A/D converter card for ISA 428.
 
Technical Info:
THD+N: -110 dB (A-weighted) with -4dBfs input signal at .997kHz
Crystal oscillator accuracy: +/- 15 ppm
Clock Jitter 44.1kHz-192kHz:

The Tascam LA-40 MKIII has been primarily designed to provide matching capabilities between professional equipment and semi-professional or consumer equipment. It consists of four RCA inputs and outputs (–10 dBV, unbalanced) as well as four XLR inputs and outputs (+4 dBu/–20 dBu, balanced) which enable the user to connect for instance four tracks of a multitrack recorder (ins and outs) to a balanced mixer ensuring optimum level and impedance matching. Also, a switch matrix allows channels to be linked, utilizing the converter as a distribution amplifier for splitting signals to multiple recorders, or for multizone sound routing applications.

Switches on the bottom panel allow to select a nominal level of +4 dBu or –20 dBu for each channel and ±12 dB trim pots on the front panel make perfect level matching easy. LEDs on the front panel indicate signal presence for each channel. The LA-40 MKIII has also ground lift switches for each channel and a combined master switch to avoid ground loops.
Main Features

    * 4 channels with unbalanced RCA inputs and balanced XLR outputs
    * 4 channels with balanced XLR inputs and unbalanced RCA outputs
    * XLR nominal level selectable between +4 dBu and –20 dBu
    * Trim pots for each channel on front panel (±12 dB)
    * Signal LED for each channel

    * Ground lift switches for each channel and master switch
    * Distribution amplifier functionality: One mono input signal can be routed to all four output channels, or one stereo input signal can be routed to two channels each (RCA to XLR and XLR to RCA)
    * Internal power supply, no AC adapter needed
    * 1 U rack-mountable chassis

Specifications
Inputs and outputs (unbalanced to balanced)
Inputs         4 RCA jacks (unbalanced)
  Input impedance         23 kOhm (when all INPUT LINK switches are OFF)
5.7 kOhm (when all INPUT LINK switches are ON)
  Nominal input level         –10 dBV, ±1 dB
  Maximum input level         +4.8 dBV
  Indicator detection level         –36 dBV or more (OUTPUT LEVEL switch set to +4 dB or –20 dB)
Outputs         4 XLR-type connectors (balanced, Pin 1 = ground, Pin 2 = hot, Pin 3 = cold)
  Output impedance         94 Ohm
  Nominal load impedance         10 kOhm
  Minimum load impedance         600 Ohm
  Nominal output level         +4 dBu, ±1 dB (OUTPUT LEVEL switch set to +4 dB)
–20 dBu, ±1 dB (OUTPUT LEVEL switch set to –20 dB)
  Maximum output level         +23 dBu
Inputs and Outputs (balanced to unbalanced)
Inputs         4 XLR-type connectors (balanced, Pin 1 = ground, Pin 2 = hot, Pin 3 = cold)
  Input impedance         54 kOhm (when all INPUT LINK switches are OFF)
13.5 kOhm (when all INPUT LINK switches are ON)
  Nominal input level         +4 dBu, ±1 dB (INPUT LEVEL switch set to +4 dB)
–20 dBu, ±1 dB (INPUT LEVEL switch set to –20 dB)
  Maximum input level         +30 dBu (INPUT LEVEL switch set to +4 dB)
+8 dBu (INPUT LEVEL switch set to –20 dB)
  Indicator detection level         –22 dBV or more (INPUT LEVEL switch set to +4 dB)
–46 dBV or more (INPUT LEVEL switch set to –20 dB)
Outputs         4 RCA jacks (unbalanced)
  Output impedance         200 Ohm
  Nominal load impedance         10 kOhm
  Minimum load impedance         1 kOhm
  Nominal output level         –10 dBV, ±1 dB
  Maximum output level         +18 dBV
Audio performance
TRIM range         ±12 dB
S/N ratio (at nominal levels)         90 dB(A) (20 kHz LPF)
87 dB(A) (20 Hz HPF and 20 kHz LPF)
Total harmonic distortion
(1 kHz, at nominal levels)         0.005 % or less
Frequency response (at nominal levels)         20 Hz – 100 kHz, ±3 dB
Crosstalk
(1 kHz, nominal levels, 600 Ohm load)         –90 dB
Other specifications
Power requirements         100–240 V AC, 50/60 Hz
Power consumption         6 W
Dimensions (W x H x D)         483 mm x 44 mm x 280 mm
Weight         3 kg

The Apogee AES-8-DIGI-IFC Multi-Channel Digital Cable System is an eight channel AES/EBU* input/output connection designed to interface the Apogee Rosetta 800 to a Digidesign 192's AES/EBU connection via DB-25 multipin connectors on both ends with metal shells for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumb screws are 2.6mm.

DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others.

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

• USB Bus power without using unwanted AC adapter
• Works with up to 24bit/96kHz audio source
• Exclusive PLL power supply is built in to reproduce the stable electrical supply
• High quality analog headphone amp to drive any type of headphones
• Equipped with hgih-grade AKM 32bit(*) DAC AK4390
• Condensers and OP amp designed exclusively for audio products
• USB / Digital (Optical) input selector
• Headphones / RCA (Analog) output selector
• Doubles as D/D converter from USB digital audio to Optical
• An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g