Content |
The 11" Polyglass® cone woofer used in the CMS SUB is both very light and extremely rigid for a neutral and distortion-free response. This incredible weight-to-rigidity ratio is obtained by applying a thin layer of hollow glass spheres on top of a cellulose-based cone. The high excursion capabilities of the CMS SUB woofer offer tight and controlled bass, able to reproduce even the most minute detail. The CMS SUB woofer was designed to be extremely efficient, to make the most out of amplifier headroom, making sure that you can hear the slightest changes to compression settings.
Specifications Frequency response (+/-3dB) : | 30Hz - 250Hz | Maximum SPL : | 113dB SPL (peak @ 1 m) |
Input :
|
Left, Right, LFE
Electronically balanced / 10kOhms
Female 3 pins XLR
Variable
Output :
Left, Right
Male 3 pins XLR in parallel on inputs
| HF amplifier stage : | 300W rms, BASH® technology |
Electric supply :
|
230V (1.6A fuse rating) or 115V (3.15A fuse rating)
IEC inlet and detachable power cord
|
Adjustment :
|
Sub level (sensitivity) adjustment
Lo-pass frequency adjustment
Phase adjustment
Polarity switch
Mute
External Mute (controlled by external footswitch)
|
Indicators :
|
Power on
Mute
External Mute
| Transducers : | Polyglass, high excursion Focal, 270mm (11“) drive unit | Construction : | 1" (22mm) MDF panels with internal braces |
Finish :
|
Dark grey vinyl
| Dimensions with spikes : | 435.5mm x 366mm x 440mm (17.1" x 14.4“x 17.3“) | Net weight : | 23kg (50.7lb) |
|
Genelec 7060B Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 108 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10" Active | | 120 W | | H x W x D 527 x 462 x 363 mm | | 26 Kg (57 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
Beef up your studio's low-end response
The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.
A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.
JBL LSR 310S Features:
- 200W Class-D Amplifier
- 113dB Peak Output
- 10" Speaker
- Slip Stream Bass Port
- Balanced XLR Input
- Extended Low Frequency Effects
- 3 Selectable Crossover Settings
|
Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7271A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50 - 100 Hz.
| 118 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 2 x 12“ | | 500 W | | H x W x D 755 x 803 x 490 mm | | 82 Kg (180 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Product details
Woofer: | 10-inch black Glass-Composite Cone | Frequency response: | 20Hz - 200Hz | Crossover frequency: | 50Hz - 130Hz adjustable | Amplifier Power: | 300W | S/N Ratio (A weighted): | >95dB | THD + N @ Rated Power: | 0.08% | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | Phase reverse: | 0 / 180° switch | Ground Lift switch: | On / Off | Bypass Footswitch: | On / Off | Available colors: | Red, Black | Net weight: | 17.6kg / 38.7lb | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.
The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.
The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | GLM tone controls | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Reviews
There are no reviews yet.