FOCAL ALPHA 50 ACTIVE STUDIO MONITOR 55W

224.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Alpha 50, the most compact of the line, is perfectly adapted for confined spaces. The ALPHA 50 is composed of a 5″ (13cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1″ (25mm) aluminum inverted dome tweeter. It features a 20W amplifier for the tweeter and a […]

 

Read more

Alpha 50, the most compact of the line, is perfectly adapted for confined spaces.

The ALPHA 50 is composed of a 5″ (13cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1″ (25mm) aluminum inverted dome tweeter. It features a 20W amplifier for the tweeter and a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB).

Key points

  • Low directivity: keeps the same sound throughout the room
  • Damping and rigidity: neutrality, no distortion
  • Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
  • Connect up to 2 audio sources
  • Optimal acoustic integration
  • Reduced power consumption
Weight 7.30 kg

Reviews

There are no reviews yet.

Be the first to review “FOCAL ALPHA 50 ACTIVE STUDIO MONITOR 55W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FOCAL ALPHA 50 ACTIVE STUDIO MONITOR 55W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeADAM A8X Active Studio Monitor 150W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM S2X Active Studio Monitor 250W remove
NameFOCAL ALPHA 50 ACTIVE STUDIO MONITOR 55W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeADAM A8X Active Studio Monitor 150W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM S2X Active Studio Monitor 250W remove
Image
SKUALPHA-508130ALSR 6325PA8XE005760S2X
Rating
Price 224.00 incl. GR VAT 725.51 incl. GR VAT 590.00 incl. GR VAT 1,045.00 incl. GR VAT 221.00 incl. GR VAT 1,394.99 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentAlpha 50, the most compact of the line, is perfectly adapted for confined spaces. The ALPHA 50 is composed of a 5" (13cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1" (25mm) aluminum inverted dome tweeter. It features a 20W amplifier for the tweeter and a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB). Key points
  • Low directivity: keeps the same sound throughout the room
  • Damping and rigidity: neutrality, no distortion
  • Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
  • Connect up to 2 audio sources
  • Optimal acoustic integration
  • Reduced power consumption

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

PRICE PER UNIT

 

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

 

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

Weight7.30 kg8.60 kg8.00 kg13.00 kg7.50 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.30 kg
Weight 8.60 kg
Weight 8.00 kg
Weight 13.00 kg
Weight 7.50 kg
Weight 11.00 kg