (or Analog) mixing console, but wish it had
more microphone inputs, ARX has the solution ? the 8 Pre: eight channels
of superb sounding Microphone Pre-amps in a compact 1 RU chassis.
The 8 Pre is the ideal console extender for those times when you need more
microphone inputs. Now you can put those unused line inputs to good use,
and who knows - the 8 Pre pre-amps sound so good that you?ll probably end
up using them all the time instead of the ones that came with your mixer!
Superb Audio Quality
The 8 Pre?s ultra low noise figures come from extensive use of premium
components plus care and attention to board design and layout. The result is
superb, transparent audio quality and the headroom to handle anything that a
mic can throw at it.
Gain is adjustable from 20 db through to 60 dB via a trim control on the front
panel, plus we?ve included a ?20dB Pad switch to tame the hottest condenser
mic output if required. The Clip status LED lights up 1 dB before the onset of
clipping, just to warn you you?re getting close.Phantom power is switchable in
banks of four channels: 1 through 4, 5 through 8. A Phase reverse switch is also
provided on each pre-amp channel to eliminate any close miking problems.
In short, the ARX 8 Pre is the mic Pre-amp that you?ll wish the console manufacturer
had used. It provides a unique solution to today?s multiple Mic Pre-amp requirements.

T E C H N I C A L S P E C I F I C A T I O N S
Input Gain 20dB to 60dB
Input Pad ?20dB
Input Impedance 4 KOhm
Input Headroom +23dB
Output Impedance 300 Ohm
Output Level (Max) +23dB
Frequency Response 20Hz ? 20KHz ±0.2 dB
Signal to Noise ratio (Gain set @ 20 dB)
?93dB Unweighted, ?99dB ?A? weighted
Distortion @ Unity Gain .004%, 20 Hz ? 10 KHz
Dynamic Range 116 dB
Phantom Power 48 VDC
Input Connectors Balanced XLR
Output Connectors Balanced TRS jack
Clip Indicator Illuminates 1 dB prior to clipping
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm

Mic Inputs
• Frequency response at minimum gain (0dB): -0.35dB at 20Hz and –3dB at 122kHz
• Frequency response at maximum gain (60dB): –2.5dB at 20Hz and –3dB 103kHz
• Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim
• Maximum headroom: +7.4dBu
• THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter)
• Noise EIN: -126dB (measured at 60dB of gain with 150Ω termination and 20Hz/22kHz bandpass filter)
• Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter)
• SNR: 123dB (relative to max output 25dBu)
• SNR: 120dB (relative to 0dBFS (+22dBu)
• CMRR: 88dB.
• Input Impedance, variable: 600Ω, 1400Ω, 2400Ω, 6800Ω

Line Inputs
• Frequency Response at unity gain (0dB): -0.3dB at 20Hz and –3dB at 94kHz
• Gain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trim
• Maximum headroom: +25.4dBu
• THD+N: 0.002% (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter)
• Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter)
• SNR: 116dB (relative to max output 25dBu)
• SNR: 113dB (relative to 0dBFS +22dBu). Input Impedance: 10kΩ

Instrument Inputs
• Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz
• Frequency Response at +40dB gain: -3dB at 20Hz and –3dB at 38.4kHz
• Gain range: +10dB to +40dB continuously variable
• Maximum headroom: +11.5dBu
• THD+N: 0.006% (measured with –20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter)
• Noise at main output with minimum gain (+10dB): -95dBu (measured with a 20Hz/22kHz bandpass filter)
• Input Impedance = >1MΩ

High Pass Filter
• Roll off = 18dB per octave 3 pole filter
• Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point)

Meters
• 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). The meter calibration points are as follows:

Meter panel calibration value in dBFS / Equivalent dBu value
0dBFS / +22dBu
-2dBFS / +20dBu
-6dBFS / +16dBu
-12dBFS / +10dBu
-18dBFS / +4dBu
-42dBFS / -20dBu



Front and rear connectivity

Analogue Channel Inputs (Inputs 1-4)
• 4 instrument 1⁄4” TS jack inputs on front panel
• 4 microphone XLR inputs on rear panel
• 4 line 1⁄4” TRS jacks on rear panel
• 4 insert return 1⁄4” TRS jacks on rear panel
• 4 ADC XLR inputs on rear panel

Analogue Audio Outputs (Outputs 1-4)
• 4 line XLR outputs on rear panel
• 4 insert send 1⁄4” TRS jacks on rear panel

Other I/O
• IEC power input connector 100Vac – 240Vac

Front Panel Indicators
• 8 output meters, 6 segment
• 4 30-60 mic gain range selection indicator
• 4 +48V phantom power indicator
• 4 Phase indicator
• 4 Insert In indicator
• 4 Filter In indicator
• 4 Input selection indicators (Mic, Line, Inst)
• 4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176.4, 192)
• Ext clock indicators (Lock, Word clock, 256X)

Weight
5.5kg
12.2lbs

Dimensions (W x H x D)
480mm (W) x 88mm (H) x 280mm (D)
19" (W) x 3.5" (H) x 11" (D)


At PreSonus, weʼve been designing preamps for a long time, and we always focus on audio quality first. So when we decided to upgrade our popular TubePre V2, we focused on improving an already high-quality sound—without jacking up the price. Like the originalTubePre, the new version is a fully professional tube preamp, with a dual-servo (no capacitors) gain stage that lets you boost the program signal to smoking hot levels without significantly increasing the background noise. Discrete components and high-voltage operation offer dynamic range and detail not found in other single-channel tube preamps in its class.

Housed in a rugged case, the TubePre V2 rear panel sports separate unbalanced, ¼” instrument and balanced, XLR mic inputs and unbalanced ¼” and balanced XLR line outputs. Weʼve included all of the extras you need for professional operation including a high-pass filter, phantom power for condenser mics, polarity reverse switch, and a backlit VU meter.

Highly versatile and portable, Sound Devices' MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC. The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control. The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.
  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable“
  • Selectable 48-volt / 12-volt phantom power or 12-volt "T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering (plug included)
  • High-strength aluminum chassis with durable belt clip
• Road proof housing • High quality components • Professional balanced XLR outputs • Level control The ASC-202 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls. A possible application of the SC-13 is to use it as a level control in balanced audio lines. The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio solutions are designed to meet the highest stage and audio demands and feature a metal road proof housing with rubber feet and easy accessible controls. The units also have a small footprint which make them ideal to be used and placed in any environment where space is critical. Specifications Frequency Response: 20Hz-20KHz Inputs: XLR/Jack Combo, RCA Outputs: XLR male, RCA Input sensitivity RCA in: -10 dBv Input Impedance RCA in: 10 kOhm Input sensitivity XLR/Jack in: +4 dBu Input Impedance XLR/Jack in: 20 kOhm Output voltage RCA Out: -10 dBV Output Impedance XLR Out: 100 Ohm Output voltage XLR Out: +4 dBu Output Impedance XLR Out: 200 Ohm Power supply: 18V AC (adapter included) Dimensions: 53 x 158 x 135 mm (HxWxD) Weight: 0,65 Kg
Weight0.43 kg2.00 kg5.50 kg2.00 kg3.00 kg0.65 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.43 kg
Weight 2.00 kg
Weight 5.50 kg
Weight 2.00 kg
Weight 3.00 kg
Weight 0.65 kg