FOCUSRITE REDNET AM2 Stereo DANTE headphone amplifier

815.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a 1/4″ front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR […]

 

Read more

A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a 1/4″ front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.

Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.

RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.

Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “FOCUSRITE REDNET AM2 Stereo DANTE headphone amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

FOCUSRITE REDNET AM2 Stereo DANTE headphone amplifier removePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removePALMER AUDIO MONICON L - Passive Monitor Controller removeSOUND DEVICES HX-3 Portable Headphone Amplifier removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
NameFOCUSRITE REDNET AM2 Stereo DANTE headphone amplifier removePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removePALMER AUDIO MONICON L - Passive Monitor Controller removeSOUND DEVICES HX-3 Portable Headphone Amplifier removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
Image
SKUREDNET AM2PHDA02LH030PMONICONLHX-3E005310
Rating
Price 815.00 incl. GR VAT 353.91 incl. GR VAT 63.24 incl. GR VAT 168.43 incl. GR VAT 491.97 incl. GR VAT 31.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 2 left in stock (can be backordered)

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 2 left in stock (can be backordered)Available on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a 1/4" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.

Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.

RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.

Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 

 

  • Distributes the signal of 1 audio source to 4 sets of headphones
  • 4 channels with separate level controls and headphone outputs
  • All connections via 6.3 mm (1/4“) jacks
  • Operation via supplied power unit

  • All-passive volume control circuit
  • Stereo and AUX inputs
  • Dual outputs
  • Additional mono output
  • Balanced and unbalanced connection
  • Integrated high quality headphone amplifier
  • Mono, mute and PFL switches
  • Stereo volume, AUX and headphone level controls
  • Elegant design with solid wood side panels
  • Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply. Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation. Product type Other Studio and Recording Equipment
Channels 2
Inputs 2
Input connectors 3.5 mm TRS , RCA , XLR
Input type balanced/unbalanced (depending on TS/TRS connection)
Max. input level 20 dBu
Input impedance (balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs 3
Output connectors XLR
Output type balanced/unbalanced (depending on TS/TRS connection)
Max. output level 20 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 40000 Hz
THD 0.001 %
Max. attenuation (Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material sheet steel , wood
Cabinet surface Powder coated
Width 218 mm
Height 77 mm
Depth 100 mm
Weight 1,14 kg

The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.

HX-3 Key Features

Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.

HX-3 Key Features List
  • Three isolated headphone outputs with individual volume controls.
  • 125 dB dynamic range with flat frequency response.
  • Durable 1/4-inch connectors, panel mounted for strength.
  • Stereo or mono monitoring.
  • Peak LED indicates headphone overload.
  • Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
  • Loop Output to connect additional HX-3's in series.
  • All-metal connectors solidly mounted to the chassis for durability and RF immunity.
  • Free from "Pin-1" grounding problems.
  • Internal battery-power for up to 18 hours from two AA alkaline batteries.
  • Chassis-isolated 5 to 18 VDC input for easy external DC powering.
  • Power LED indicates low battery power.
  • High strength, extruded aluminum chassis with protective metal end panels.

 

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
  • DC 12 Vadapter included
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
Weight0.50 kg1.58 kg0.50 kg1.14 kg2.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 1.58 kg
Weight 0.50 kg
Weight 1.14 kg
Weight 2.00 kg
Weight 0.30 kg