Faital Pro FP18HP1040A Speaker High Performance Series – 18″ 8 Ohm 1000W

Nominal Specifications

    Nominal Diameter 18“, 460 mm
    Overall Diameter 18.11“, 460 mm
    Bolt Circle Diameter 17.32“, 440 mm
    Baffle Cutout Diameter 16.61“, 422 mm
    Depth 7.95“, 202 mm
    Flange and Gasket Thickness 0.55“, 13.9 mm


Electrical Specifications

    Minimum Impedance 6.6 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 1,000 W
    Maximum Power Handling**** 2,000 W
    Sensitivity (1W/1m) 99 dB
    Frequency Range 38 - 2500 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Aluminium
    Former Material Glass Fiber
    Winding Depth 0.9“, 23 mm
    Magnetic Gap Depth 0.47“, 12 mm
    Flux Density 1.3 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 38 Hz
    DC Resistance (Re) 5.5 Ohm
    BL Product (BL) 24.5 N/A
    Diaphragm Mass inc. Airload (Mms) 163 grams
    Mechanical Compliance of Suspension (Cms) 0.11 mm/N
    Rms 4.42 Kg/s
    Electromagnetic Q (Qes) 0.35
    Mechanical Q (Qms) 8.75
    Total Q (Qts) 0.34
    Compliance Equivalent Volume (Vas) 7.37 ft³, 208.8 dm³
    Surface Area of Cone (Sd) 180.7“², 1,166 cm²
    Maximum Linear Excursion (Xmax)* 9.5 mm
    Xdamage** 17.5 mm
    Coil Inductance (Le) 1.36 mH
    Diaphragm mass (Mmd) 141 g
    Eta Zero 3.14 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

• Nominal Basket Diameter 18“, 457 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 500 W / Music Program 1000 W
• Resonance 28 Hz
• Usable Frequency Range 37 Hz - 250 Hz
• Sensitivity 96
• Magnet Weight 67 oz.
• Gap Height 0.38“, 9.53 mm
• Voice Coil Diameter 2.5“, 63.5 mm

• Resonant Frequency (fs) 28 Hz
• DC Resistance (Re) 5.3
• Coil Inductance (Le) 3.43 mH
• Mechanical Q (Qms) 10.38
• Electromagnetic Q (Qes) 0.33
• Total Q (Qts) 0.32
• Compliance Equivalent Volume (Vas) 493.19 liters / 17.41 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 796.00 cc
• Mechanical Compliance of Suspension (Cms) 0.25 mm/N
• BL Product (BL) 18.9 T-M
• Diaphragm Mass inc. Airload (Mms) 128.1 grams
• Efficiency Bandwidth Product (EBP) 84
• Maximum Linear Excursion (Xmax) 6.7 mm
• Surface Area of Cone (Sd) 1188.0 cm²
• Maximum Mechanical Limit (Xlim) 15.0 mm

• Recommended Enclosure Volume Sealed N/A Vented 85-297 liters/3.0-10.5 cu. ft.
• Overall Diameter 18.00“, 457.20 mm
• Baffle Hole Diameter 16.57“, 420.88 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.28“, 7.11 mm
• Mounting Holes B.C.D. 17.25“, 438.15 mm
• Depth 8.13“, 206.50 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Die-cast aluminum basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap

• 95 dB Sensitivity 1 W / 1 m
• 1500 W Power handling
• 4" Copper sandwich voice coil for low power compression
• Neodymium magnet system
• Double treated cone for water protection
• Triple aluminum demodulating rings for ultra low distortion
• Optimal for high output Subwoofers

• 4'' sandwich voice coil fiberglass former
• Double progressive wave Konex spider
• Cloth suround with DAR technology
• Autoclave waterproof cone treatment
• Balanced neodymium magnet circuit
• Cooling radiator and ventilated voice
• coil to reduce power compression
• 98.1 dB sensitivity

Manual/Εγχειρίδιο 

• 1000Wrms continuous power handling (AES Standard)
• Flexirol™ technology for greater excursion control
• Double suspension for exceptional linearity at the highest excursions
• Saturated gap technology for lower harmonic distortion
• Extremely low frequency response, down to 30Hz
• Smart chassis design minimises acoustic distortion