Content |
The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil
APPLICATIONS
- • Live performance
- • DJ set
- • Rental solutions
- • Permanent installations
General Specs
10" high power, 2.5" voice coil mid bass 1 x 2.5" high power titanium neo compression driver 130 dB max SPL 350 Watt AES High output, response down to 55 Hz Birch plywood cabinet Weather resistant, textured, polyurea finish Epoxy powder coated front grille
TRANSDUCERS
- Compression Driver:0“, 1.7" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:100 W PEAK, 50 WW AES
- Sensitivity:108dB
- Woofer:6“, 1.8" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:300 W PEAK, 150 WW AES
- Sensitivity:94dB
TRANSDUCERS
- Compression Driver:4“, 2.5" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:180 W PEAK 90 WW AES
- Sensitivity:98dB
- Woofer:10“, 2.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:500 W PEAK, 250 WW AES
- Sensitivity:110dB
Acoustical Specs
Frequency Response -10 dB:55 Hz ÷ 20000 Hz Max SPL @ 1m:130 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:94 dB Nominal Impedance:8 Ω Power Handling:350 W Peak Power Handling:1400 W Recommended Amplifier:700 W Protections:Dynamic Crossover frequencies:1000 Hz
Cabinet Specs
Cabinet Material:15mm Birch Plywood Hardware:Pole mount, 13 x M10 Pole Mount/Cap:yes Grille:Custom perforated steel grille Colour:black
Size/Weight
Height: 540 / 21.25 mm/inch Width:340 / 13.38 mm/inch Depth:333 / 13.11 mm/inch Net Weight:15 / 33.06 kg/lbs | MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
- 2-way, bass reflex design
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- ORIGINAL / LIVE The renowned, smooth FBT sound
- VOCAL A special EQ setting to maximise speech intelligibility
- DJ Designed to keep the energy high and your audience dancing
- TOURING The reliability and the roar of the industry’s most popular touring systems
- LOUDNESS The ultimate preset for listening at a medium or low volume
- WARM A special setting to emphasise full-bodied, low-mid frequencies.
Code: |
40682 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
80° x 50° rotatable HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
HP 50Hz - 12-24dB/oct |
Input connector: |
2 x SPEAKON |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.1/33.28 kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
17.6/38.80 kg/lb |
| The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg |
Specifications
Technical data
Speaker Type 2-Way Passive Speaker
Acoustical data
Nominal Power Rating 300 W/RMS
Program Power Rating 600 W/RMS
Peak Power Rating 900 W/RMS
Impedance 8 Ohms
Sensitivity 1W@1m 96 dB
Frequency Response [-10dB] 70 - 20.000 Hz
Frequency Response [+/- 3dB] 90 - 19.000 Hz
Max SPL 127 dB
HF 1 "
Type HF Compression Driver
Voice Coil HF 1.5 "
Driver Protection PTC
Directivity 90X70 °
Horn CD Horn Aluminium
Rotatable Horn Yes
Crossover Frequency (passive) 1800 Hz
Slope MF-HF 18 dB/Octave
LF 10 "
Voice Coil LF 2 "
Input Section
Signal Input 1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output 1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics
Housing Multiplex birch plywood
Housing Design Multifunctional
Color Black
Surface Texture Textured acrylic lacquer
Handles 1x on back
Pole Mount 36mm
Angles Up Monitore use 45 °
Front Grille 1.5 mm metall grille with acoustic foam in back
Rigging Points 12 x M8
Width 320 mm (12.8 in)
Height 508 mm (20.32 in)
Depth 320 mm (12.8 in)
Weight 14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components
|
Reviews
There are no reviews yet.