Content |
AC Current Capactiy:
Input - 10 Amp capacity required
Output - 10 Amps RMS (both outlets combined)
Linear Noise Attenuation:
> 40 dB @ 100 kHz.
>50 dB @ 500kHz
(Linear attenuation curve from 0.05 to 100 ohms line impedance)
Transient Voltage Surge Suppression:
230 VAC - Series Multi-Stage Protection
Non-Sacrificial with Zero Ground Contamination.
376V peak clamping @ 6000V 3000A input
Extreme Voltage Shutdown (>135 VAC)
Extreme Voltage Shutdown: 275 VAC (Auto-Reset)
Dimensions: 1.75ʼ H x 5ʼ W x 8.5ʼ D
Weight: 3 lbs.
Safety Agency Listing: CE
|
Rack lighting panel with two gooseneck. Dimmer. 12 V. lamps. I
ncludes power supply.
Dimensions: (W x H x D) 482 x 43 x 43 mm.
Weight: 2,5 kgs. |
- Rated @ 250 V, 16 A
- 16 x 45° angled outlets
- 8 front and 8 rear outlets with individual on/off switches
- Overload protection
The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
2 x 8
Power input
cables
Cable length
2 m
Cable connector
angled , Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
126 mm
Special feature
8 x Sockets back side , 8 x Sockets front side , Overload protection for front and rear side , Separate front and rear switches
Weight
1,7 kg
| Adam Hall Cables 87471 C20
19" Power Strip 1U 8-way with C20 cold device socket
- Power distributor with IEC C20 socket and detachable supply cable included
- Max. current 16 A
- 8 45° rotated Schuko sockets
- Illuminated mains switch
- 250 V operating voltage
Description
Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
Cabinet material
Aluminium
Other features
19" rack mains socket strips, Illuminated on / off switch
| The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.
Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.
Maximum Current: |
6 amps |
Line Cord: |
Captive AWG, 2.5M black cord with IEC Female to Schuko plug |
BNC Socket w/Switch: |
12VAC 500MA maxx (lamp not included) |
Operating Voltage: |
170 to 274 VAC |
Over-Voltage Shutdown: |
275 VAC Nominal |
Approximate Input Voltage Capture Range: |
174 to 264 VAC |
Spike Protection Mode: |
Line to neutral, zero ground leakage |
Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
Response Time: |
1 nanosecond |
Maximum Surge Current: |
6,500 Amps |
Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
Dimensions: |
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H) |
Weight: |
7 kg. |
Power Consumption: |
5 watts |
SPECIFICATIONS:
Maximum Current: |
6 amps |
Line Cord: |
Captive AWG, 2.5M black cord with IEC Female to Schuko plug |
BNC Socket w/Switch: |
12VAC 500MA maxx (lamp not included) |
Operating Voltage: |
170 to 274 VAC |
Over-Voltage Shutdown: |
275 VAC Nominal |
Approximate Input Voltage Capture Range: |
174 to 264 VAC |
Spike Protection Mode: |
Line to neutral, zero ground leakage |
Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
Response Time: |
1 nanosecond |
Maximum Surge Current: |
6,500 Amps |
Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
Dimensions: |
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H) |
Weight: |
7 kg. |
Power Consumption: |
5 watts |
|
The Furman PL-Plus C Power Conditioner protects your valuable equipment from mains power spikes and sags. Advanced Series Multi-Stage Protection Plus SMP+ circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Furman Linear Filtering Technology LiFT. The Furman PL-Plus features 8 rear-panel AC mains outlets and one front-panel AC mains outlet, a 10-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back panel connector for gooseneck lamp with front-panel switch, and a segmented LED voltmeter to monitor and display incoming line voltage. The Furman PL-Plus C fits in one 19-inch rack space.
Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so withFurman SMP+. With the PL-PLUS C's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no maintananc, no down time.
Unique to the Furman PL-PLUS C's SMP+ is its clamping voltage. Other designs offer clamping voltages that are well above 375VAC peak, the Furman PL-PLUS C's SMP+ clamps at 375VAC peak, even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology.
The Furman PL-PLUS C features LED rack lights which produce virtually no heat and provide an extremely long life. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. The Furman PL- PLUS C includes a rear mounted BNC jack which accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation
FURMAN PL-PLUS C E CLASSIC SERIES POWER CONDITIONER WITH VOLTMETER FEATURES
8 Rear-panel outlets and one front-panel outlet.
10-amp rating with circuit breaker.
Retractable LED rack lights with on/off/dimmer control.
BNC back panel connector for gooseneck lamp with front-panel switch.
Segmented LED voltmeter to monitor and display incoming line voltage.
Multi-stage protection.
Extreme voltage shutdown.
Linear filtering technology.
FURMAN PL-PLUS C CLASSIC SERIES POWER CONDITIONER SPECIFICATIONS
Maximum Output Current: 10 amps.
Pull-out Lights: Two multi-LED, dimmable lamps.
BNC Socket with Switch: Rear rack lamp, 12VAC 500mA maxx. Lamp not included.
Operating Voltage: 180 to 274 VAC.
Spike Protection Mode: Line to neutral, zero ground leakage.
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps.
Maximum Surge Current: 6,500 Amps.
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (mm, WxDxH): 482.6 x 266.7 x 4.45.
Weight: 6 kg.
Power Consumption: 12 watts.
|
Reviews
There are no reviews yet.