Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.

The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.

Symmetrically Balanced Power
Furmanʼs Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.

Unmatched Protection
Furmanʼs SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.

Innovative Convenience and Monitoring Features
The P-2300 IT Eʼs front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirements.

SPECIFICATIONS:

Furman M10Lx E Power Conditioner form the Merit Series Power Conditioners is the perfect low cost AC power solution for any rack mount system. Install an Furman M10LxE in to the top slot of your rack, and the 10 switched outlets in the rear panel will power up and protect all your equipment up to a 10 amp load. It not only protects anything plugged into it from spikes and surges, but also has a built in AC noise filter to rid the system of RFI / EMI interference.

TheFurman M-10Lx E also features two slide out, swivelling light fixtures to provide discreet illumination of your equipment. A dimmer knob allows the user to adjust the level of illumination. Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Features

• AC Noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Spike & surge protection ensures equipment stays safe and your power stays clean
• 10 rear panel outlets, with front panel convenience outlet
• 10 amp rating, with circuit breaker
• Two retractable LED light fixtures with dimmer control for convenient rack illumination
• Three year warranty

Specification

• Maximum Output Current: 10 amps
• Lamps: LED
• Operating Voltage: 230VAC 50Hz
• Spike Protection Mode: Line to neutral
• Peak Impulse Current: 12,000 amps
• Maximum Continuous Operating Voltage: 650 Volts
• Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
• Dimensions (inches, HxWxD): 1.75 x 19 x 7.5
• Weight: 2.3 kg

Adam Hall Cables 87471 C20

19" Power Strip 1U 8-way with C20 cold device socket

• Power distributor with IEC C20 socket and detachable supply cable included
• Max. current 16 A
• 8 45° rotated Schuko sockets
• Illuminated mains switch
• 250 V operating voltage

Description

• Rated @ 250 V, 16 A
• 16 x 45° angled outlets
• 8 front and 8 rear outlets with individual on/off switches
• Overload protection

The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.

Adam Hall Cables 87471

19" Power Strip 1U 8-way with switch

• Illuminated 2-pole switch on the front panel
• 8 mains outlets on the rear panel
• Black aluminium housing
• 54 mm deep
• 19 "angle can be mounted in four positions