FOSTEX HP-A3 32-bit D/A Converter

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

• USB Bus power without using unwanted AC adapter
• Works with up to 24bit/96kHz audio source
• Exclusive PLL power supply is built in to reproduce the stable electrical supply
• High quality analog headphone amp to drive any type of headphones
• Equipped with hgih-grade AKM 32bit(*) DAC AK4390
• Condensers and OP amp designed exclusively for audio products
• USB / Digital (Optical) input selector
• Headphones / RCA (Analog) output selector
• Doubles as D/D converter from USB digital audio to Optical
• An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g

The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied.

Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.

Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.

• Super-high resolution USB to optical/DSD converter
• Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
• Signal-to-noise ratio: 112dB
• Extremely low distortion: THD+N 0.003%
• Digital (optical) and analog outputs
• Direct Stream Digital rates: DSD64, DSD128
• Dual headphone outputs: ¼-inch, 1/8-inch
• Compatible with headphones from 16–600 ohms
• USB-bus-powered or optional AC adapter

• Minimum System Requirements:
• M-Audio Windows Driver
• Windows 7
• OSx 10.9

• Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
• Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
• With this version, we added a standby function to lower the energy consumption
• On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
• Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
• More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal

Phono preamplifier with A/D converter and USB output

• Amplification and RIAA equalisation for MM & MC
• Design principle inspired by Dr. Sykora
• Digitalisation of vinyl for recording direct to USB with suitable recording programs
• Automatic recognition, no additional drivers needed
• Runs on Windows®, Mac OS® & Linux operating systems
• SMD circuitry with special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black or White casing

The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas