Content | A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
Maximum Output Current: |
10 amps |
Line Cord: |
1.5 meter, removable, IEC C-13 female to Schuko male |
Operating Voltage: |
230VAC 50Hz |
Spike Protection Mode: |
Line to neutral |
Energy Dissipation: |
305 joules |
Peak Impulse Current: |
12,000 amps |
Maximum Continuous Opterating Voltage: |
650 Volts |
Noise Attenuation: |
Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz |
Dimensions: |
1.75” H x 19” W x 7.5” D |
Weight: |
2.3 kg. |
Safety Agency Listing: |
CE |
Warranty: |
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
| Adam Hall Cables 87471 X7
19" Power Strip 1U 7-way with switch & protection cap
- Mountable Power Strip from our 19" PDU range
- With recessed, illuminated switch and protective cap
- 7 Schuko sockets rotated 45°
- With 8-way adjustable mounting brackets
- 1.4 m PVC cable with angled Schuko plug
The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
7, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch with protective cap, Mounting brackets can be inserted in 8 positions
|
Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.
The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.
Symmetrically Balanced Power
Furmanʼs Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.
Unmatched Protection
Furmanʼs SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.
Innovative Convenience and Monitoring Features
The P-2300 IT Eʼs front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirements.
SPECIFICATIONS:
Maximum Current: | 10 amps | Line Cord: | Detachable cord, 1mm² x 3, 2.5M long, Schuko plug to IEC C13 | Operating Voltage: | 180 to 244 VAC, 50 Hz | Over-Voltage Shutdown: | 275 VAC Nominal | Spike Protection Mode: | Line to neutral, zero ground leakage | Spike Clamping Voltage: | 375 VAC peak @ 3,000 Amps | Response Time: | 1 nanosecond | Maximum Surge Current: | 6,500 Amps | Noise Attenuation: | 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz | Dimensions: | 483mm W x 356mm D x 133mm H (19” W x 14” D x 5.25” H) | Weight: | 43 kg. (95lbs.) | Power Consumption: | 18 watts (for display and control circuits) | Receptacles: | Fourteen IEC C-13 (two front panel, twelve rear panel) |
| Adam Hall Cables 87471 C20
19" Power Strip 1U 8-way with C20 cold device socket
- Power distributor with IEC C20 socket and detachable supply cable included
- Max. current 16 A
- 8 45° rotated Schuko sockets
- Illuminated mains switch
- 250 V operating voltage
Description
Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
Cabinet material
Aluminium
Other features
19" rack mains socket strips, Illuminated on / off switch
|
The Furman PL-Plus C Power Conditioner protects your valuable equipment from mains power spikes and sags. Advanced Series Multi-Stage Protection Plus SMP+ circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Furman Linear Filtering Technology LiFT. The Furman PL-Plus features 8 rear-panel AC mains outlets and one front-panel AC mains outlet, a 10-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back panel connector for gooseneck lamp with front-panel switch, and a segmented LED voltmeter to monitor and display incoming line voltage. The Furman PL-Plus C fits in one 19-inch rack space.
Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so withFurman SMP+. With the PL-PLUS C's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no maintananc, no down time.
Unique to the Furman PL-PLUS C's SMP+ is its clamping voltage. Other designs offer clamping voltages that are well above 375VAC peak, the Furman PL-PLUS C's SMP+ clamps at 375VAC peak, even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology.
The Furman PL-PLUS C features LED rack lights which produce virtually no heat and provide an extremely long life. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. The Furman PL- PLUS C includes a rear mounted BNC jack which accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation
FURMAN PL-PLUS C E CLASSIC SERIES POWER CONDITIONER WITH VOLTMETER FEATURES
8 Rear-panel outlets and one front-panel outlet.
10-amp rating with circuit breaker.
Retractable LED rack lights with on/off/dimmer control.
BNC back panel connector for gooseneck lamp with front-panel switch.
Segmented LED voltmeter to monitor and display incoming line voltage.
Multi-stage protection.
Extreme voltage shutdown.
Linear filtering technology.
FURMAN PL-PLUS C CLASSIC SERIES POWER CONDITIONER SPECIFICATIONS
Maximum Output Current: 10 amps.
Pull-out Lights: Two multi-LED, dimmable lamps.
BNC Socket with Switch: Rear rack lamp, 12VAC 500mA maxx. Lamp not included.
Operating Voltage: 180 to 274 VAC.
Spike Protection Mode: Line to neutral, zero ground leakage.
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps.
Maximum Surge Current: 6,500 Amps.
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (mm, WxDxH): 482.6 x 266.7 x 4.45.
Weight: 6 kg.
Power Consumption: 12 watts.
|
Furman M10Lx E Power Conditioner form the Merit Series Power Conditioners is the perfect low cost AC power solution for any rack mount system. Install an Furman M10LxE in to the top slot of your rack, and the 10 switched outlets in the rear panel will power up and protect all your equipment up to a 10 amp load. It not only protects anything plugged into it from spikes and surges, but also has a built in AC noise filter to rid the system of RFI / EMI interference.
TheFurman M-10Lx E also features two slide out, swivelling light fixtures to provide discreet illumination of your equipment. A dimmer knob allows the user to adjust the level of illumination. Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
Features
- AC Noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
- Spike & surge protection ensures equipment stays safe and your power stays clean
- 10 rear panel outlets, with front panel convenience outlet
- 10 amp rating, with circuit breaker
- Two retractable LED light fixtures with dimmer control for convenient rack illumination
- Three year warranty
Specification
- Maximum Output Current: 10 amps
- Lamps: LED
- Operating Voltage: 230VAC 50Hz
- Spike Protection Mode: Line to neutral
- Peak Impulse Current: 12,000 amps
- Maximum Continuous Operating Voltage: 650 Volts
- Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
- Dimensions (inches, HxWxD): 1.75 x 19 x 7.5
- Weight: 2.3 kg
|
Reviews
There are no reviews yet.