RCF EVOX J8 Active two-way portable array

999.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
General Specs 128 dB Max SPL  1400 Watt 2-way peak power  DSP Processing with FiRPHASE  12″ woofer, high power 2.5″ voice coil  8 x 2″ ultra compact fullrange 1.0″ voice coil  2350x350x450 mm 92.5×13.77×17.71 in (HxWxD)  23,8/52.5 kg/lbs Acoustical Specs FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz MAX SPL @ 1M:128 dB HORIZONTAL COVERAGE ANGLE:120° VERTICAL […]

 

Read more

General Specs

  • 128 dB Max SPL
  •  1400 Watt 2-way peak power
  •  DSP Processing with FiRPHASE
  •  12″ woofer, high power 2.5″ voice coil
  •  8 x 2″ ultra compact fullrange 1.0″ voice coil
  •  2350x350x450 mm 92.5×13.77×17.71 in (HxWxD)
  •  23,8/52.5 kg/lbs

Acoustical Specs

FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz

MAX SPL @ 1M:128 dB
HORIZONTAL COVERAGE ANGLE:120°
VERTICAL COVERAGE ANGLE:30°

Inputs/Outputs
INPUT SIGNAL: bal/unbal 
INPUT CONNECTORS: XRL, Jack
OUTPUT CONNECTORS: XLR
INPUT SENSITIVITY: -2 dBu/+4 dBu

Processor Section

CROSSOVER FREQUENCIES:220 Hz

PROTECTIONS:Thermal, RMS
LIMITER:Soft Limiter
CONTROLS:Volume, Boost, Mic/Line

Cabinet Specs

CABINET/CASE MATERIAL:PP Composite

HANDLES:1 Top
GRILLE:Steel

COLOR:Black

Size/Weight

HEIGHT:623 mm / 24.53 inches

WIDTH:400 mm / 15.75 inches
DEPTH:460 mm / 18.11 inches
WEIGHT:23.8 kg / 52.47 lbs

System Parameters

TOTAL POWER:1400 W Peak, 700 W RMS

HIGH FREQUENCIES:400 W Peak, 200 W RMS
LOW FREQUENCIES:1000 W Peak, 500 W RMS
COOLING:Convection
CONNECTIONS:VDE

Weight 23.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF EVOX J8 Active two-way portable array”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF EVOX J8 Active two-way portable array removeLD Systems MAUI 44 G2 Cardioid Column PA System active 1500W 132dB removeMIPRO MA-808 Portable Wireless PA System removeMiPro MA101C Pack - portable PA inc wired handheld mic and carry case removeRCF EVOX 8 ACTIVE TWO-WAY ARRAY SYSTEM removeBEHRINGER PPA500BT PORTABLE PA SYSTEM COMPACT 500-WATT remove
NameRCF EVOX J8 Active two-way portable array removeLD Systems MAUI 44 G2 Cardioid Column PA System active 1500W 132dB removeMIPRO MA-808 Portable Wireless PA System removeMiPro MA101C Pack - portable PA inc wired handheld mic and carry case removeRCF EVOX 8 ACTIVE TWO-WAY ARRAY SYSTEM removeBEHRINGER PPA500BT PORTABLE PA SYSTEM COMPACT 500-WATT remove
Image
SKUEVOXJ8LDMAUI44G2MIP00151MIP00158EVOX8E006731
Rating
Price 999.00 incl. GR VAT 2,790.00 incl. GR VAT 2,046.00 incl. GR VAT 275.00 incl. GR VAT 1,321.00 incl. GR VAT 612.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

General Specs

  • 128 dB Max SPL
  •  1400 Watt 2-way peak power
  •  DSP Processing with FiRPHASE
  •  12" woofer, high power 2.5" voice coil
  •  8 x 2" ultra compact fullrange 1.0" voice coil
  •  2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)
  •  23,8/52.5 kg/lbs

Acoustical Specs

FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz MAX SPL @ 1M:128 dB HORIZONTAL COVERAGE ANGLE:120° VERTICAL COVERAGE ANGLE:30°

Inputs/Outputs INPUT SIGNAL: bal/unbal 
INPUT CONNECTORS: XRL, Jack
OUTPUT CONNECTORS: XLR
INPUT SENSITIVITY: -2 dBu/+4 dBu

Processor Section CROSSOVER FREQUENCIES:220 Hz PROTECTIONS:Thermal, RMS LIMITER:Soft Limiter CONTROLS:Volume, Boost, Mic/Line

Cabinet Specs CABINET/CASE MATERIAL:PP Composite HANDLES:1 Top GRILLE:Steel

COLOR:Black

Size/Weight HEIGHT:623 mm / 24.53 inches WIDTH:400 mm / 15.75 inches DEPTH:460 mm / 18.11 inches WEIGHT:23.8 kg / 52.47 lbs

System Parameters TOTAL POWER:1400 W Peak, 700 W RMS HIGH FREQUENCIES:400 W Peak, 200 W RMS LOW FREQUENCIES:1000 W Peak, 500 W RMS COOLING:Convection CONNECTIONS:VDE
pdfUser´s Manual pdfTender documents

LD Systems MAUI 44 G2 Cardioid powered Column Loudspeaker

  • Professional column PA system with 1500 W RMS and 132 dB max. SPL
  • Cardioid column for controlled low- and mid-range frequency dispersion and cardioid subwoofer application (with additional subwoofer)
  • TrueWireless™ stereo technology for wireless stereo pairing of two column systems
  • aptX™ coding and advanced audio coding (AAC) for high-resolution Bluetooth® streaming
  • BEM-optimized high-frequency waveguide for uniform dispersion pattern, phase plug for coherent mid-range wavefront and flow-optimised bass-reflex ports
  • DynX® DSP technology for distortion-free sound at maximum volume
  • Automatic setup detection
  • Fast and simple assembly without stands or cables
  • Rugged subwoofer housing made out of polyurea-coated birch plywood and lightweight, powder-coated aluminium column
Column systems have literally revolutionized numerous application areas for bands and DJs. Never has it been easier to provide a consistent sound solution from a simple, inconspicuous PA system - even in large spaces. The MAUI 44 G2 is now the practical, powerful solution for the professional segment. The LD Systems MAUI 44 G2 is the flagship of the MAUI series column PAs: it offers an enormous 1,500 watts of total output (RMS) with a frequency response of 37 Hz to 20 kHz and a sound-level pressure of 132 dB (peak). With its outstanding sound properties and wide-ranging functions, this compact column PA is perfect for rental companies, musicians, small clubs, street festivals and permanent installations. The cardioid properties of the column elements and the possibility of creating a cardioid bass with an additional subwoofer further highlights the professional nature of this sound system. The column achieves a rear attenuation of 18 dB, the subwoofer 15 dB. The MAUI 44 G2 also sets the tone when the two-part column is equipped with twelve 3.5" neodymium full-range speakers and four 1" HF drivers with waveguide. The phase plugs on the six upper drivers improve horizontal directivity, reduce distortion and optimise the sensitivity below the crossover frequency for the tweeters. In addition, the four tweeters feature specially designed and optimised compression drivers coupled to a constant directivity waveguide to provide 120° of coverage across the width and 25° of focused vertical directivity. The curved design of the waveguide transports more energy in the high frequencies to listeners standing further away. In the case of permanent installations or when providing sound for conferences, the TrueWireless™ stereo function makes life a whole lot easier since it enables two systems to be wirelessly connected for stereo reproduction. Bluetooth® streaming in HD quality is no problem at all thanks to aptX™ and AAC Codec, while DynX® DSP technology ensures distortion-free sound reproduction even at the very highest volumes. Total and subwoofer levels can be individually adjusted, providing a perfectly balanced sound in all situations, with a crystal-clear treble, a crisp mid-range and - thanks to the flow-optimised bass-reflex channels - a powerful bass. Another particularly user-friendly feature of the MAUI 44 G2 is automatic set-up recognition: if the column is removed to use the subwoofer as a slave, for example, the display automatically jumps to SLAVE and functions such as Bluetooth and the volume controls for MAIN and SUB no longer appear. The MAUI 44 G2 is absolutely top-class when it comes to transportation and mobile use, too: assembly is quick and simple with no need for cables or stands - special multi-pin connections are used instead. Together, the rugged subwoofer housing made of birch multiplex with polyurea coating and the light, powder-coated aluminium column weigh a total of less than 48 kg - a weight reduction of 20% as compared to the predecessor model. The optionally available transport roller board, carry bag and sub cover do a superb job in day-to-day use. In terms of inputs, the MAUI 44 G2 offers two XLR IN connections, while two XLR outputs enable a wired stereo configuration of two systems. Meanwhile the SUB OUT can be used to hook up an additional subwoofer, and the power supply is via secure and reliable powerCon connection.
Product type
PA Complete Systems

Type
Powerd

Colour
Black

Max. SPL (peak)
132 dB

Frequency response
37 - 20000 Hz

Dispersion (H x V)
120 x 25 °

Total Height
2256 mm

Weight
47,6 kg

Features
Bluetooth Audio Streaming , DSP-based Signal Processing , Excellent Sound Dispersion , Mono/ Stereo Application

Subwoofer


Woofer dimensions
15 "

Woofer size
381 mm

Woofer magnet
Neodymium

Woofer brand
Custom-made

Woofer voice coil
4 "

Woofer voice coil (mm)
101 mm

Cabinet construction
Bass Reflex

Housing material
15 mm Birch Plywood , 18 mm Birch Plywood

Cabinet surface
Polyurea

Dimensions Subwoofer (W x H x D)
434 x 634 x 637 mm

Subwoofer weight
36.4 kg

Mid/Hi System


Midrange size
12 x 3,5 "

Midrange size
12 x 89 mm

Midrange magnet
Neodymium

Midrange brand
Custom-made

Midrange voice coil
1 "

Midrange voice coil
25.4 mm

Tweeter dimensions
4 x 0.5 "

Tweeter dimensions (mm)
12.7 mm

Tweeter magnet
Neodymium

Tweeter brand
Custom-made

Tweeter voice coil
1 "

Tweeter voice coil (mm)
25.4 mm

Wave Guide
CD Waveguide

Loudspeaker inputs
1

Speaker input connections
Custom-made multipin

Cabinet construction mid/high
Closed

Mid/Hi system cabinet material
Aluminum

Mid/Hi system cabinet surface
HD coated aluminum , multi layer mesh (cloth)

Mid/Hi system width
103 mm

Mid/Hi system height
1621 mm

Mid/Hi system depth
135 mm

Mid/Hi system weight
11.2 kg

Amplifier module (integrated in subwoofer)


Amplifier
Class D

System output (RMS):
1500 W

Protection circuits
DC protection , Multiband limiter , short circuit , thermal protection

Cooling
Convection

Controls
Bluetooth HOLD TO LINK button , Bluetooth STEREO LINK button , Cardioid On/Off , Main level , Power On/Off , Sub level

Indicators
Bluetooth , Bluetooth STEREO LINK , Cardioid On/Off , Limit , Power , Protect (protection circuit engaged) , Signal , slave mode , Subwoofer Mode

Mains connector
Neutrik PowerCon

Operating voltage
100 V AC - 120 V AC, 50 - 60 Hz , 220 V AC - 240 V AC, 50-60 Hz

Ambient temperature (operating)
0 - 40 °C

Relative Humidity
< 80% (non-condensing)

Line Inputs
2

Line Input Connectors
XLR female

Line Outputs
2

Line Output Connectors
XLR male

Number of speaker outputs
1

Loudspeaker Output Connectors
Custom-made multipin

Bluetooth Standard
A2DP

Bluetooth Audio Decoder
AAC , aptX , SBC

DSP characteristics


Bit depth AD/DA converter
24 bit

Sampling frequency
48 kHz

Signal-to-noise ratio
106 dB

  • Lightweight Class-D amplifier produces 267-watt audio output.
  • 1.5 " titanium compression driver & 10 " woofer.
  • Industryʼs only master level control enables volume be wirelessly controlled by an optional ACT-32HR transmitter microphone instead of a separate remote.
  • Master volume with "Memory” and "Standard” mode options.  "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level.
  • Up to 4 optional diversity receiver modules with 16 auto-scannable frequencies
  • One-touch Scan & ACT sync button for fast and easy channel set-up.
  • Built-in Bluetooth music player for wireless audio streaming.
  • Retractable handle and sturdy wheels for easy transport.
  • Built-in storage compartment for 2 HH or BP transmitters.
  • A voice priority feature that mutes the music when wireless microphone is used.
  • Built-in AC switching power supply for universal usage and fast battery charge.
  • A smart 4-segment battery meter for accurate battery reading and charging status.
  • Industryʼs only MTM-92 transmitter option for interlinking multiple MA-808 portables wirelessly to extend transmission range & expand coverage.
  • Optional lithium rechargeable battey pack for direct replacement of existing battery. Lithium battery offers superior cycle life, half the weight and environmental.
  • Speakon extension speaker output (use with MA-808EXP).
  • 3 power modes: AC, rechargeable battery and DC jack.
  • Suitable for tripod, floor or desk mount.
  Max. Power Output 267W: 190W (woofer)|77W (tweeter)   
  Amplifier Class D & Class AB  
  Sensitivity  Typical: 96 dB ︱ Maximum: 111 dB  
  T.H.D.  
  Frequency Response 50 Hz~18 kHz  
  Speaker Tweeter: 1.5 " Compression Driver
Woofer: 10 " Neodymium 
 
  Coverage H 60° × V 50°  
  Audio Inputs Wired: XLR × 1 & 6.3 mm (1/4 ") × 1
Wireless: Up to 4 wireless microphones
Audio Player: CDM-2A︱CDM-2︱CDM-2B︱CDM-3A︱DPM-3
Line-In: Unbalanced RCA jack
 
  Bluetooth Connectivity Yes  
  Audio Output Unbalanced Line RCA jack  
  Extension Speaker Speakon output  
  Master Volume Control Manually or Wirelessly via ACT-32HR  
  Controls Tone, Voice priority & Echo on wireless mics  
  Storage 2 handheld or bodypack transmitters  
  Installation Speaker stand, flat surface or retractable handle & wheels  
  Power Supply AC: Built-in 100~240V AC switching power supply (Max. Power Consumption: 352W)
DC & Battery: 24~32 DC, 12V/4.5AH rechargeable gel cell battery or optional MB-80×2
 
  Charge Time Up to 8 hours (automatic charging management)  
  Standby Time Up to 6 hours  
  Battery Indicator 4-level indicator (25/50/75/100%)  
  Color Black  
  Dimensions (W × H × D) 360 × 560 × 350 mm (14.2 × 22 × 13.8 ")   
  Weight (battery included) Approx. 20.5 kg (45 lbs)  
  Wireless System  
  Receiver MRM-70B︱MRM-72B   
  Max. Receiver Up to 4 (MRM-70B×2 + MRM-72B×1)  
  Transmitter ACT-32H / ACT-32HR / ACT-32HC Handheld︱ACT-32T / ACT-32TC Bodypack  
  Microphone MM-107 Wired Dynamic Microphone  
  Interlinking Transmitter MTM-92  
  Installation Plug-in Module  
  Antenna Built-in  
  Digital Audio Player  
  Model CDM-2A︱CDM-2︱CDM-2B︱CDM-3A︱DPM-3   
  Installation Plug-in Module  
  Patents & Approvals Patented. Telecom & safety regulations approved.  
  Notes Refer to actual product in the event of product  description discrepancy. Frequency range and maximum deviation comply with the regulations of different countries.
Details This pack comes complete with a 30w battery powered PA, carry case and a wired MM-107 microphone. An additional line input jack allows an external music or speech source to be used. The unit is small and light enough to be carried - an included shoulder strap aids portability. The MA-101C also has a 5/8" thread insert to fit directly onto the MS-30 tripod stand. The rechargable battery provides up to 8 hours continuous use from a single 4-hour charge. The unit will charge whenever connected to mains power using the supplied PSU. The MIPRO MA-101C 45W Portable PA System with MM-107 Dynamic Wired Microphone and Rechargeable Battery is designed for small-sized live reinforcement applications such as for schools, places of worship, corporate training, paging, trade shows, street performances, fitness instruction, and other comparable situations. This portable 4.8 lb PA system can be hand carried using the built-in handle, by the included adjustable padded shoulder strap, or mounted on a table or microphone stand. It will last on standby up to 10 hours when powered by its built-in lithium rechargeable battery and can recharge in approximately 4 hours. The unit may also be powered by an AC adapter. For sound amplification, the device uses a 45 W class-AB amplifier to power a 5" full range driver. A 3.5 mm input jack allows for connection of an external MP3, iPod, CD player, or other line-level source. A 3.5mm output allows for connection to the input of an external sound device. The PA system features a wired microphone that can be connected using a 1/4" unbalanced microphone input. The system comes with a wired MM-107 hypercardioid dynamic microphone with a 6' cord.
Portable PA System
Speaker Configuration 1 x Full-Range Loudspeaker
Number of Input Channels 2 (1 x Mono, 1 x Stereo)
Amplifier Power Rating 40 W
Amplifier Class Class-AB
Speakers
Enclosure Type Sealed
Full-Range Driver 5" / 12.7 cm
Speaker Sensitivity 95 dB
Signal Processing
Semi-Parametric EQ None
Filters None
Microphone
Form Factor 1 x Handheld
Capsule Dynamic
Polar Pattern Hypercardioid
Outputs 1 x 1/4" TS Unbalanced
Microphone Sensitivity -54 dBV/Pa
Performance
Frequency Response System: 60 Hz to 15 kHz Handheld Microphone: 50 Hz to 16 kHz
I/O Impedance Mic Output: 400 Ohms
THD <1%
Connectivity
Audio I/O 1 x 1/4" TS Mic Input 1 x 1/8" / 3.5 mm TRS Line Input
Power
Battery Type Rechargeable 14.8 V Lithium
Approximate Battery Life 10 Hours (Standby)
Battery Charging Time 4 Hours
Internal Battery Capacity 2.6 Ah
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Physical
Cable Length Handheld Microphone: 6.0' / 1.8 m
Transport Options 1 x Handle (Top)
Mounting 1 x Mic Stand Socket (Bottom) 1 x Shoulder Strap (Top)
Dimensions Handheld Microphone: 2 x 7" / 51 x 178 mm System: 6.3 x 7 x 11.2" / 160 x 178 x 285 mm
Weight Handheld Microphone: 8.3 oz / 235 g Speaker: 4.8 lb / 2.2 kg
 

Evox 8 is a portable compact size sound reinforcement system. Evox 8 combines the quality and reliability of RCF transducers with a very high amplification power. The system features eight 2.0” full range transducers in the line source satellite and a deep sounding 12” woofer in a bass reflex enclosure. The system is designed to be the perfect high output solution for live music and DJs. The unique vocal attitude and SPL make Evox 8 the perfect tool for larger presentations, corporate events and congresses.

General Specs

1400 Watt
128 dB max SPL
40 Hz 20 kHz frequency response
12" Woofer, 2.5" v.c.
8 x 2" Ultra compact fullrange, 1.0 v.c.
120° x 30° slightly tilted pattern control
Innovative DSP processing
Pole mountable, easy set-up and transportation

Sound Specs

Frequency Response -3 dB: 40 Hz ÷ 20 Hz
Max SPL: 128 dB
Horizontal coverage angle: 120°
Vertical coverage angle: 30°
Fullrange: 8 x 2“, 1.0" v.c.
Woofer: 12“, 2.5" v.c.

Inputs/Outputs

Input connectors: Jack-XLR male
Output connectors: XLR female
Input sensitivity: -2 dBu / + 4 dBu

Processor Section

Crossover frequencies: 220 Hz
Protections: thermal, rms
Limiter: Soft limiter
Controls: Volume, EQ, phase, xover

Amplifier Specifications

Total power: 1400 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 1000 W PEAK
Total power: 700 W RMS
High frequencies: 200 W RMS
Low frequencies: 500 W RMS
Cooling: Convection
Connections: VDE connector

Cabinet Specs

Cabinet Material: Baltic birch plywood
Hardware: 2 x M6
Handles: 1 top
Pole Mount/Cap: Yes
Colour: black

Size/Weight

Height: 530/20.86 mm/inch
Width: 346/13.62 mm/inch
Depth: 459/18.10 mm/inch
Net Weight: 23.8/50.70 kg/lbs

Ultra-Compact 500-Watt 6-Channel Portable PA System with Bluetooth Wireless Technology, Wireless Microphone Option, KLARK TEKNIK Multi-FX Processor and FBQ Feedback Detection. Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers. Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth. "Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included).

 

Brand BEHRINGER
Model PPA500BT
Part Number 000-B0N
Input Mic 2
Effect Yes
Channels 4
Console Type Portable PA Systems
Console Layout Horizontal
Power (4 ohms) per channel 160
Equalizer Yes
Application Portable PA
Series PPA series
Warranty 1 Year

 

Weight23.00 kg55.00 kg20.00 kg3.10 kg23.00 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 23.00 kg
Weight 55.00 kg
Weight 20.00 kg
Weight 3.10 kg
Weight 23.00 kg
Weight 15.00 kg