Content |
The DBX ZC FIRE Relay Switch. Dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from a fire safety system.
The DBX ZC FIRE Zone Controller offers extended utility to the DriveRack and ZonePro families. There are nine Zone Controllers, using analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the installer/contractor. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.
The main features of the DBX ZC FIRE include:
- Provides either output muting or programmable scene selection for the dbx ZonePro devices
- Connection to the fire safety system via a relay or directly to the control voltage output
- DIP switches allow identification with connection to the processing device via CAT 5 cable on RJ-45 connectors
- One of nine Zone Controllers options for the DBX ZonePro products
|
| - FAN FOR PA RACK Auto fan operates when the inside temperature of PA RACK goes up. - MANUAL OPERATING When it's manual mode, the fan operates always regardless of temperature. - AUTO OPERATING When it's auto mode, the fan operates at 35°C. | | | | | PF- 602 | Operation Selector Switch | Manual, Auto, Operating temperature | Fan | 2 DC fans | Power Source | 24VDC | Power Consumption | 160mA | Weight | 4Kg/8.8Ib | Dimensions( W x H x D) | 482x 88 x 380 mm / 19 x 3.5 x 15in | ※ Specifications and design subject to change without notice. | | | |
|
The PT-9107SD from Inter-M Americas is a high-quality, single rack space digital AM/FM tuner ideal for use in restaurants, retail, offices, and more. It offers both mono and stereo outputs for compatibility with a variety of sound systems. A front-panel display shows information for channel, band, memory, and tuning. Up to twenty stations may be pre-set so your favorites are never more than a click away.
The tuner has a Digi-Link function for remote control. AC and DC power inputs are provided so that emergency 24VDC power may be connected if needed. The PT-9107SD is a great choice for applications needing a high-quality, easy-to-use rack-mountable tuner.
• Single rack space AM/FM tuner • Stereo and mono outputs • Fixed and variable outputs • Front-panel display screen • Stores up to 20 presets • Digi-Link function for remote control • Auto scan SPECIFICATIONS:
Tuning RangeFM: 87.5 - 108MHz
AM: 522 - 1611kHz SensibilityFM: Less than 3uV
AM: Less than 100uV Signal to Noise RatioFM: Greater than 65dB
AM: Greater than 40dB Total Harmonic Distortion (THD)FM: 0.3%
AM: 1% Output LevelFM Mono Balanced: 1V
FM Stereo Balanced: 500mV
AM Mono Balanced: 240mV Controls1 x Power Switch
1 x Memory Button
1 x Preset Button
1 x Mode Preset/Tune Button
10 x Preset Recall Buttons
1 x Volume Control Knob
1 x Mono/Stereo Button
1 x AM Selector Button
1 x FM Selector Button
1 x Up Button
1 x Down Button
1 x Reset Button (Rear Panel) Connectors1 x AC Power In
1 x DC Power In
1 x Fixed Output Connector
1 x Mono Variable Output Connector
1 x Stereo Variable Output Connector
1 x AM Antenna Connector
1 x FM Antenna Connector
1 x Digi-Link Connector Power Source100/120/230/240VAC, 50/60HZ
24VDC Power Consumption11W Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280 mm) Weight7.7 lbs (3.5 kg)
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
| - AUTOMATIC CHARGING Tapered charging circuitry charges your backup batteries without risk of overcharging. - EASY BATTERY MONITORING Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries. | | | | | PB-607 | Battery Requirement | 24V DC | Starting Current | 3A Max. | Charge Complete Voltage | 27.3V ±10% | Operation Temperature | -10℃~+40℃ | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 130W | Weight(SET) | 7Kg/15.4Ib | Dimension(SET) | 482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in | | | |
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
Reviews
There are no reviews yet.