Content |
The Second generation of an International Best Seller
Evolving from the FBT EvoMaxX Series of loudspeakers, FBT Evo2MaxX speakers feature totally new Digital Sound Processing resulting in improved sound quality and SPL, especially in bass reproduction at high volume. The sound is more relaxing and natural and the four new DSP presets provide quick dynamic equalization and protection contours for any acoustically challenging venue. Other exciting features are high efficiency and excursion woofers, powerful Class D amplifiers with an extremely low noise floor.
Alongside these key performance improvements, FBT has been inspired to develop the Evo2MaxX Series by one very important goal – offering the customer more value for money. Evo2MaxX lightweight yet sturdy polypropylene cabinets feature a monitor taper designed to ensure that they perform with excellence no matter whether they are used at front of house for a main sound system, as stage floor monitors or within permanent installations.
Additional options are also available for extending low frequency response in the shape of the 15” subwoofer Evo2MaxX 9Sa or the SUBLine 12Sa, 15Sa and 18Sa, all of which boast birch plywood enclosures with 12”, 15” band-pass and 18” reflex designs respectively.
- Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance.
- High efficiency loudspeakers custom made for FBT with a weather resistant coating, allowing use in covered outdoor applications.
- B&C HF compression drivers.
- Latest Class D, 400W LF and 100W HF power amplifiers with high efficiency switch mode power supplies. These amplifiers boast an extremely lightweight design with passively cooled circuitry, meaning no noisy fans!
- New digital signal processor with dynamic equalizations and sophisticated dynamic limiters four improve sound quality and SPL granting reliable and distortion-free audio reproduction
- New 4 DSP presets for improved versatility and ease of use
- Premium sound quality as results of extensive listening test
- High SPL thanks to FBT’s new digital limiter algorithms and high power class D amplifier
- Ergonomic carrying handles, M10 fly points, a top-hat speaker stand socket and a stage monitor taper – all included to ensure superb versatility for live sound events and permanent installations.
Perhaps best of all the fact that Evo2MaxX owners can enjoy four loudspeakers in one thanks to FBT’s New four factory DSP presets. The result of hundreds of hours of development time in FBT’s dedicated R&D facility, the presets optimize the EvoMaxX range to accommodate a vast range of applications.
300 W / 8 ohms 128dB SPL Passive Sound Reinforcement Speaker
- Passive version, recommended amplifier 300W RMS @ 8 ohms
- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors
Code: |
37858 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
55Hz - 18kHz -6dB |
Low Frequency woofer: |
1x12 - 2.5 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
98 dB |
Maximum SPL cont/peak: |
124/128 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.6 KHz |
Recommended HP filter: |
45Hz - 24dboct |
Input connector: |
2x Speakon NL4 in & thru |
Net Dimension (WxHxD): |
407x634x330 - 16x25x13 mm/inch |
Net Weight: |
16.1 / 35.4 kg/lb |
Transport Dimension (WxHxD): |
510x704x410 - 20.1x29.1x16.1 mm/inch |
Transport Weight: |
18.5 / 40.7 kg/lb |
|
Active or Passive Passive Frequency Response -10dB:48-20,000Hz Power Capacity 600W Maximum Sound Pressure Level (SPL) 131dB Nominal Sensitivity 97dB Impedance 8 ohms Crossover 2KHz Low Frequency Driver DVX3121, 12" (305mm) Driver High Frequency Driver ND2, 1" (25.4mm) exit Neodymium Enclosure Material Polypropylene Structural Foam Input Connections Glandnut SJO cable Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) Weight 43.7 lbs (19.8 kg) |
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone low frequency transducer and a 1? throat compression driver with titanium diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing black carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. A 35 mm tripod socket allows for stand mounting. APPLICATIONS: Intended for use in portable sound reinforcement and P.A.
FEATURES: 2-way vented loudspeaker system 1 x 12" speaker 1" compression driver with constant directivity horn 225 W power handling Highly resistant CAB enclosure
SPECIFICATIONS: RMS (Average) Power HandlingR: 225 W Program Power HandlingP: 450 W Peak Power HandlingK: 900 W On-axis Frequency RangeF: 60 Hz - 16 kHz Nominal Impedance: 8 Ω On-axis Sensitivity 1W / 1 mS: 98 dB SPL Rated Peak SPL at Full Power:128 dB Nominal -6 dB BeamwidthsB: 90° Horizontal (average, 500 Hz to 8 kHz) 75° Vertical Speech Coverage AnglesC: 90° Horizontal x 80° Vertical Enclosure Material:Complex Aggregate Board Finish:Blue Gray carpet Connector: 2 paralleled NL4 Speakon, wired Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in Weight: 20.3 kg/ 45 lbs Shipping Weight: 23.5 kg/ 52 lbs |
12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System
- DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
- Freq. Response1 (-3 dB): 58 Hz - 15 kHz
- Freq. Range1 (-10 dB): 48 Hz - 20 kHz
- Rec. Hipass Frequency: 50 Hz
- Axial Sensitivity1: 97 dB (1W/1m)
- Max. Calculated SPL: 131 dB
- Horizontal Coverage: 90
- Vertical Coverage: 50
- Power Handling (Passive): 600W Continuous, 2400W Peak
- LF Power Handling (Biamp): 500W Continuous, 2000W Peak
- HF Power Handling (Biamp): 40W Continuous, 160W Peak
- LF Transducer: DVX3121, 12 in (305mm) Driver
- HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
- Compression Driver
- Crossover Frequency: 2 kHz
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 6.2 Ohms
- Connectors: (2) Neutrik Speakon NL4s
- Enclosure Material: Polypropylene Structural Foam
- Suspension: Enclosure has locations for 4 Single-Stud
- Attachment Plates and 10 Forged Steel
- Eyebolts - 2 on Top, 2 on Bottom, 2 on
- Side, and 1 on Rear of Enclosure
- Grille: Polyester Powder Coated, 16GA
- Galvanized Steel, with Rotatable Logo
- Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
- Net Weight: 19.8 kg (43.7 lbs)
- Shipping Weight: 22.1 kg (48.6 lbs)
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (200 Watts Continuous / 800 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B212 loudspeakers and upgrade them with the same bass and treble/mid transducers found in our wildly popular B212A active version for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B212XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 800 Watts), they are easy to lift by their recessed handles (24 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B212XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach a B212XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because they have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But these loudspeakers don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B212XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you! |
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 200 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
Reviews
There are no reviews yet.