Content |
- Frequency range (-3 dB): 40 Hz to 35 kHz
- Maximum sound pressure level (music): 110.5 dB SPL (Peak @ 1 m)
- Electronics inputs/impedance type: XLR: Balanced, 10 kΩ
- RCA connectors: Unbalanced, 10 kΩ with input sensitivity compensation
- Amplifier for middle and bass range: 80 W, class AB
- Power amplifier for the height range: 50 W, class AB
- Automatic Standby mode
- Shutdown: After approx. 30 minutes without input signal
- End standby mode: By applied signal > 3 mV
- Power supply voltage: 220 to 240 V (fuse: T2AL/250 V) or 100 to 120 V (fuse T3.15AL/250 V)
- Connections: IEC socket and separate power cable
- High-pass filter: Variable, range 45/60/90 Hz
- Level Bass (0 - 250 Hz): Variable, +/- 6 dB
- Middle/Bass (160 Hz, Q = 1): Variable, +/- 3 dB
- Level Heights (4.5 - 35 kHz): Variable, +/- 3 dB
- Power on/off: Switch On/Off on the rear
- Power consumption in standby mode: 0.5 W
- LED for power On/Off and standby
- Woofer: 2 x 5“(13 cm) Flax Cone woofer
- Tweeter: 1“(25 mm) aluminium/magnesium with M-profile
- Cabinet construction: 15 mm MDF
- Finish: Vinyl, walnut veneer, black lacquer
- Dimensions with four rubber feet (H x W x D): 478 x 211 x 279 mm
- Weight: 11 kg
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
|
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Specifications Frequency response (+/-3dB) : | 55Hz - 28kHz | Maximum SPL : | 107dB SPL (peak @ 1m) |
Input :
|
Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA
| HF amplifier stage : | 50W RMS, class AB | LF amplifier stage : | 80W RMS, class AB |
Electric supply :
|
Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord
|
Adjustment :
|
- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch
|
Indicators :
|
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
| Woofer : | 5" Focal drive unit, Polyglass cone | Tweeter : | Aluminum/Magnesium inverted dome Focal tweeter | Shielding : | Integral by cancellation magnet | Construction : | Reinforced and damped Aluminum cabinet |
Finish :
|
Black powder cabinet
| Dimensions with spikes : | 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“) | Dimensions with table stand : | 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“) | Net weight : | 7.7kg - (17lb) |
|
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
|
Reviews
There are no reviews yet.