| Stock | Available on backorder
| Only 5 left in stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock (can be backordered)
|
| Description | | The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles. | Professional productions need a big studio - this guiding principle was considered irrefutable for decades. Today, entire albums are produced in small home studios. Getting the most out of a cramped environment requires compact and well thought-out solutions, like the Gravity® SP 3102 CB studio monitor table stand.
With the SP 3102 CB, you can place your studio monitors directly on your desk without worrying about stability or taking up too much space. Thanks to the continuously height adjustment, the monitoring speakers can be precisely aligned with your sitting position - and the stereo triangle is ready!
The SP 3102 CB is based on a robust steel construction that ensures a secure stand for your studio monitors. The rubberised non-slip feet on the bottom of the table base and the EVA-padded bearing surface for the speaker also contribute to this.
The Gravity® SP 3102 CB is the ideal solution for small tables and storage areas in home studios and is aimed at users who do not want to give up on a stable stand and precise alignment of the monitors even in cramped environments. | The Nowsonic Shock Stop M is a budget solution for optimizing the sound in your studio. The absorbers are designed to eliminate the transfer of vibrations from your studio speakers to the stand surface. They are therefore a simple and effective way to protect against resonance and provide a more linear transmission. The modular design also means different dispersion angles can be achieved. | | |
| Content | The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
| The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
170 mm
Height
40 mm
Depth
300 mm
Weight
0,12 kg |
| Product type |
Stands and Tripods |
| Type |
Speaker Stands |
| Material |
Steel |
| Color |
Black |
| Min. height |
150 mm |
| Max. height |
250 mm |
| Bearing surface |
160 x 180 mm, EVA padded |
| Height adjustment |
Adjusting screw |
| Base material |
Steel |
| Base edge length |
220 x 205 mm |
| Max load |
15 kg |
| Interchangeable rings |
1 x 30 mm |
| Black ring pack included |
Yes |
| Weight |
4,4 kg |
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
- Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
- Maximum load: 25 kg (55.1 lb)
- Material: Steel (pole and plate) and nylon (joint)
- Top plate: Square, sturdy
- Top plate dimensions: 23 x 23 cm (9 x 9“)
- Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
- Quantity: 2 stands
- Weight: 2.75 kg (6 lb) per stand
| Universal speaker stand for loudspeakers till 35 kg, black powder coated.
Triangular foot, 35 mm square section tube, utility space 450 x 390 mmTube Ø 40 / 35 mm, adjustable 91,5 cm - 150 cm, T-screw for locking.
Πλευρά τριγώνου 43cm, ύψος τριγώνου 39cm
For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the safety pin (included in delivery). Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.
The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptable (Ø35mm).
The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height:
915 mm
Max height
1500 mm
Joint material
plastic
Tubing diameter
35 / 40 mm
Max. load
35 kg
Weight
4,4 kg
Additional information
Footprint 230 x 230 mm |
Reviews
There are no reviews yet.